SourceCode/Bond/EAPSimulator/CHsmsActive.cpp

@@ -289,6 +289,18 @@
    return 0;
}

int CHsmsActive::hsmsSelectedEquipmentStatusRequest(unsigned int SVID)
{
    IMessage* pMessage = nullptr;
    int nRet = HSMS_Create1Message(pMessage, m_nSessionId, 1 | REPLY, 3, ++m_nSystemByte);

    pMessage->getBody()->addU4Item(SVID, "SVID");
    m_pActive->sendMessage(pMessage);
    HSMS_Destroy1Message(pMessage);

    return 0;
}

int CHsmsActive::hsmsQueryPPIDList()
{
    IMessage* pMessage = nullptr;

 SourceCode/Bond/EAPSimulator/CHsmsActive.h

@@ -6,6 +6,10 @@
#include "CCollectionEvent.h"


#define SVID_CJobSpace                5001
#define SVID_PJobSpace                5002


typedef std::function<void(void* pFrom, ACTIVESTATE state)> STATECHANGED;
typedef struct _ACTIVEListener
{
@@ -61,6 +65,9 @@
    int hsmsTransmitSpooledData();
    int hsmsPurgeSpooledData();

    // 查询变量
    int hsmsSelectedEquipmentStatusRequest(unsigned int SVID);

    // 查询PPID List
    int hsmsQueryPPIDList();


 SourceCode/Bond/EAPSimulator/EAPSimulator.rc

Binary files differ

 SourceCode/Bond/EAPSimulator/EAPSimulatorDlg.cpp

@@ -90,6 +90,8 @@
    ON_BN_CLICKED(IDC_BUTTON_QUERY_PPID_LIST, &CEAPSimulatorDlg::OnBnClickedButtonQueryPpidList)
    ON_BN_CLICKED(IDC_BUTTON_PROCEED_WITH_CARRIER, &CEAPSimulatorDlg::OnBnClickedButtonProceedWithCarrier)
    ON_BN_CLICKED(IDC_BUTTON_CARRIER_RELEASE, &CEAPSimulatorDlg::OnBnClickedButtonCarrierRelease)
    ON_BN_CLICKED(IDC_BUTTON_QUERY_CJ_SPACE, &CEAPSimulatorDlg::OnBnClickedButtonQueryCjSpace)
    ON_BN_CLICKED(IDC_BUTTON_QUERY_PJ_SPACE, &CEAPSimulatorDlg::OnBnClickedButtonQueryPjSpace)
END_MESSAGE_MAP()


@@ -279,6 +281,8 @@
    GetDlgItem(IDC_BUTTON_QUERY_PPID_LIST)->EnableWindow(enabled);    
    GetDlgItem(IDC_BUTTON_PROCEED_WITH_CARRIER)->EnableWindow(enabled);    
    GetDlgItem(IDC_BUTTON_CARRIER_RELEASE)->EnableWindow(enabled);
    GetDlgItem(IDC_BUTTON_QUERY_CJ_SPACE)->EnableWindow(enabled);
    GetDlgItem(IDC_BUTTON_QUERY_PJ_SPACE)->EnableWindow(enabled);
}

void CEAPSimulatorDlg::OnBnClickedButtonConnect()
@@ -376,6 +380,16 @@
    theApp.m_model.m_pHsmsActive->hsmsPurgeSpooledData();
}

void CEAPSimulatorDlg::OnBnClickedButtonQueryCjSpace()
{
    theApp.m_model.m_pHsmsActive->hsmsSelectedEquipmentStatusRequest(SVID_CJobSpace);
}

void CEAPSimulatorDlg::OnBnClickedButtonQueryPjSpace()
{
    theApp.m_model.m_pHsmsActive->hsmsSelectedEquipmentStatusRequest(SVID_PJobSpace);
}

void CEAPSimulatorDlg::OnBnClickedButtonQueryPpidList()
{
    theApp.m_model.m_pHsmsActive->hsmsQueryPPIDList();

 SourceCode/Bond/EAPSimulator/EAPSimulatorDlg.h

@@ -59,4 +59,6 @@
    afx_msg void OnBnClickedButtonQueryPpidList();
    afx_msg void OnBnClickedButtonProceedWithCarrier();
    afx_msg void OnBnClickedButtonCarrierRelease();
    afx_msg void OnBnClickedButtonQueryCjSpace();
    afx_msg void OnBnClickedButtonQueryPjSpace();
};

 SourceCode/Bond/EAPSimulator/Resource.h

@@ -46,10 +46,11 @@
#define IDC_EDIT_CE_NAME                1031
#define IDC_BUTTON_QUERY_PPID_LIST      1032
#define IDC_EDIT_CE_RPTID               1033
#define IDC_BUTTON_PROCEED_WITH_CARRIER 1033
#define IDC_BUTTON_TRANSMIT_SPOOLED_DATA 1034
#define IDC_BUTTON_PROCEED_WITH_CARRIER2 1035
#define IDC_BUTTON_CARRIER_RELEASE      1035
#define IDC_BUTTON_PROCEED_WITH_CARRIER 1034
#define IDC_BUTTON_TRANSMIT_SPOOLED_DATA 1035
#define IDC_BUTTON_CARRIER_RELEASE      1036
#define IDC_BUTTON_QUERY_CJ_SPACE       1037
#define IDC_BUTTON_QUERY_PJ_SPACE       1038

// Next default values for new objects
// 
@@ -57,7 +58,7 @@
#ifndef APSTUDIO_READONLY_SYMBOLS
#define _APS_NEXT_RESOURCE_VALUE        141
#define _APS_NEXT_COMMAND_VALUE         32771
#define _APS_NEXT_CONTROL_VALUE         1035
#define _APS_NEXT_CONTROL_VALUE         1039
#define _APS_NEXT_SYMED_VALUE           101
#endif
#endif

 SourceCode/Bond/Servo/CMaster.cpp

@@ -56,7 +56,7 @@
        m_bEnableAlarmReport = true;
        m_bContinuousTransfer = false;
        m_nContinuousTransferCount = 0;
        m_nContinuousTransferStep = CTStep_begin;
        m_nContinuousTransferStep = CTStep_Unknow;
        InitializeCriticalSection(&m_criticalSection);
    }

@@ -708,13 +708,15 @@
                // Measurement -> LoadPort
                for (int s = 0; s < 4; s++) {
                    PortType pt = pLoadPorts[s]->getPortType();
                    if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                    if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_Measurement)
                        && !rmd.armState[0] && pLoadPorts[s]->isEnable()
                        && (pt == PortType::Unloading || pt == PortType::Both)
                        && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                        for (int slot = 0; slot < SLOT_MAX; slot++) {
                            m_pActiveRobotTask = createTransferTask_continuous_transfer(pMeasurement,
                                0, pLoadPorts[s], slot);
                            if (m_pActiveRobotTask != nullptr) {
                                m_nContinuousTransferStep = CTStep_Measurement_LoadPort;
                                m_nContinuousTransferStep = CTStep_end;
                                goto CT_PORT_PUT;
                            }
@@ -727,10 +729,12 @@


                // BakeCooling ->Measurement
                if (!rmd.armState[0]) {
                if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling3)
                    && !rmd.armState[0]) {
                    m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                        3, pMeasurement, 0);
                    if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_BakeCooling_Measurement;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling -> Measurement)...");
                    }
                    CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
@@ -738,86 +742,104 @@

                
                // BakeCooling内部
                if (!rmd.armState[0]) {
                if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling2)
                    && !rmd.armState[0]) {
                    m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                        2, pBakeCooling, 3);
                    if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling3;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-2 -> BakeCooling-3)...");
                    }
                    CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
                }
                if (!rmd.armState[0]) {
                if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling1)
                    && !rmd.armState[0]) {
                    m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                        1, pBakeCooling, 2);
                    if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling2;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-1 -> BakeCooling-2)...");
                    }
                    CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
                }
                if (!rmd.armState[0]) {
                if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_VacuumBake_BakeCooling)
                    && !rmd.armState[0]) {
                    m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                        0, pBakeCooling, 1);
                    if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling1;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-0 -> BakeCooling-1)...");
                    }
                    CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
                }

                // VacuumBake(G1) -> BakeCooling
                if (!rmd.armState[0]) {
                if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_VacuumBake_VacuumBake)
                    && !rmd.armState[0]) {
                    m_pActiveRobotTask = createTransferTask_continuous_transfer(pVacuumBake,
                        1, pBakeCooling, 0);
                    if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_VacuumBake_BakeCooling;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(VacuumBake(G1) -> BakeCooling)...");
                    }
                    CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
                }

                // VacuumBake(G1) -> VacuumBake(G1)
                if (!rmd.armState[0]) {
                if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Bonder2_VacuumBake)
                    && !rmd.armState[0]) {
                    m_pActiveRobotTask = createTransferTask_continuous_transfer(pVacuumBake,
                        0, pVacuumBake, 1);
                    if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_VacuumBake_VacuumBake;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(VacuumBake(G1-0) -> VacuumBake(G1-1))...");
                    }
                    CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
                }

                // Bonder2 -> VacuumBake(G1)
                if (!rmd.armState[0]) {
                if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Bonder1_Bonder2)
                    && !rmd.armState[0]) {
                    m_pActiveRobotTask = createTransferTask_continuous_transfer(pBonder2,
                        1, pVacuumBake, 0);
                    if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_Bonder2_VacuumBake;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Bonder2 -> VacuumBake(G1))...");
                    }
                    CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
                }
                
                // Bonder1 -> Bonder2
                if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
                if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Fliper_Bonder1)
                    && !rmd.armState[0] && !pBonder2->hasBondClass()) {
                    m_pActiveRobotTask = createTransferTask_continuous_transfer(pBonder1,
                        1, pBonder2, 1);
                    if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_Bonder1_Bonder2;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Bonder1 -> Bonder2)...");
                    }
                    CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
                }

                // Fliper(G2) -> Bonder1
                if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
                if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Aligner_Fliper)
                    &&!rmd.armState[0] && !pBonder1->hasBondClass()) {
                    m_pActiveRobotTask = createTransferTask_continuous_transfer(pFliper,
                        0, pBonder1, 1, 2);
                        0, pBonder1, 1);
                    if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_Fliper_Bonder1;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Fliper(G2) -> Bonder1)...");
                    }
                    CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
                }

                // Aligner -> Fliper(G2)
                if (!rmd.armState[1]) {
                if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_LoadPort_Aligner)
                    && !rmd.armState[1]) {
                    m_pActiveRobotTask = createTransferTask_continuous_transfer(pAligner,
                        0, pFliper, 0);
                    if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_Aligner_Fliper;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Aligner -> Fliper(G2))...");
                    }
                    CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
@@ -826,13 +848,15 @@
                // LoadPort -> Aligner
                for (int s = 0; s < 4; s++) {
                    PortType pt = pLoadPorts[s]->getPortType();
                    if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                    if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_end)
                        && !rmd.armState[0] && pLoadPorts[s]->isEnable()
                        && (pt == PortType::Loading || pt == PortType::Both)
                        && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                        for (int slot = 0; slot < SLOT_MAX; slot++) {
                            m_pActiveRobotTask = createTransferTask_continuous_transfer(pLoadPorts[s], 
                                slot, pAligner, 0);
                            if (m_pActiveRobotTask != nullptr) {
                                m_nContinuousTransferStep = CTStep_LoadPort_Aligner;
                                LOGI("<ContinuousTransfer>千传测试，开始搬送任务(LoadPort -> Aligner)...");
                                pEFEM->setContext(m_pActiveRobotTask->getContext());
                                goto CT_PORT_GET;

 SourceCode/Bond/Servo/CMaster.h

@@ -15,8 +15,22 @@
#include "CRobotTask.h"


#define CTStep_begin        0
#define CTStep_end          99

#define CTStep_Unknow                   0
#define CTStep_LoadPort_Aligner         1
#define CTStep_Aligner_Fliper           2
#define CTStep_Fliper_Bonder1           3
#define CTStep_Bonder1_Bonder2          4
#define CTStep_Bonder2_VacuumBake       5
#define CTStep_VacuumBake_VacuumBake    6
#define CTStep_VacuumBake_BakeCooling   7
#define CTStep_BakeCooling_BakeCooling1 8
#define CTStep_BakeCooling_BakeCooling2 9
#define CTStep_BakeCooling_BakeCooling3 10
#define CTStep_BakeCooling_Measurement  11
#define CTStep_Measurement_LoadPort     12
#define CTStep_begin                    CTStep_LoadPort_Aligner
#define CTStep_end                      CTStep_Measurement_LoadPort

namespace SERVO {
    enum class MASTERSTATE {

 SourceCode/Bond/Servo/CVariable.cpp

@@ -125,4 +125,15 @@

        return strRet;
    }

    __int64 CVariable::getIntValue()
    {
        if (m_format == SVFromat::U1 || m_format == SVFromat::U2 || m_format == SVFromat::I2) {
            return m_nValue;
        }

        return 0;
    }


}

 SourceCode/Bond/Servo/CVariable.h

@@ -29,6 +29,7 @@
        void setValue(__int64 value);
        void setValue(const char* pszValue);
        std::string getValue();
        __int64 getIntValue();

    private:
        unsigned int m_nVarialbeId;

 SourceCode/Bond/Servo/HsmsPassive.cpp

@@ -103,6 +103,31 @@

}

void CHsmsPassive::addVariableValueToItem(ISECS2Item* pParent, SERVO::CVariable* pVariable)
{
    ASSERT(pParent);
    ASSERT(pVariable);

    SERVO::SVFromat format = pVariable->getFormat();
    switch (format)
    {
    case SERVO::SVFromat::U1:
        pParent->addU1Item((unsigned char)pVariable->getIntValue(), "SV");
        break;
    case SERVO::SVFromat::U2:
        pParent->addU2Item((unsigned char)pVariable->getIntValue(), "SV");
        break;
    case SERVO::SVFromat::I2:
        pParent->addI2Item((unsigned char)pVariable->getIntValue(), "SV");
        break;
    case SERVO::SVFromat::A20:
    case SERVO::SVFromat::A50:
        pParent->addItem(pVariable->getValue().c_str(), "SV");
    default:
        break;
    }
}

void CHsmsPassive::linkEventReport(unsigned int CEID, unsigned int RPTID)
{
    SERVO::CCollectionEvent* pEvent = getEvent(CEID);
@@ -536,6 +561,9 @@
            // S1F1
            replyAreYouThere(pMessage);
        }
        else if (nStream == 1 && pHeader->function == 3) {
            replySelectedEquipmentStatusData(pMessage);
        }
        else if (nStream == 1 && pHeader->function == 13) {
            replyEstablishCommunications(pMessage);
        }
@@ -902,6 +930,45 @@
    return 0;
}

int CHsmsPassive::replySelectedEquipmentStatusData(IMessage* pRecv)
{
    if (m_pPassive == NULL || STATE::SELECTED != m_pPassive->getState()) {
        return ER_NOTSELECT;
    }

    IMessage* pMessage = NULL;
    HSMS_Create1Message(pMessage, m_nSessionId, 1, 4, pRecv->getHeader()->systemBytes);
    ASSERT(pMessage);

    unsigned char SVU1 = 0;
    unsigned int SVID = 0;
    ISECS2Item* pBody = pRecv->getBody();
    if (pBody == nullptr || pBody->getType() != SITYPE::L) {
        pMessage->getBody()->addU1Item(SVU1, "SV");
        goto MYREPLY;
    }
    if (!pBody->getSubItemU4(0, SVID)) {
        pMessage->getBody()->addU1Item(SVU1, "SV");
        goto MYREPLY;
    }

    SERVO::CVariable* pVariable = getVariable(SVID);
    if (pVariable == nullptr) {
        pMessage->getBody()->addU1Item(SVU1, "SV");
        goto MYREPLY;
    }
    addVariableValueToItem(pMessage->getBody(), pVariable);

MYREPLY:
    m_pPassive->sendMessage(pMessage);
    LOGI("<HSMS>[SECS Msg SEND]%s", pMessage->toString());
    HSMS_Destroy1Message(pMessage);



    return 0;
}

// S2F13
int CHsmsPassive::replyEquipmentConstantRequest(IMessage* pRecv)
{

 SourceCode/Bond/Servo/HsmsPassive.h

@@ -115,6 +115,9 @@
    /* 设置软件版本号 最大长度 20 bytes */
    void setSoftRev(const char* pszRev);

    /* 添加变量值到ISECS2Item */
    void addVariableValueToItem(ISECS2Item* pParent, SERVO::CVariable* pVariable);

    // 连接Report
    void linkEventReport(unsigned int CEID, unsigned int RPTID);

@@ -188,6 +191,7 @@
    /* reply开头的函数为回复函数 */
    int replyAreYouThere(IMessage* pRecv);
    int replyEstablishCommunications(IMessage* pRecv);
    int replySelectedEquipmentStatusData(IMessage* pRecv);
    int replyOnLine(IMessage* pRecv);
    int replyOffLine(IMessage* pRecv);
    int replyEquipmentConstantRequest(IMessage* pRecv);

 SourceCode/Bond/Servo/ServoDlg.cpp

@@ -39,6 +39,8 @@
/* 运行时间定时器 */
#define TIMER_ID_UPDATE_RUMTIME            2

/* Test */
#define TIMER_ID_TEST                    3


// 用于应用程序“关于”菜单项的 CAboutDlg 对话框
@@ -332,7 +334,7 @@

    // model init
    theApp.m_model.init();

    SetTimer(TIMER_ID_TEST, 1000, nullptr);

    // 菜单
    CMenu menu;
@@ -875,6 +877,13 @@
        m_pMyStatusbar->setRunTimeText((LPTSTR)(LPCTSTR)strText);
    }

    else if(TIMER_ID_TEST == nIDEvent){
        static __int64 tttt = 0;
        tttt++;
        theApp.m_model.m_hsmsPassive.setVariableValue("CJobSpace", tttt % 10);
        theApp.m_model.m_hsmsPassive.setVariableValue("PJobSpace", tttt % 5);
    }


    CDialogEx::OnTimer(nIDEvent);
}

 SourceCode/Bond/x64/Debug/VariableList.txt

@@ -8,7 +8,6 @@
701,PreviousProcessState,U1,
800,EFEMPPExecName,A20,
801,EQPPExecName,A20,
1000,CJobSpace,U1,
2000,RbRAxisTorque,I2,机器人R轴扭矩
2001,RbLAxisTorque,l2,机器人L轴扭矩
2002,RbZAxisTorque,l2,机器人Z轴扭矩
@@ -36,3 +35,5 @@
2024,CCDEnable,U2,"CCD使能：O:开启 1：屏蔽"
2025,FFUParameter,U2,FFU设定值
5000,CarrierID,A20,卡匣ID
5001,CJobSpace,U1,CJ Space
5002,PJobSpace,U1,PJ Space