6.定时轮询比特位，修改为只轮询EFEM, Bonder1, Bonder2, BakeCooling, VacuuumBake, Measurent...

LAPTOP-SNT8I5JK\Boounion

2025-06-26 b54cb6d1d8742e94bd79623d4f410b3ff5abde86

 SourceCode/Bond/Servo/CMaster.cpp

@@ -1,6 +1,8 @@
#include "stdafx.h"
#include "Common.h"
#include "CMaster.h"
#include <future>
#include <vector>


namespace SERVO {
@@ -48,6 +50,7 @@
      m_ullRunTime = 0;
      m_state = MASTERSTATE::READY;
      m_pActiveRobotTask = nullptr;
      m_nLastError = 0;
      InitializeCriticalSection(&m_criticalSection);
   }

@@ -160,9 +163,9 @@
      ASSERT(pMeasurement);

      pEfem->setPort(0, pPort1);
      pEfem->setPort(1, pPort1);
      pEfem->setPort(2, pPort1);
      pEfem->setPort(3, pPort1);
      pEfem->setPort(1, pPort2);
      pEfem->setPort(2, pPort3);
      pEfem->setPort(3, pPort4);
      pEfem->setFliper(pFliper);
      pEfem->setAligner(pAligner);
      pEfem->setArmTray(0, pArmTray1);
@@ -264,6 +267,13 @@
      return 0;
   }

   void CMaster::clearError()
   {
      m_nLastError = 0;
      m_strLastError = "";
      setState(MASTERSTATE::READY);
   }

   ULONGLONG CMaster::getRunTime()
   {
      if (m_state == MASTERSTATE::RUNNING)
@@ -279,6 +289,40 @@

   unsigned CMaster::DispatchProc()
   {
      // 优先考虑的类型和次要类型
      // 一种情况，如果不分主次，一直搬G1, 等到Bonder1和Bonder2都放了G1, Aligner也放了G1,
      // Bonder1和Bonder2需要的G2就过不来了
      // 最基本的实现，可以G2和G2轮流搬送，但最好根据Bonder的需求来决定
      MaterialsType primaryType, secondaryType;


      // 各种机器
      CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
      CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
      CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
      CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
      CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
      CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
      CVacuumBake* pVacuumBake = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
      CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
      CBonder* pBonder1 = (CBonder*)getEquipment(EQ_ID_Bonder1);
      CBonder* pBonder2 = (CBonder*)getEquipment(EQ_ID_Bonder2);
      CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
      CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);

      ASSERT(pEFEM);
      ASSERT(pLoadPort1);
      ASSERT(pLoadPort2);
      ASSERT(pLoadPort3);
      ASSERT(pLoadPort4);
      ASSERT(pFliper);
      ASSERT(pVacuumBake);
      ASSERT(pAligner);
      ASSERT(pBonder1);
      ASSERT(pBonder2);
      ASSERT(pBakeCooling);
      ASSERT(pMeasurement);

      while (1) {
         // 待退出信号或时间到
         HANDLE hEvents[] = { m_hEventDispatchThreadExit[0], m_hDispatchEvent };
@@ -291,8 +335,114 @@
         // 如果状态为STARTING，开始工作并切换到RUNNING状态
         lock();
         if (m_state == MASTERSTATE::STARTING) {
            // 发送indexerOperationModeChange到各个机台，成功后切换到RUNNING状态
            // 否则切换到MSERROR状态
            int nRet;
            CEquipment* pEq[6] = { pEFEM, pBonder1, pBonder2, pBakeCooling, 
               pVacuumBake, pMeasurement};
            BOOL bIomcOk[7] = {FALSE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE};
            std::vector<std::promise<void>> promises(6);
            std::vector<std::future<void>> futures;

            nRet = pEq[0]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[0] = retCode == (int)RET::OK;
                  promises[0].set_value();
                  TRACE("a0001\n", writeCode, retCode);
               });
            if (nRet != 0) {
               LOGI("<Master>EFEM切换Start状态失败");
               m_strLastError = "EFEM切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[0].get_future());
            /*
            nRet = pEq[1]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[1] = retCode == (int)RET::OK;
                  promises[1].set_value();
                  TRACE("a0002\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Bonder1切换Start状态失败");
               m_strLastError = "Bonder1切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[1].get_future());

            nRet = pEq[2]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[2] = retCode == (int)RET::OK;
                  promises[2].set_value();
                  TRACE("a0003\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Bonder2切换Start状态失败");
               m_strLastError = "Bonder2切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[2].get_future());

            nRet = pEq[3]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[3] = retCode == (int)RET::OK;
                  promises[3].set_value();
                  TRACE("a0004\n");
               });
            if (nRet != 0) {
               LOGI("<Master>BakeCooling切换Start状态失败");
               m_strLastError = "BakeCooling切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[3].get_future());

            nRet = pEq[4]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[4] = retCode == (int)RET::OK;
                  promises[4].set_value();
                  TRACE("a0005\n");
               });
            if (nRet != 0) {
               LOGI("<Master>VacuumBake切换Start状态失败");
               m_strLastError = "VacuumBake切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[4].get_future());

            nRet = pEq[5]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[5] = retCode == (int)RET::OK;
                  promises[5].set_value();
                  TRACE("a0006\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Measurement切换Start状态失败");
               m_strLastError = "Measurement切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[5].get_future());
            */

WAIT:
            for (auto& f : futures) {
               f.wait();  // 阻塞等待对应设备完成
            }
            for (int i = 0; i < 6; i++) {
               if (!bIomcOk[i]) {
                  bIomcOk[6] = FALSE;
                  LOGI("<Master>%s切换Start状态失败", pEq[i]->getName().c_str());
               }
            }
				
            // 检查看是否都已经切换到START状态
            if (!bIomcOk[6]) {
               unlock();
               setState(MASTERSTATE::MSERROR);
               continue;
            }


            unlock();
            Sleep(1000);
            setState(MASTERSTATE::RUNNING);
            continue;
         }
@@ -301,7 +451,49 @@
         // 处理完成当前事务后，切换到停止或就绪状态
         else if (m_state == MASTERSTATE::STOPPING) {
            unlock();
            Sleep(1000);
            LOGI("<Master>开始切换各设备到 Stop 模式...");

            std::vector<std::promise<void>> promises(6);
            std::vector<std::future<void>> futures;
            BOOL bIomcOk[7] = { FALSE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE };

            int nRet;
            CEquipment* pEq[6] = { pEFEM, pBonder1, pBonder2, pBakeCooling,
               pVacuumBake, pMeasurement };

            for (int i = 0; i < 1; ++i) {
               nRet = pEq[i]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Stop,
                  [i, &promises, &bIomcOk](int writeCode, int retCode) -> void {
                     bIomcOk[i] = retCode == (int)RET::OK;
                     promises[i].set_value();
                     TRACE("s000%d: ret=%d\n", i + 1, retCode);
                  });
               if (nRet != 0) {
                  LOGI("<Master>%s切换Stop状态发送失败", pEq[i]->getName().c_str());
                  m_strLastError = pEq[i]->getName() + "切换Stop状态发送失败.";
                  bIomcOk[i] = FALSE;
                  promises[i].set_value(); // 避免 wait 阻塞
               }
               futures.push_back(promises[i].get_future());
            }

            for (auto& f : futures) {
               f.wait();  // 等待所有完成
            }

            for (int i = 0; i < 6; ++i) {
               if (!bIomcOk[i]) {
                  bIomcOk[6] = FALSE;
                  LOGI("<Master>%s切换Stop状态失败", pEq[i]->getName().c_str());
               }
            }

            if (!bIomcOk[6]) {
               setState(MASTERSTATE::MSERROR);
               continue;
            }

            LOGI("<Master>所有设备成功切换到 Stop 模式");
            setState(MASTERSTATE::READY);
            continue;
         }
@@ -309,82 +501,256 @@

         // 调度逻辑处理
         else if (m_state == MASTERSTATE::RUNNING) {
            unlock();
            LOGI("调度处理中...");
            // 检测判断robot状态
            RMDATA& rmd = pEFEM->getRobotMonitoringData();
            if (rmd.status != ROBOT_STATUS::Idle && rmd.status != ROBOT_STATUS::Run) {
               unlock();
               continue;
            }

            lock();
            if (m_pActiveRobotTask != nullptr) {
               if (m_pActiveRobotTask->isPicked()) {
                  m_pActiveRobotTask->place();
               }
               unlock();
               // 检测到当前有正在下午的任务，确保当前任务完成或中止后继续
               LOGI("检测到当前有正在下午的任务，确保当前任务完成或中止后继续...");
               continue;
            }

            // LoadPort -> Fliper(G2)
            CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
            CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
            CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
            CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
            ASSERT(pLoadPort1);
            ASSERT(pLoadPort2);
            ASSERT(pFliper);
            ASSERT(pVacuumBack);

            m_pActiveRobotTask = createTransferTask(pLoadPort1, pFliper);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            m_pActiveRobotTask = createTransferTask(pLoadPort2, pFliper);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               LOGI("创建新任务<%s>...", strDescription.c_str());
               // LOGI("检测到当前有正在下午的任务，确保当前任务完成或中止后继续...");
               continue;
            }



            // LoadPort -> VacuumBake(G1)
            m_pActiveRobotTask = createTransferTask(pLoadPort1, pVacuumBack);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               LOGI("创建新任务1<%s>...", strDescription.c_str());
               continue;
            // 此处检测优先类型和次要类型（G1或G2）
            // 如果其中一Bonder有单个玻璃，优先取它的配对类型，否则无所谓了
            primaryType = MaterialsType::G1;
            secondaryType = MaterialsType::G2;
            if ((!pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
               && (!pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
               // 如果G1和G2都满了，那就看Aligner, 如果Aligner有玻璃为G1, 则取G2
               CGlass* pGlass = pAligner->getGlassFromSlot(1);
               if (pGlass != nullptr && pGlass->getType() == MaterialsType::G1) {
                  primaryType = MaterialsType::G2;
                  secondaryType = MaterialsType::G1;
               }
            }

            m_pActiveRobotTask = createTransferTask(pLoadPort2, pVacuumBack);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               LOGI("创建新任务2<%s>...", strDescription.c_str());
               continue;
            else if ((pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
               || (pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
               primaryType = MaterialsType::G2;
               secondaryType = MaterialsType::G1;
            }



            // Fliper(G2) -> Aligner


            // VacuumBake(G1) -> Aligner


            // Aligner -> Bonder


            // Bonder -> BakeCooling


            // BakeCooling ->Measurement


            // Measurement -> LoadPort
            if (rmd.armState[0] || rmd.armState[1]) {
               LOGI("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"),
                  rmd.armState[1] ? _T("不可用") : _T("可用"));
            }
            CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
            CEquipment* pEqTar[] = { pVacuumBake, pFliper };
            if (primaryType == MaterialsType::G2) {
               pEqTar[0] = pFliper;
               pEqTar[1] = pVacuumBake;
            }
            for (int s = 0; s < 4; s++) {
               if (!rmd.armState[0] && pEqLoadPort[s]->isEnable()
                  && pEqLoadPort[s]->getPortType() == PortType::Unloading
                  && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     goto PORT_PUT;
                  }
               }
            }

         PORT_PUT:
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->pick();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }


            // BakeCooling ->Measurement
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }


				
            // BakeCooling内部
            // Bake -> Cooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }


            // Bonder -> BakeCooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }


            // Fliper(G2) -> Bonder
            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[1] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }

            if (!rmd.armState[1] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }

            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }

            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }


            // Aligner -> Fliper(G2)
            // Aligner -> VacuumBake(G1)
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }

            // LoadPort -> Aligner
            for (int s = 0; s < 4; s++) {
               if (!rmd.armState[0] && pEqLoadPort[s]->isEnable()
                  && pEqLoadPort[s]->getPortType() == PortType::Loading
                  && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
                  m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pAligner, primaryType, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     pEFEM->setContext(m_pActiveRobotTask->getContext());
                     goto PORT_GET;
                  }
               }
            }

PORT_GET:
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->pick();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            unlock();

@@ -409,12 +775,11 @@
            break;
         }

         // 读标志位
         for (auto item : m_listEquipment) {
            if (item->getID() == EQ_ID_Bonder1 ||
               item->getID() == EQ_ID_Bonder2) {
               const StationIdentifier& station = item->getStation();
               MemoryBlock& block = item->getReadBitBlock();

            const StationIdentifier& station = item->getStation();
            MemoryBlock& block = item->getReadBitBlock();
            if (block.end > block.start) {
               int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
                  block.start, block.size, block.buffer);
               if (0 == nRet) {
@@ -471,10 +836,10 @@
            if (m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getSrcSlot());
               if (pGlass != nullptr) {
                  CJobDataB* pJobDataBSrc = pGlass->getJobDataB();
                  if (pJobDataBSrc != nullptr
                     && pJobDataBSrc->getCassetteSequenceNo() == pJobDataB->getCassetteSequenceNo()
                     && pJobDataBSrc->getJobSequenceNo() == pJobDataB->getJobSequenceNo()) {
                  CJobDataS* pJobDataS = pGlass->getJobDataS();
                  if (pJobDataS != nullptr
                     && pJobDataS->getCassetteSequenceNo() == pJobDataB->getCassetteSequenceNo()
                     && pJobDataS->getJobSequenceNo() == pJobDataB->getJobSequenceNo()) {
                     bOk = TRUE;
                     LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
                  }
@@ -501,7 +866,18 @@
         BOOL bOk = FALSE;
         lock();
         if (m_pActiveRobotTask != nullptr) {
            if (m_pActiveRobotTask->getTarPosition() == p->getID()) {
            // 是否已经进入手臂(即取片完成),进入下一步，放片
            if (m_pActiveRobotTask->isPicking() && 
               ((m_pActiveRobotTask->getArmNo() == 1 && p->getID() == EQ_ID_ARM_TRAY1)
               || (m_pActiveRobotTask->getArmNo() == 2 && p->getID() == EQ_ID_ARM_TRAY2))
               ) {
               slot = 1;
               bOk = TRUE;
            }

            // 是否放片完成
            else if (m_pActiveRobotTask->isPlacing() &&
               m_pActiveRobotTask->getTarPosition() == p->getID()) {
               CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getTarSlot());
               if (pGlass == nullptr) {
                  bOk = TRUE;
@@ -509,15 +885,22 @@
                  LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
               }
            }
            else if (p->getID() == EQ_ID_ARM_TRAY1 || p->getID() == EQ_ID_ARM_TRAY2) {
               slot = 1;
               bOk = TRUE;

            // 是否回撤
            else if (m_pActiveRobotTask->isRestoring() &&
               m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getSrcSlot());
               if (pGlass == nullptr) {
                  bOk = TRUE;
                  slot = m_pActiveRobotTask->getSrcSlot();
                  LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
               }
            }
         }
         unlock();

         if (!bOk) {
            LOGE("<CMaster>onPreFethedOutJob, 数据校验失败.");
            LOGE("<CMaster>onPreStoredJob, 数据校验失败.");
         }

         return bOk;
@@ -534,31 +917,64 @@
         if (code == EDCC_FETCHOUT_JOB) {
            lock();
            if (m_pActiveRobotTask != nullptr && m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               m_pActiveRobotTask->fetchOut();
               LOGI("开始取片...");
            }
            unlock();
         }
         else if (code == EDCC_STORED_JOB) {
            lock();
            if (m_pActiveRobotTask != nullptr && m_pActiveRobotTask->getTarPosition() == p->getID()) {
            if (m_pActiveRobotTask != nullptr
               && m_pActiveRobotTask->isPicking()
               && ((m_pActiveRobotTask->getArmNo() == 1 && p->getID() == EQ_ID_ARM_TRAY1)
                  || (m_pActiveRobotTask->getArmNo() == 2 && p->getID() == EQ_ID_ARM_TRAY2))
               ) {
               LOGI("取片完成.");
               m_pActiveRobotTask->fetchOut();
               m_pActiveRobotTask->picked();
            }

            else if (m_pActiveRobotTask != nullptr
               && m_pActiveRobotTask->isPlacing() 
               && m_pActiveRobotTask->getTarPosition() == p->getID()) {
               m_pActiveRobotTask->stored();
               m_pActiveRobotTask->completed();
               LOGI("放片完成...");

               // 完成此条搬送任务，但要把数据和消息上抛应用层
               unlock();



               lock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_FINISH);
               }
               delete m_pActiveRobotTask;
               m_pActiveRobotTask = nullptr;
            }

            else if (m_pActiveRobotTask != nullptr
               && m_pActiveRobotTask->isRestoring()
               && m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               m_pActiveRobotTask->stored();
               m_pActiveRobotTask->restored();
               LOGI("回撤完成...");
               // 完成此条搬送任务，但要把数据和消息上抛应用层
               unlock();


               lock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_RESTORE);
               }
               delete m_pActiveRobotTask;
               m_pActiveRobotTask = nullptr;
               stop();
            }
            unlock();
         }
      };

      listener.onProcessStateChanged = [&](void* pEquipment, PROCESS_STATE state) -> void {
         LOGI("<Master>onProcessStateChanged<%d>", (int)state);
      };
      pEquipment->setListener(listener);
      pEquipment->setCcLink(&m_cclink);
      m_listEquipment.push_back(pEquipment);
@@ -613,7 +1029,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("Fliper(G2)");
      pEquipment->setDescription("Fliper(G2).");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x0, 0x0);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -630,7 +1046,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("VacuumBake(G1)");
      pEquipment->setDescription("VacuumBake(G1).");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x5c00, 0x66ff);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -648,7 +1064,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("Aligner");
      pEquipment->setDescription("Aligner.");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x0, 0x0);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -741,7 +1157,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("BakeCooling");
      pEquipment->setDescription("BakeCooling.");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x5100, 0x5bff);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -775,27 +1191,8 @@
      }


      // 按一定频率扫描LB数据
      static int i = 0;
      i++;
      /*
      if (i % (4 * 1) == 0) {

         for (auto item : m_listEquipment) {
            if (item->getID() == EQ_ID_Bonder1) {
               const StationIdentifier& station = item->getStation();
               MemoryBlock& block = item->getReadBitBlock();

               int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
                  block.start, block.size, block.buffer);
               if (0 == nRet) {
                  item->onReceiveLBData(block.buffer, block.size);
               }
            }
         }
      }
      */


      // 自动保存缓存
      if (i % (4 * 2) == 0) {
@@ -822,42 +1219,40 @@
      CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
      CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);

      nRet = pLoadPort1->getPin("Out1")->connectPin(pFliper->getPin("In1"));
      nRet = pLoadPort1->getPin("Out")->connectPin(pAligner->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-Fliper失败");
      }
      nRet = pLoadPort2->getPin("Out1")->connectPin(pFliper->getPin("In2"));
      nRet = pLoadPort2->getPin("Out")->connectPin(pAligner->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-Fliper失败");
      }

      nRet = pLoadPort1->getPin("Out2")->connectPin(pVacuumBake->getPin("In1"));
      nRet = pAligner->getPin("Out1")->connectPin(pFliper->getPin("In"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-VacuumBake失败");
         LOGE("连接Aligner-Fliper失败");
      }
      nRet = pLoadPort2->getPin("Out2")->connectPin(pVacuumBake->getPin("In2"));
      nRet = pAligner->getPin("Out2")->connectPin(pVacuumBake->getPin("In"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-VacuumBake失败");
         LOGE("连接Aligner-VacuumBake失败");
      }

      nRet = pFliper->getPin("Out")->connectPin(pAligner->getPin("In1"));
      nRet = pFliper->getPin("Out1")->connectPin(pBonder1->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接Fliper-Aligner失败");
         LOGE("连接Fliper-Bonder1失败");
      }
      nRet = pFliper->getPin("Out2")->connectPin(pBonder2->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接Fliper-Bonder2失败");
      }

      nRet = pVacuumBake->getPin("Out")->connectPin(pAligner->getPin("In2"));
      nRet = pVacuumBake->getPin("Out1")->connectPin(pBonder1->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接VacuumBake-Aligner失败");
         LOGE("连接VacuumBake-Bonder1失败");
      }

      nRet = pAligner->getPin("Out1")->connectPin(pBonder1->getPin("In"));
      nRet = pVacuumBake->getPin("Out2")->connectPin(pBonder2->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接Aligner-Bondere1失败");
      }

      nRet = pAligner->getPin("Out2")->connectPin(pBonder2->getPin("In"));
      if (nRet < 0) {
         LOGE("连接Aligner-Bondere2失败");
         LOGE("连接VacuumBake-Bonder2失败");
      }

      nRet = pBonder1->getPin("Out")->connectPin(pBakeCooling->getPin("In1"));
@@ -969,26 +1364,144 @@
   }

   static int taskSeqNo = 0;
   CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq)
   CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq,
      MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
      int armNo/* = 1*/)
   {
      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G1);
      pSrcSlot = pSrcEq->getNonEmptySlot(MaterialsType::G1);
      pTarSlot = pTarEq->getAvailableSlotForGlass(primaryType);
      pSrcSlot = pSrcEq->getProcessedSlot(primaryType);
      if (pSrcSlot == nullptr || nullptr == pTarSlot) {
         pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G2);
         pSrcSlot = pSrcEq->getNonEmptySlot(MaterialsType::G2);
         pTarSlot = pTarEq->getAvailableSlotForGlass(secondaryType);
         pSrcSlot = pSrcEq->getProcessedSlot(secondaryType);
      }


      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, armNo, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   CRobotTask* CMaster::createTransferTask_bonder_to_bakecooling(CEquipment* pSrcEq, CEquipment* pTarEq)
   {
      std::vector<int> slots = {1, 2};

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pTarSlot = pTarEq->getAvailableSlotForGlass2(MaterialsType::G1, slots);
      pSrcSlot = pSrcEq->getProcessedSlot(MaterialsType::G1);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   CRobotTask* CMaster::createTransferTask_bake_to_cooling(CEquipment* pSrcEq)
   {
      std::vector<int> slotsTar = { 3, 4 };
      std::vector<int> slotsSrc = { 1, 2 };

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pTarSlot = pSrcEq->getAvailableSlotForGlass2(MaterialsType::G1, slotsTar);
      pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slotsSrc);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   CRobotTask* CMaster::createTransferTask_bakecooling_to_measurement(CEquipment* pSrcEq, CEquipment* pTarEq)
   {
      std::vector<int> slots = { 3, 4 };

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G1);
      pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   int CMaster::abortCurrentTask()
   {
      lock();
      if (m_pActiveRobotTask != nullptr) {
         m_pActiveRobotTask->abort();
      }
      unlock();

      if (m_listener.onRobotTaskEvent != nullptr) {
         m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_ABORT);
      }

      lock();
      if (m_pActiveRobotTask != nullptr) {
         delete m_pActiveRobotTask;
         m_pActiveRobotTask = nullptr;
      }
      unlock();

      // 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
      stop();

      return 0;
   }

   int CMaster::restoreCurrentTask()
   {
      lock();
      if (m_pActiveRobotTask != nullptr) {
         m_pActiveRobotTask->restore();
      }
      unlock();


      return 0;
   }

   void CMaster::setPortType(unsigned int index, BOOL enable, int type, int mode,
      int cassetteType, int transferMode, BOOL autoChangeEnable)
   {
      ASSERT(index < 4);
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4};
      CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
      pPort->localEanblePort(enable);
      pPort->localSetPortType((SERVO::PortType)type);
      pPort->localSetPortMode((SERVO::PortMode)mode);
      pPort->localSetCessetteType((SERVO::CassetteType)cassetteType);
      pPort->localSetTransferMode((SERVO::TransferMode)transferMode);
      pPort->localAutoChangeEnable(autoChangeEnable);
   }
}