1.Glass的状态切换； 2.重新组织机器中Glass的序列化和反序列化；

LAPTOP-SNT8I5JK\Boounion

2025-09-11 71766e0946eaaf4473377a7943d6bc61da94a604

 SourceCode/Bond/Servo/CMaster.cpp

@@ -3,6 +3,9 @@
#include "CMaster.h"
#include <future>
#include <vector>
#include "RecipeManager.h"
#include <fstream>
#include "SerializeUtil.h"


namespace SERVO {
@@ -52,16 +55,30 @@
      m_pActiveRobotTask = nullptr;
      m_nLastError = 0;
      m_isCompareMapsBeforeProceeding = FALSE;
      m_bJobMode = FALSE;
      m_bEnableEventReport = true;
      m_bEnableAlarmReport = true;
      m_bContinuousTransfer = false;
      m_bBatch = false;
      m_nContinuousTransferCount = 0;
      m_nContinuousTransferStep = CTStep_begin;
      m_nContinuousTransferStep = CTStep_Unknow;
      m_pControlJob = nullptr;
      m_nTestFlag = 0;
      InitializeCriticalSection(&m_criticalSection);
   }

   CMaster::~CMaster()
   {
      // 释放Job相关
      for (auto item : m_processJobs) {
         delete item;
      }
      m_processJobs.clear();
      if (m_pControlJob != nullptr) {
         delete m_pControlJob;
         m_pControlJob = nullptr;
      }

      if (m_hEventReadBitsThreadExit[0] != nullptr) {
         ::CloseHandle(m_hEventReadBitsThreadExit[0]);
         m_hEventReadBitsThreadExit[0] = nullptr;
@@ -114,7 +131,7 @@
         BoardVersion version{};
         int nRet = m_cclink.GetBoardVersion(version);
         if (nRet == 0) {
            LOGI("版本信息：%s.", version.toString().c_str());
            LOGD("版本信息：%s.", version.toString().c_str());
         }
         else {
            LOGE("获取CC-Link版本信息失败.");
@@ -123,7 +140,7 @@
         BoardStatus status;
         nRet = m_cclink.GetBoardStatus(status);
         if (nRet == 0) {
            LOGI("状态：%s.", status.toString().c_str());
            LOGD("状态：%s.", status.toString().c_str());
         }
         else {
            LOGE("获取CC-Link状态失败.");
@@ -255,6 +272,7 @@
      }

      m_bContinuousTransfer = false;
      m_bBatch = false;
      setState(MASTERSTATE::STARTING);
      m_ullStartTime = GetTickCount64();

@@ -268,6 +286,21 @@
      }

      m_bContinuousTransfer = true;
      m_bBatch = false;
      setState(MASTERSTATE::STARTING);
      m_ullStartTime = GetTickCount64();

      return 0;
   }

   int CMaster::startBatch()
   {
      if (m_state != MASTERSTATE::READY) {
         return -1;
      }

      m_bContinuousTransfer = false;
      m_bBatch = true;
      setState(MASTERSTATE::STARTING);
      m_ullStartTime = GetTickCount64();

@@ -277,12 +310,28 @@
   int CMaster::stop()
   {
      // 运行时间为累加结果，本次停止时刷新；
      if (m_state != MASTERSTATE::RUNNING && m_state != MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER) {
      lock();
      if (m_state != MASTERSTATE::RUNNING && m_state != MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER
         && m_state != MASTERSTATE::RUNNING_BATCH) {
         unlock();
         return -1;
      }

      m_ullRunTime += (GetTickCount64() - m_ullStartTime);
      unlock();


      // 更新状态
      setState(MASTERSTATE::STOPPING);


      // ControlJob暂停
      lock();
      if (m_pControlJob != nullptr) {
         m_pControlJob->pause();
         saveState();
      }
      unlock();


      return 0;
   }
@@ -296,7 +345,8 @@

   ULONGLONG CMaster::getRunTime()
   {
      if (m_state == MASTERSTATE::RUNNING || m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER)
      if (m_state == MASTERSTATE::RUNNING || m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER
         || m_state == MASTERSTATE::RUNNING_BATCH)
         return m_ullRunTime + (GetTickCount64() - m_ullStartTime);
      else
         return m_ullRunTime;
@@ -372,7 +422,7 @@
                  TRACE("a0001\n", writeCode, retCode);
               });
            if (nRet != 0) {
               LOGI("<Master>EFEM切换Start状态失败");
               LOGE("<Master>EFEM切换Start状态失败");
               m_strLastError = "EFEM切换Start状态失败.";
               goto WAIT;
            }
@@ -385,7 +435,7 @@
                  TRACE("a0002\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Bonder1切换Start状态失败");
               LOGE("<Master>Bonder1切换Start状态失败");
               m_strLastError = "Bonder1切换Start状态失败.";
               goto WAIT;
            }
@@ -398,7 +448,7 @@
                  TRACE("a0003\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Bonder2切换Start状态失败");
               LOGE("<Master>Bonder2切换Start状态失败");
               m_strLastError = "Bonder2切换Start状态失败.";
               goto WAIT;
            }
@@ -411,7 +461,7 @@
                  TRACE("a0004\n");
               });
            if (nRet != 0) {
               LOGI("<Master>BakeCooling切换Start状态失败");
               LOGE("<Master>BakeCooling切换Start状态失败");
               m_strLastError = "BakeCooling切换Start状态失败.";
               goto WAIT;
            }
@@ -424,7 +474,7 @@
                  TRACE("a0005\n");
               });
            if (nRet != 0) {
               LOGI("<Master>VacuumBake切换Start状态失败");
               LOGE("<Master>VacuumBake切换Start状态失败");
               m_strLastError = "VacuumBake切换Start状态失败.";
               goto WAIT;
            }
@@ -437,7 +487,7 @@
                  TRACE("a0006\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Measurement切换Start状态失败");
               LOGE("<Master>Measurement切换Start状态失败");
               m_strLastError = "Measurement切换Start状态失败.";
               goto WAIT;
            }
@@ -451,7 +501,7 @@
            for (int i = 0; i < 6; i++) {
               if (!bIomcOk[i]) {
                  bIomcOk[6] = FALSE;
                  LOGI("<Master>%s切换Start状态失败", pEq[i]->getName().c_str());
                  LOGE("<Master>%s切换Start状态失败", pEq[i]->getName().c_str());
               }
            }
            
@@ -462,12 +512,13 @@
               continue;
            }


            unlock();
            if(!m_bContinuousTransfer)
               setState(MASTERSTATE::RUNNING);
            else 
            if(m_bContinuousTransfer)
               setState(MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER);
            else if (m_bBatch)
               setState(MASTERSTATE::RUNNING_BATCH);
            else
               setState(MASTERSTATE::RUNNING);

            continue;
         }
@@ -494,7 +545,7 @@
                     TRACE("s000%d: ret=%d\n", i + 1, retCode);
                  });
               if (nRet != 0) {
                  LOGI("<Master>%s切换Stop状态发送失败", pEq[i]->getName().c_str());
                  LOGE("<Master>%s切换Stop状态发送失败", pEq[i]->getName().c_str());
                  m_strLastError = pEq[i]->getName() + "切换Stop状态发送失败.";
                  bIomcOk[i] = FALSE;
                  promises[i].set_value(); // 避免 wait 阻塞
@@ -509,7 +560,7 @@
            for (int i = 0; i < 6; ++i) {
               if (!bIomcOk[i]) {
                  bIomcOk[6] = FALSE;
                  LOGI("<Master>%s切换Stop状态失败", pEq[i]->getName().c_str());
                  LOGE("<Master>%s切换Stop状态失败", pEq[i]->getName().c_str());
               }
            }

@@ -544,37 +595,62 @@
            }


            // 此处检测优先类型和次要类型（G1或G2）
            // 如果其中一Bonder有单个玻璃，优先取它的配对类型，否则无所谓了
            primaryType = MaterialsType::G1;
            secondaryType = MaterialsType::G2;
            if ((!pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
               && (!pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
               // 如果G1和G2都满了，那就看Aligner, 如果Aligner有玻璃为G1, 则取G2
               CGlass* pGlass = pAligner->getGlassFromSlot(1);
               if (pGlass != nullptr && pGlass->getType() == MaterialsType::G1) {
                  primaryType = MaterialsType::G2;
                  secondaryType = MaterialsType::G1;
               }
            // Bonder1、Bonder2、Fliper、VacuumBake、Aligner，统计G2和G1的数量, 配对组数, 多出的类型
            int nG2Count = 0, nG1Count = 0, nGlassGroup, nExtraType;
            if (pBonder1->slotHasGlass(0)) {
               nG2Count++;
            }
            else if ((pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
               || (pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
               primaryType = MaterialsType::G2;
               secondaryType = MaterialsType::G1;
            if (pBonder1->slotHasGlass(1)) {
               nG1Count++;
            }

            if (pBonder2->slotHasGlass(0)) {
               nG2Count++;
            }
            if (pBonder2->slotHasGlass(1)) {
               nG1Count++;
            }

            if (pFliper->slotHasGlass(0)) {
               nG2Count++;
            }

            if (pVacuumBake->slotHasGlass(0)) {
               nG1Count++;
            }
            if (pVacuumBake->slotHasGlass(1)) {
               nG1Count++;
            }

            CGlass* pTempGlass = pAligner->getGlassFromSlot(0);
            if (pTempGlass != nullptr) {
               MaterialsType type = pTempGlass->getType();
               if(type == MaterialsType::G1)
                  nG1Count++;
               else if (type == MaterialsType::G2)
                  nG2Count++;
            }
            nGlassGroup = min(nG1Count, nG2Count);
				
            if (nG1Count == nG2Count) {
               nExtraType = 0;
            }
            else if (nG1Count > nG2Count) {
               nExtraType = 1;
            }
            else {
               nExtraType = 2;
            }
            secondaryType = MaterialsType::G0;


            // Measurement -> LoadPort
            if (rmd.armState[0] || rmd.armState[1]) {
               LOGI("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"),
                  rmd.armState[1] ? _T("不可用") : _T("可用"));
            }
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Unloading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], primaryType, secondaryType);
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], MaterialsType::G1, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     goto PORT_PUT;
                  }
@@ -621,24 +697,270 @@


            // Fliper(G2) -> Bonder
            //m_nTestFlag = 1;
            //pVacuumBake->m_nTestFlag = 1;
            auto pSrcSlot = pVacuumBake->getProcessedSlot(MaterialsType::G1);
            //LOGI("<Master>pSrcSlot = %x", pSrcSlot,);
            if (pSrcSlot != nullptr && !rmd.armState[1]
               && pBonder1->canPlaceGlassInSlot(0)) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, MaterialsType::G2, MaterialsType::G0, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if (pSrcSlot != nullptr && !rmd.armState[1] 
               && pBonder2->canPlaceGlassInSlot(0)) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, MaterialsType::G2, MaterialsType::G0, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            //m_nTestFlag = 0
               ;
            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[0] && pBonder1->slotHasGlass(0) && !pBonder1->slotHasGlass(1)) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, MaterialsType::G1, MaterialsType::G0);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0] && pBonder2->slotHasGlass(0) && !pBonder2->slotHasGlass(1)) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, MaterialsType::G1, MaterialsType::G0);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Aligner -> Fliper(G2)
            // Aligner -> VacuumBake(G1)
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pFliper, MaterialsType::G2, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0]) {
               // m_nTestFlag = 1;
               if (m_nTestFlag == 1) LOGD("createTransferTask 004df %d, %d", MaterialsType::G1, secondaryType);
               m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, MaterialsType::G1, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
               m_nTestFlag = 0;
            }


            // Aligner -> LoadPort
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_restore(pAligner, pLoadPorts);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // LoadPort -> Aligner
            if (nGlassGroup >= 2) {
               unlock();
               continue;
            }

            if(nExtraType == 0)
               primaryType = MaterialsType::G2;
            else {
               primaryType = MaterialsType::G1;
            }

            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Loading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pLoadPorts[s], pAligner, primaryType, secondaryType, 1, m_bJobMode);
                  if (m_pActiveRobotTask != nullptr) {
                     CGlass* pGlass = (CGlass*)m_pActiveRobotTask->getContext();
                     if (pGlass->getBuddy() != nullptr) {
                        delete m_pActiveRobotTask;
                        m_pActiveRobotTask = nullptr;
                        continue;
                     }

                     pGlass->start();
                     pEFEM->setContext(m_pActiveRobotTask->getContext());
                     goto PORT_GET;
                  }
               }
            }

PORT_GET:
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            unlock();
            continue;
         }

         // 批处理模式，最终以此为准，但先保留之前的单片模式
         else if (m_state == MASTERSTATE::RUNNING_BATCH) {
            // 首选检查有没有CControlJob, 状态等
            if (m_pControlJob == nullptr) {
               unlock();
               continue;
            }
            CJState state = m_pControlJob->state();
            if (state == CJState::Completed || state == CJState::Aborted || state == CJState::Failed) {
               // ConrolJpb已完成
               LOGE("<Master>ControlJob已经完成或失败中断");
               unlock();
               continue;
            }


            if (m_pControlJob->state() == CJState::NoState) {
               LOGI("<Master>ControlJob已经进入列队");
               m_pControlJob->queue();
            }
            if (m_pControlJob->state() == CJState::Queued) {
               LOGI("<Master>ControlJob已经启动");
               m_pControlJob->start();

               if (m_listener.onCjStart != nullptr) {
                  m_listener.onCjStart(this, m_pControlJob);
               }
            }
            if (m_pControlJob->state() == CJState::Paused) {
               LOGI("<Master>ControlJob已经恢复运行");
               m_pControlJob->resume();
            }


            // 如果当前未选择CProcessJob, 选择一个
            if (m_inProcesJobs.empty()) {
               auto pj = acquireNextProcessJob();
               if (pj != nullptr) {
                  m_inProcesJobs.push_back(pj);

                  // 这里上报PJ Start事件
                  if (m_listener.onPjStart != nullptr) {
                     m_listener.onPjStart(this, pj);
                  }
               }
            }
            if (m_inProcesJobs.empty()) {
               LOGE("<Master>选择当前ProcessJob失败！");
               unlock();
               continue;
            }

            // 如果当前没有Glass, 选择
            if (m_queueGlasses.empty()) {
               int nCount = acquireGlassToQueue();
               LOGI("<Master>已加入 %d 块Glass到工艺列队！", nCount);
            }


            // 检测判断robot状态
            RMDATA& rmd = pEFEM->getRobotMonitoringData();
            if (rmd.status != ROBOT_STATUS::Idle && rmd.status != ROBOT_STATUS::Run) {
               unlock();
               continue;
            }

            if (m_pActiveRobotTask != nullptr) {
               if (m_pActiveRobotTask->isPicked()) {
                  m_pActiveRobotTask->place();
               }
               unlock();
               // 检测到当前有正在下午的任务，确保当前任务完成或中止后继续
               // LOGI("检测到当前有正在下午的任务，确保当前任务完成或中止后继续...");
               continue;
            }


            // 此处检测优先类型和次要类型（G1或G2）
            // 如果其中一Bonder有单个玻璃，优先取它的配对类型，否则无所谓了
            primaryType = MaterialsType::G1;
            secondaryType = MaterialsType::G2;
            if ((!pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
               && (!pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
               // 如果G1和G2都满了，那就看Aligner, 如果Aligner有玻璃为G1, 则取G2
               CGlass* pGlass = pAligner->getGlassFromSlot(1);
               if (pGlass != nullptr && pGlass->getType() == MaterialsType::G1) {
                  primaryType = MaterialsType::G2;
                  secondaryType = MaterialsType::G1;
               }
            }
            else if ((pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
               || (pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
               primaryType = MaterialsType::G2;
               secondaryType = MaterialsType::G1;
            }


            // Measurement -> LoadPort
            if (rmd.armState[0] || rmd.armState[1]) {
               LOGD("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"),
                  rmd.armState[1] ? _T("不可用") : _T("可用"));
            }
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Unloading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], primaryType, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     goto BATCH_PORT_PUT;
                  }
               }
            }

         BATCH_PORT_PUT:
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            // Measurement NG -> LoadPort
            // NG回原位
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_restore(pMeasurement, pLoadPorts);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // BakeCooling ->Measurement
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // BakeCooling内部
            // Bake -> Cooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Bonder -> BakeCooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Fliper(G2) -> Bonder
            auto pSrcSlot = pVacuumBake->getProcessedSlot(primaryType);
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder1->hasBondClass()) {
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder1->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder2->hasBondClass()) {
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder2->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
            if (!rmd.armState[0] && !pBonder1->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
            if (!rmd.armState[0] && !pBonder2->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
@@ -670,15 +992,38 @@
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Loading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pLoadPorts[s], pAligner, primaryType, secondaryType);
                  m_pActiveRobotTask = createTransferTask(pLoadPorts[s], pAligner, primaryType, secondaryType, m_bJobMode);
                  if (m_pActiveRobotTask != nullptr) {
                     pEFEM->setContext(m_pActiveRobotTask->getContext());
                     goto PORT_GET;
                     CGlass* pGlass = (CGlass*)m_pActiveRobotTask->getContext();
                     if (pGlass->getBuddy() != nullptr) {
                        delete m_pActiveRobotTask;
                        m_pActiveRobotTask = nullptr;
                        continue;
                     }

                     pEFEM->setContext(pGlass);
                     pGlass->start();
                     bool bMoved = glassFromQueueToInPorcess(pGlass);
                     if (bMoved) {
                        LOGI("<Master>Glass(%s)从等待列队到工艺列队转移成功.",
                           pGlass->getID().c_str());
                     }
                     else {
                        LOGE("<Master>Glass(%s)从等待列队到工艺列队转移失败.",
                           pGlass->getID().c_str());
                     }

                     // 这里上报Panel Start事件
                     if (m_listener.onPanelStart != nullptr) {
                        m_listener.onPanelStart(this, pGlass);
                     }

                     goto BATCH_PORT_GET;
                  }
               }
            }

PORT_GET:
         BATCH_PORT_GET:
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


@@ -708,13 +1053,15 @@
            // Measurement -> LoadPort
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
               if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_Measurement)
                  && !rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Unloading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  for (int slot = 0; slot < SLOT_MAX; slot++) {
                     m_pActiveRobotTask = createTransferTask_continuous_transfer(pMeasurement,
                        0, pLoadPorts[s], slot);
                     if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_Measurement_LoadPort;
                        m_nContinuousTransferStep = CTStep_end;
                        goto CT_PORT_PUT;
                     }
@@ -727,10 +1074,12 @@


            // BakeCooling ->Measurement
            if (!rmd.armState[0]) {
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling3)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  3, pMeasurement, 0);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_BakeCooling_Measurement;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling -> Measurement)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
@@ -738,86 +1087,104 @@

            
            // BakeCooling内部
            if (!rmd.armState[0]) {
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling2)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  2, pBakeCooling, 3);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling3;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-2 -> BakeCooling-3)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if (!rmd.armState[0]) {
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling1)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  1, pBakeCooling, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling2;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-1 -> BakeCooling-2)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if (!rmd.armState[0]) {
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_VacuumBake_BakeCooling)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  0, pBakeCooling, 1);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling1;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-0 -> BakeCooling-1)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // VacuumBake(G1) -> BakeCooling
            if (!rmd.armState[0]) {
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_VacuumBake_VacuumBake)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pVacuumBake,
                  1, pBakeCooling, 0);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_VacuumBake_BakeCooling;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(VacuumBake(G1) -> BakeCooling)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // VacuumBake(G1) -> VacuumBake(G1)
            if (!rmd.armState[0]) {
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Bonder2_VacuumBake)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pVacuumBake,
                  0, pVacuumBake, 1);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_VacuumBake_VacuumBake;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(VacuumBake(G1-0) -> VacuumBake(G1-1))...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // Bonder2 -> VacuumBake(G1)
            if (!rmd.armState[0]) {
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Bonder1_Bonder2)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBonder2,
                  1, pVacuumBake, 0);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_Bonder2_VacuumBake;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Bonder2 -> VacuumBake(G1))...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            
            // Bonder1 -> Bonder2
            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Fliper_Bonder1)
               && !rmd.armState[0] && !pBonder2->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBonder1,
                  1, pBonder2, 1);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_Bonder1_Bonder2;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Bonder1 -> Bonder2)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // Fliper(G2) -> Bonder1
            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Aligner_Fliper)
               &&!rmd.armState[0] && !pBonder1->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pFliper,
                  0, pBonder1, 1, 2);
                  0, pBonder1, 1);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_Fliper_Bonder1;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Fliper(G2) -> Bonder1)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // Aligner -> Fliper(G2)
            if (!rmd.armState[1]) {
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_LoadPort_Aligner)
               && !rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pAligner,
                  0, pFliper, 0);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_Aligner_Fliper;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Aligner -> Fliper(G2))...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
@@ -826,13 +1193,15 @@
            // LoadPort -> Aligner
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
               if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_end)
                  && !rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Loading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  for (int slot = 0; slot < SLOT_MAX; slot++) {
                     m_pActiveRobotTask = createTransferTask_continuous_transfer(pLoadPorts[s], 
                        slot, pAligner, 0);
                     if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_LoadPort_Aligner;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(LoadPort -> Aligner)...");
                        pEFEM->setContext(m_pActiveRobotTask->getContext());
                        goto CT_PORT_GET;
@@ -944,15 +1313,27 @@
         BOOL bOk = FALSE;
         lock();
         if (m_pActiveRobotTask != nullptr) {
            LOGD("<CMaster>onPreFethedOutJob 0001.");
            if (m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               LOGD("<CMaster>onPreFethedOutJob 0002.");
               CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getSrcSlot());
               if (pGlass != nullptr) {
                  LOGD("<CMaster>onPreFethedOutJob 0003.");
                  CJobDataS* pJobDataS = pGlass->getJobDataS();
                  if (pJobDataS != nullptr
                     && pJobDataS->getCassetteSequenceNo() == pJobDataB->getCassetteSequenceNo()
                     && pJobDataS->getJobSequenceNo() == pJobDataB->getJobSequenceNo()) {
                     bOk = TRUE;
                     LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
                     LOGD("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
                  }
                  LOGD("<CMaster>onPreFethedOutJob 0004.");
                  if (pJobDataS != nullptr) {
                     LOGD("<CMaster>onPreFethedOutJob 0005. %d,%d,%d,%d", 
                        pJobDataS->getCassetteSequenceNo(),
                        pJobDataB->getCassetteSequenceNo(),
                        pJobDataS->getJobSequenceNo(),
                        pJobDataB->getJobSequenceNo()
                        );
                  }
               }
            }
@@ -995,7 +1376,7 @@
               if (pGlass == nullptr) {
                  bOk = TRUE;
                  slot = m_pActiveRobotTask->getTarSlot();
                  LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
                  LOGI("<CMaster>onPreStoredJob, 已校验数据一致性.");
               }
            }

@@ -1006,7 +1387,7 @@
               if (pGlass == nullptr && m_pActiveRobotTask->getSrcSlot() == port) {
                  bOk = TRUE;
                  slot = m_pActiveRobotTask->getSrcSlot();
                  LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
                  LOGI("<CMaster>onPreStoredJob, 已校验数据一致性.");
               }
            }
         }
@@ -1064,6 +1445,50 @@

               LOGI("放片完成...");
               // 完成此条搬送任务，但要把数据和消息上抛应用层

               // 如果是搬送回从AOI搬送回Port, 则glass工艺完成
               if (m_pActiveRobotTask->getSrcPosition() == EQ_ID_MEASUREMENT) {
                  CGlass* pGlass = (CGlass*)m_pActiveRobotTask->getContext();
                  pGlass->complete();
                  this->saveState();
                  bool bMoved = glassFromInPorcessToComplete(pGlass);
                  if (bMoved) {
                     LOGI("<Master>Glass(%s)从工艺列队到完成列队转移成功.",
                        pGlass->getID().c_str());
                  }
                  else {
                     LOGE("<Master>Glass(%s)从工艺列队到完成列队转移失败.",
                        pGlass->getID().c_str());
                  }
                  if (m_listener.onPanelEnd != nullptr) {
                     m_listener.onPanelEnd(this, pGlass);
                  }

                  // 检查PJ是否已经完成
                  CProcessJob* pJob = getGlassProcessJob((CGlass*)m_pActiveRobotTask->getContext());
                  if (pJob != nullptr && checkAndUpdatePjComplete(pJob)) {
                     this->saveState();
                     LOGE("<Master>ProcessJob(%s)完成.",
                        pJob->id().c_str());
                     if (m_listener.onPjEnd != nullptr) {
                        m_listener.onPjEnd(this, pJob);
                     }

                     // 检查CJ是否已经完成
                     ASSERT(m_pControlJob);
                     if (checkAndUpdateCjComplete(m_pControlJob)) {
                        this->saveState();
                        LOGE("<Master>ControlJob(%s)完成.",
                           m_pControlJob->id().c_str());
                        if (m_listener.onCjEnd != nullptr) {
                           m_listener.onCjEnd(this, pJob);
                        }
                     }
                  }
               }



               unlock();


@@ -1105,9 +1530,48 @@
      };
      listener.onPortStatusChanged = [&](void* pEquipment, short status, __int64 data) {
         LOGE("<Master-%s>onPortStatusChanged。status=%d, data=%lld", ((CEquipment*)pEquipment)->getName().c_str(), status);
         if (status == PORT_INUSE && m_pControlJob != nullptr) {
            CLoadPort* pPort = (CLoadPort*)pEquipment;
            auto pjs = m_pControlJob->getPjs();
            for (auto pj : pjs) {
               auto carrier = pj->getCarrier(pPort->getCassetteId());
               if (carrier != nullptr) {
                  for (auto slot : carrier->slots) {
                     CGlass* pGlass = pPort->getGlassFromSlot(slot);
                     carrier->contexts.push_back((void*)pGlass);
                     if (pGlass != nullptr) {
                        pGlass->setProcessJob(pj);
                     }
                  }
               }
            }


         }
			
         if (m_listener.onLoadPortStatusChanged != nullptr) {
            m_listener.onLoadPortStatusChanged(this, (CEquipment*)pEquipment, status, data);
         }
      };
      listener.onSVDataReport = [&](void* pEquipment, void* pData) {
         CSVData* pSVData = (CSVData*)pData;
         auto rawData = pSVData->getSVRawData();
         std::vector<CParam> params;
         ((CEquipment*)pEquipment)->parsingSVData((const char*)rawData.data(), rawData.size(), params);
		
         std::string strOut;
         char szBuffer[256];
         for (auto p : params) {
            if (!strOut.empty()) strOut.append(",");
            if (p.getValueType() == PVT_INT) {
               sprintf_s(szBuffer, 256, "%s:%d", p.getName().c_str(), p.getIntValue());
            }
            else if (p.getValueType() == PVT_DOUBLE) {
               sprintf_s(szBuffer, 256, "%s:%f", p.getName().c_str(), p.getDoubleValue());
            }
            strOut.append(szBuffer);
         }
         LOGD("<CMaster-%s>SVDataReport:%s", ((CEquipment*)pEquipment)->getName().c_str(), strOut.c_str());
      };
      pEquipment->setListener(listener);
      pEquipment->setCcLink(&m_cclink);
@@ -1122,6 +1586,15 @@
   }

   CEquipment* CMaster::getEquipment(int id)
   {
      for (auto item : m_listEquipment) {
         if (item->getID() == id) return item;
      }

      return nullptr;
   }

   CEquipment* CMaster::getEquipment(int id) const
   {
      for (auto item : m_listEquipment) {
         if (item->getID() == id) return item;
@@ -1337,6 +1810,61 @@
         }
      }



      // 模拟测试
      static int aaa = 0;
      aaa++;
      if (aaa % 30 == 0) {
         if (!m_queueGlasses.empty()) {
            CGlass* pGlass = m_queueGlasses.front();
            pGlass->start();
            glassFromQueueToInPorcess(pGlass);
            this->saveState();

            // 这里上报Panel Start事件
            if (m_listener.onPanelStart != nullptr) {
               m_listener.onPanelStart(this, pGlass);
            }
         }
      }

      if (aaa % 45 == 0) {
         if (!m_inProcesGlasses.empty()) {
            CGlass* pGlass = m_inProcesGlasses.front();
            pGlass->complete();
            glassFromInPorcessToComplete(pGlass);
            this->saveState();

            // 这里上报Panel End事件
            if (m_listener.onPanelEnd != nullptr) {
               m_listener.onPanelEnd(this, pGlass);
            }

            CProcessJob* pJob = getGlassProcessJob(pGlass);
            if (pJob != nullptr && checkAndUpdatePjComplete(pJob)) {
               processJobFromInPorcessToComplete(pJob);
               this->saveState();
               LOGE("<Master>ProcessJob(%s)完成.",
                  pJob->id().c_str());
               if (m_listener.onPjEnd != nullptr) {
                  m_listener.onPjEnd(this, pJob);
               }

               // 检查CJ是否已经完成
               ASSERT(m_pControlJob);
               if (checkAndUpdateCjComplete(m_pControlJob)) {
                  this->saveState();
                  LOGE("<Master>ControlJob(%s)完成.",
                     m_pControlJob->id().c_str());
                  if (m_listener.onCjEnd != nullptr) {
                     m_listener.onCjEnd(this, pJob);
                  }
               }
            }
         }
      }
		
   }

   void CMaster::connectEquipments()
@@ -1501,21 +2029,22 @@
   static int taskSeqNo = 0;
   CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq,
      MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
      int armNo/* = 1*/)
      int armNo/* = 1*/, BOOL bJobMode/* = FALSE*/)
   {
      if (!pSrcEq->IsEnabled()) { 
         return nullptr;
      }

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pSrcEq->m_nTestFlag = m_nTestFlag;
      pTarSlot = pTarEq->getAvailableSlotForGlass(primaryType);
      pSrcSlot = pSrcEq->getProcessedSlot(primaryType);
      if (pSrcSlot == nullptr || nullptr == pTarSlot) {
      pSrcSlot = pSrcEq->getProcessedSlot(primaryType, bJobMode);
      if (m_nTestFlag == 1) LOGD("createTransferTask 003 %x, %x", pTarSlot, pSrcSlot);
      if (pSrcSlot == nullptr || nullptr == pTarSlot && secondaryType != SERVO::MaterialsType::G0) {
         pTarSlot = pTarEq->getAvailableSlotForGlass(secondaryType);
         pSrcSlot = pSrcEq->getProcessedSlot(secondaryType);
         pSrcSlot = pSrcEq->getProcessedSlot(secondaryType, bJobMode);
      }

      if (m_nTestFlag == 1) LOGD("createTransferTask 004 %x, %x", pTarSlot, pSrcSlot);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
@@ -1755,6 +2284,11 @@
      m_isCompareMapsBeforeProceeding = bCompare;
   }

   void CMaster::setJobMode(BOOL bJobMode)
   {
      m_bJobMode = bJobMode;
   }

   void CMaster::datetimeSync(SYSTEMTIME& time)
   {
      for (auto item : m_listEquipment) {
@@ -1807,4 +2341,375 @@
   {
      m_nContinuousTransferCount = round;
   }

   int CMaster::setProcessJobs(std::vector<CProcessJob*>& pjs)
   {
      std::vector<SERVO::CProcessJob*> temp;
      for (auto p : pjs) {
         if (p->validate(*this)) {
            p->queue();
            temp.push_back(p);
         }
      }

      m_processJobs = temp;
      this->saveState();

      return (int)m_processJobs.size();
   }

   std::vector<CProcessJob*>& CMaster::getProcessJobs()
   {
      return m_processJobs;
   }

   CProcessJob* CMaster::getProcessJob(const std::string& id)
   {
      for (auto item : m_processJobs) {
         if (item->id().compare(id) == 0) return item;
      }

      return nullptr;
   }

   int CMaster::setControlJob(CControlJob& controlJob)
   {
      // 回调：是否参创建ControlJob
      auto canCreateCjFn = [&](uint32_t& cc, std::string& mm) -> bool {
         if (m_pControlJob != nullptr) {
            cc = 1100;
            mm = "当前ControlJob未结批，不能创建新的ControlJob";
            return false;
         }
         return true;
      };


      // 回调：是否存在
      auto pjExists = [&](const std::string& id) -> bool {
         return getProcessJob(id) != nullptr;
      };

      // 回调：是否可加入 CJ（这里定义：必须是 Queued）
      auto pjJoinable = [&](const std::string& id) -> bool {
         auto pj = getProcessJob(id);
         if (pj == nullptr) return false;
         return pj->state() == PJState::Queued;
      };

      bool bRet = controlJob.validateForCreate(canCreateCjFn, pjExists, pjJoinable);
      if (!bRet) return -1;

      std::vector<CProcessJob*> temps;
      m_pControlJob = new CControlJob(controlJob);
      auto pjIds = controlJob.pjIds();
      for (auto id : pjIds) {
         auto pj = getProcessJob(id);
         if (pj != nullptr) {
            temps.push_back(pj);
         }
      }
      m_pControlJob->setPJs(temps);
      this->saveState();


      return 0;
   }

   CControlJob* CMaster::getControlJob()
   {
      return m_pControlJob;
   }

   CLoadPort* CMaster::getPortWithCarrierId(const std::string& carrierId) const
   {
      CLoadPort* pPort;
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4};
      for (int i = 0; i < 4; i++) {
         pPort = (CLoadPort*)getEquipment(eqid[i]);
         ASSERT(pPort);
         if (pPort->getCassetteId().compare(carrierId) == 0) return pPort;
      }

      return nullptr;
   }

   bool CMaster::isProcessJobsEmpty() const
   {
      return m_processJobs.empty();
   }

   bool CMaster::recipeExists(const std::string& ppid) const
   {
      std::vector<std::string> vecRecipe = RecipeManager::getInstance().getAllPPID();
      bool exists = std::find(vecRecipe.begin(), vecRecipe.end(), ppid) != vecRecipe.end();
      return exists;
   }

   bool CMaster::carrierPresent(const std::string& carrierId) const
   {
      CLoadPort* pPort = getPortWithCarrierId(carrierId);
      return pPort != nullptr;
   }

   bool CMaster::slotUsable(const std::string& carrierId, uint16_t slot) const
   {
      CLoadPort* pPort = getPortWithCarrierId(carrierId);
      if(pPort == nullptr) return false;
      CSlot* pSlot = pPort->getSlot(slot);
      if (pSlot == nullptr) return false;
      return pSlot->isEnable();
   }

   bool CMaster::ceidDefined(uint32_t ceid) const
   {
      return true;
   }

   bool CMaster::saveState() const
   {
      std::ofstream ofs(m_strStatePath, std::ios::binary);
      if (!ofs) return false;

      // 文件头
      uint32_t magic = 0x4D415354; // 'MAST'
      uint16_t version = 1;
      ofs.write(reinterpret_cast<const char*>(&magic), sizeof(magic));
      ofs.write(reinterpret_cast<const char*>(&version), sizeof(version));

      // 保存 ControlJob
      bool hasCJ = (m_pControlJob != nullptr);
      ofs.write(reinterpret_cast<const char*>(&hasCJ), sizeof(hasCJ));
      if (hasCJ) {
         m_pControlJob->serialize(ofs);
      }

      // 保存 ProcessJob 列表
      uint32_t count = static_cast<uint32_t>(m_processJobs.size());
      ofs.write(reinterpret_cast<const char*>(&count), sizeof(count));
      for (const auto& job : m_processJobs) {
         job->serialize(ofs);
      }

      // 以后可以在这里追加新字段
      return true;
   }

   bool CMaster::loadState(const std::string& path)
   {
      // 保存文件路径
      m_strStatePath = path;


      std::ifstream ifs(path, std::ios::binary);
      if (!ifs) return false;

      // 文件头
      uint32_t magic = 0;
      uint16_t version = 0;
      ifs.read(reinterpret_cast<char*>(&magic), sizeof(magic));
      ifs.read(reinterpret_cast<char*>(&version), sizeof(version));

      if (magic != 0x4D415354) {
         // 文件不合法
         return false;
      }

      if (m_pControlJob != nullptr) {
         delete m_pControlJob;
         m_pControlJob = nullptr;
      }

      // 读取 ControlJob
      bool hasCJ = false;
      ifs.read(reinterpret_cast<char*>(&hasCJ), sizeof(hasCJ));
      if (hasCJ) {
         m_pControlJob = new CControlJob();
         if (!CControlJob::deserialize(ifs, *m_pControlJob)) return false;
      }
      else {
         return false;
      }

      // 读取 ProcessJob 列表
      uint32_t count = 0;
      ifs.read(reinterpret_cast<char*>(&count), sizeof(count));
      m_processJobs.clear();
      for (uint32_t i = 0; i < count; i++) {
         CProcessJob* pProcessJob = new CProcessJob();
         if (!CProcessJob::deserialize(ifs, *pProcessJob)) return false;
         m_processJobs.push_back(pProcessJob);
      }


      // 找到CProcessJob指针加入列表中
      std::vector<CProcessJob*> tempPjs;
      auto ids = m_pControlJob->pjIds();
      for (auto id : ids) {
         auto pj = getProcessJob(id);
         if (pj != nullptr) {
            tempPjs.push_back(pj);
         }
      }
      m_pControlJob->setPJs(tempPjs);


      // 如果版本升级，可在这里判断 version 来加载新字段


      return true;
   }

   CProcessJob* CMaster::acquireNextProcessJob()
   {
      auto& pjs = m_pControlJob->getPjs();
      for (const auto pj : pjs) {
         if (pj->state() == PJState::Queued) {
            pj->start();
            return pj;
         }
      }


      return nullptr;
   }

   CGlass* CMaster::acquireNextGlass()
   {
      for (auto* pj : m_inProcesJobs) {
         // 遍历 PJ 的 carriers 和 slots
         for (auto& cs : pj->carriers()) {
            for (auto ctx : cs.contexts) {
               CGlass* pGlass = (CGlass*)ctx;
               if (pGlass->state() == GlsState::NoState) {
                  pGlass->queue();
                  return pGlass;
               }
            }
         }
      }
      return nullptr; // 没有可加工的 Glass
   }

   int CMaster::acquireGlassToQueue()
   {
      int nCount = 0;
      for (auto* pj : m_inProcesJobs) {
         // 遍历 PJ 的 carriers 和 slots
         for (auto& cs : pj->carriers()) {
            for (auto ctx : cs.contexts) {
               CGlass* pGlass = (CGlass*)ctx;
               if (pGlass->state() == GlsState::NoState) {
                  pGlass->queue();
                  if(addGlassToQueue(pGlass)) nCount++;
               }
            }
         }
      }
      return nCount;
   }

   bool CMaster::addGlassToQueue(CGlass* pGlass)
   {
      for (auto g : m_queueGlasses) {
         if (g == pGlass) return false;
      }

      m_queueGlasses.push_back(pGlass);
      return true;
   }

   bool CMaster::glassFromQueueToInPorcess(CGlass* pGlass)
   {
      auto it = std::find(m_queueGlasses.begin(), m_queueGlasses.end(), pGlass); 
      if (it != m_queueGlasses.end()) {
         m_inProcesGlasses.push_back(*it);
         m_queueGlasses.erase(it);
         return true;
      }
      return false;
   }

   bool CMaster::glassFromInPorcessToComplete(CGlass* pGlass)
   {
      auto it = std::find(m_inProcesGlasses.begin(), m_inProcesGlasses.end(), pGlass);
      if (it != m_inProcesGlasses.end()) {
         m_completeGlasses.push_back(*it);
         m_inProcesGlasses.erase(it);
         return true;
      }
      return false;
   }

   bool CMaster::processJobFromInPorcessToComplete(CProcessJob* pProcessJob)
   {
      auto it = std::find(m_inProcesJobs.begin(), m_inProcesJobs.end(), pProcessJob);
      if (it != m_inProcesJobs.end()) {
         m_completeProcessJobs.push_back(*it);
         m_inProcesJobs.erase(it);
         return true;
      }
      return false;
   }

   bool CMaster::checkAndUpdatePjComplete(CProcessJob* pJob)
   {
      ASSERT(pJob);
      auto state = pJob->state();
      if (state != PJState::InProcess && state != PJState::Paused) return false;

      for (auto c : pJob->carriers()) {
         for (auto g : c.contexts) {
            auto state = ((CGlass*)g)->state();
            if (state != GlsState::Aborted && state != GlsState::Completed
               && state != GlsState::Failed) return false;
         }
      }

      return pJob->complete();
   }

   bool CMaster::checkAndUpdateCjComplete(CControlJob* pJob)
   {
      ASSERT(pJob);
      auto state = pJob->state();
      if (state != CJState::Executing && state != CJState::Paused) return false;

      for (auto pj : pJob->getPjs()) {
         auto state = pj->state();
         if (state != PJState::Aborted && state != PJState::Completed
            && state != PJState::Failed) {
            return false;
         }
      }

      return pJob->complete();
   }

   CProcessJob* CMaster::getGlassProcessJob(CGlass* pGlass)
   {
      if (m_pControlJob == nullptr) return nullptr;
      for (auto pj : m_pControlJob->getPjs()) {
         for (auto c : pj->carriers()) {
            for (auto g : c.contexts) {
               if (g == pGlass) return pj;
            }
         }
      }

      return nullptr;
   }

   int CMaster::getWipGlasses(std::vector<CGlass*>& glasses)
   {
      for (auto eq : m_listEquipment) {
         auto p = dynamic_cast<CLoadPort*>(eq);
         if (p == nullptr) {
            eq->getAllGlass(glasses);
         }

      }

      return (int)glasses.size();
   }
}