From ffd3de44be70cfa45f2ad74b71daa55192296298 Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期四, 12 六月 2025 14:07:17 +0800
Subject: [PATCH] 1.调整物流传输顺序，将Aligner往前调到Fliper前面
---
SourceCode/Bond/Servo/CMaster.cpp | 217 ++++++++++++++++++++++++++++++++++++++---------------
1 files changed, 155 insertions(+), 62 deletions(-)
diff --git a/SourceCode/Bond/Servo/CMaster.cpp b/SourceCode/Bond/Servo/CMaster.cpp
index a73e03c..37fefe6 100644
--- a/SourceCode/Bond/Servo/CMaster.cpp
+++ b/SourceCode/Bond/Servo/CMaster.cpp
@@ -284,26 +284,35 @@
// Bonder1和Bonder2需要的G2就过不来了
// 最基本的实现，可以G2和G2轮流搬送，但最好根据Bonder的需求来决定
MaterialsType primaryType, secondaryType;
+ int armNo = 1; // 默认使用手臂2
// 各种机器
+ CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
+ CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
+ CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
- CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
+ CVacuumBake* pVacuumBake = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
CBonder* pBonder1 = (CBonder*)getEquipment(EQ_ID_Bonder1);
CBonder* pBonder2 = (CBonder*)getEquipment(EQ_ID_Bonder2);
CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
+ CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
+ ASSERT(pEFEM);
ASSERT(pLoadPort1);
ASSERT(pLoadPort2);
+ ASSERT(pLoadPort3);
+ ASSERT(pLoadPort4);
ASSERT(pFliper);
- ASSERT(pVacuumBack);
+ ASSERT(pVacuumBake);
ASSERT(pAligner);
ASSERT(pBonder1);
ASSERT(pBonder2);
ASSERT(pBakeCooling);
+ ASSERT(pMeasurement);
while (1) {
// 待退出信号或时间到
@@ -367,11 +376,56 @@
}
+ // Measurement -> LoadPort
+ CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
+ CEquipment* pEqTar[] = { pVacuumBake, pFliper };
+ if (primaryType == MaterialsType::G2) {
+ pEqTar[0] = pFliper;
+ pEqTar[1] = pVacuumBake;
+ }
+ for (int s = 0; s < 4; s++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Unloading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
+ m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_PUT;
+ }
+ }
+ }
+ PORT_PUT:
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+
+ // BakeCooling ->Measurement
+ m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+
// BakeCooling内部
// Bake -> Cooling
m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -385,6 +439,7 @@
// Bonder -> BakeCooling
m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -396,6 +451,7 @@
m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -405,9 +461,11 @@
continue;
}
- // Aligner -> Bonder
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType);
+ // Fliper(G2) -> Bonder
+ // VacuumBake(G1) -> Bonder
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -417,8 +475,9 @@
continue;
}
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -428,11 +487,9 @@
continue;
}
-
- // Fliper(G2) -> Aligner
- // VacuumBake(G1) -> Aligner
- m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -442,8 +499,9 @@
continue;
}
- m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -453,17 +511,11 @@
continue;
}
-
- // LoadPort -> Fliper(G2)
- // LoadPort -> VacuumBake(G1)
- CEquipment* pEqTar1 = pVacuumBack;
- CEquipment* pEqTar2 = pFliper;
- if (primaryType == MaterialsType::G2) {
- pEqTar1 = pFliper;
- pEqTar2 = pVacuumBack;
- }
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar1, primaryType, secondaryType);
+ // Aligner -> Fliper(G2)
+ // Aligner -> VacuumBake(G1)
+ m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -473,8 +525,9 @@
continue;
}
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar1, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -485,10 +538,21 @@
}
+ // LoadPort -> Aligner
+ for (int s = 0; s < 4; s++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Loading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
+ m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pAligner, primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_GET;
+ }
+ }
+ }
- // LoadPort -> VacuumBake(G1)
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar2, primaryType, secondaryType);
+PORT_GET:
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -497,25 +561,6 @@
LOGI("创建新任务<%s>...", strDescription.c_str());
continue;
}
-
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar2, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
-
- // BakeCooling ->Measurement
-
-
- // Measurement -> LoadPort
-
-
unlock();
@@ -957,42 +1002,40 @@
CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
- nRet = pLoadPort1->getPin("Out1")->connectPin(pFliper->getPin("In1"));
+ nRet = pLoadPort1->getPin("Out")->connectPin(pAligner->getPin("In1"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out1")->connectPin(pFliper->getPin("In2"));
+ nRet = pLoadPort2->getPin("Out")->connectPin(pAligner->getPin("In2"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort1->getPin("Out2")->connectPin(pVacuumBake->getPin("In1"));
+ nRet = pAligner->getPin("Out1")->connectPin(pFliper->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out2")->connectPin(pVacuumBake->getPin("In2"));
+ nRet = pAligner->getPin("Out2")->connectPin(pVacuumBake->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-VacuumBake失败");
}
- nRet = pFliper->getPin("Out")->connectPin(pAligner->getPin("In1"));
+ nRet = pFliper->getPin("Out1")->connectPin(pBonder1->getPin("In1"));
if (nRet < 0) {
- LOGE("连接Fliper-Aligner失败");
+ LOGE("连接Fliper-Bonder1失败");
+ }
+ nRet = pFliper->getPin("Out2")->connectPin(pBonder2->getPin("In1"));
+ if (nRet < 0) {
+ LOGE("连接Fliper-Bonder2失败");
}
- nRet = pVacuumBake->getPin("Out")->connectPin(pAligner->getPin("In2"));
+ nRet = pVacuumBake->getPin("Out1")->connectPin(pBonder1->getPin("In2"));
if (nRet < 0) {
- LOGE("连接VacuumBake-Aligner失败");
+ LOGE("连接VacuumBake-Bonder1失败");
}
-
- nRet = pAligner->getPin("Out1")->connectPin(pBonder1->getPin("In"));
+ nRet = pVacuumBake->getPin("Out2")->connectPin(pBonder2->getPin("In2"));
if (nRet < 0) {
- LOGE("连接Aligner-Bondere1失败");
- }
-
- nRet = pAligner->getPin("Out2")->connectPin(pBonder2->getPin("In"));
- if (nRet < 0) {
- LOGE("连接Aligner-Bondere2失败");
+ LOGE("连接VacuumBake-Bonder2失败");
}
nRet = pBonder1->getPin("Out")->connectPin(pBakeCooling->getPin("In1"));
@@ -1105,7 +1148,8 @@
static int taskSeqNo = 0;
CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq,
- MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/)
+ MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
+ int armNo/* = 1*/)
{
CRobotTask* pTask = nullptr;
CSlot* pSrcSlot, * pTarSlot;
@@ -1120,7 +1164,8 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
- pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ pTask->setRobotTransferParam(++taskSeqNo, armNo, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1140,6 +1185,7 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1161,6 +1207,7 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1168,4 +1215,50 @@
return pTask;
}
+
+ CRobotTask* CMaster::createTransferTask_bakecooling_to_measurement(CEquipment* pSrcEq, CEquipment* pTarEq)
+ {
+ std::vector<int> slots = { 3, 4 };
+
+ CRobotTask* pTask = nullptr;
+ CSlot* pSrcSlot, * pTarSlot;
+ pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G1);
+ pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);
+
+ if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ pTask = new CRobotTask();
+ pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ }
+
+
+ return pTask;
+ }
+
+ int CMaster::abortCurrentTask()
+ {
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->abort();
+ }
+ unlock();
+
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_ABORT);
+ }
+
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ delete m_pActiveRobotTask;
+ m_pActiveRobotTask = nullptr;
+ }
+ unlock();
+
+ // 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
+ stop();
+
+ return 0;
+ }
}
--
Gitblit v1.9.3