From f6e82f09bb6fb4727da61366c195cb99f3474e49 Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期五, 13 六月 2025 16:30:12 +0800
Subject: [PATCH] 1.将Port的配置数据从.dat文件驳离到ini文件中。
---
SourceCode/Bond/Servo/CMaster.cpp | 285 +++++++++++++++++++++++++++++++++++++++-----------------
1 files changed, 198 insertions(+), 87 deletions(-)
diff --git a/SourceCode/Bond/Servo/CMaster.cpp b/SourceCode/Bond/Servo/CMaster.cpp
index 6a7437a..21d96bc 100644
--- a/SourceCode/Bond/Servo/CMaster.cpp
+++ b/SourceCode/Bond/Servo/CMaster.cpp
@@ -290,8 +290,10 @@
CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
+ CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
+ CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
- CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
+ CVacuumBake* pVacuumBake = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
CBonder* pBonder1 = (CBonder*)getEquipment(EQ_ID_Bonder1);
CBonder* pBonder2 = (CBonder*)getEquipment(EQ_ID_Bonder2);
@@ -301,8 +303,10 @@
ASSERT(pEFEM);
ASSERT(pLoadPort1);
ASSERT(pLoadPort2);
+ ASSERT(pLoadPort3);
+ ASSERT(pLoadPort4);
ASSERT(pFliper);
- ASSERT(pVacuumBack);
+ ASSERT(pVacuumBake);
ASSERT(pAligner);
ASSERT(pBonder1);
ASSERT(pBonder2);
@@ -371,10 +375,41 @@
}
+ // Measurement -> LoadPort
+ CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
+ CEquipment* pEqTar[] = { pVacuumBake, pFliper };
+ if (primaryType == MaterialsType::G2) {
+ pEqTar[0] = pFliper;
+ pEqTar[1] = pVacuumBake;
+ }
+ for (int s = 0; s < 4; s++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Unloading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
+ m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_PUT;
+ }
+ }
+ }
+
+ PORT_PUT:
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->pick();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+
// BakeCooling ->Measurement
m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
+ m_pActiveRobotTask->pick();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -389,7 +424,7 @@
// Bake -> Cooling
m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
+ m_pActiveRobotTask->pick();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -403,7 +438,7 @@
// Bonder -> BakeCooling
m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
+ m_pActiveRobotTask->pick();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -415,7 +450,7 @@
m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
+ m_pActiveRobotTask->pick();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -425,10 +460,11 @@
continue;
}
- // Aligner -> Bonder
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType);
+ // Fliper(G2) -> Bonder
+ // VacuumBake(G1) -> Bonder
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
+ m_pActiveRobotTask->pick();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -438,9 +474,9 @@
continue;
}
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
+ m_pActiveRobotTask->pick();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -450,12 +486,9 @@
continue;
}
-
- // Fliper(G2) -> Aligner
- // VacuumBake(G1) -> Aligner
- m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
+ m_pActiveRobotTask->pick();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -465,9 +498,9 @@
continue;
}
- m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
+ m_pActiveRobotTask->pick();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -477,18 +510,11 @@
continue;
}
-
- // LoadPort -> Fliper(G2)
- // LoadPort -> VacuumBake(G1)
- CEquipment* pEqTar1 = pVacuumBack;
- CEquipment* pEqTar2 = pFliper;
- if (primaryType == MaterialsType::G2) {
- pEqTar1 = pFliper;
- pEqTar2 = pVacuumBack;
- }
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar1, primaryType, secondaryType);
+ // Aligner -> Fliper(G2)
+ // Aligner -> VacuumBake(G1)
+ m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType, 2);
if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
+ m_pActiveRobotTask->pick();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -498,9 +524,9 @@
continue;
}
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar1, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
+ m_pActiveRobotTask->pick();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -511,11 +537,21 @@
}
+ // LoadPort -> Aligner
+ for (int s = 0; s < 4; s++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Loading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
+ m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pAligner, primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_GET;
+ }
+ }
+ }
- // LoadPort -> VacuumBake(G1)
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar2, primaryType, secondaryType);
+PORT_GET:
if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
+ m_pActiveRobotTask->pick();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -524,23 +560,6 @@
LOGI("创建新任务<%s>...", strDescription.c_str());
continue;
}
-
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar2, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
-
- // Measurement -> LoadPort
-
-
unlock();
@@ -658,17 +677,24 @@
BOOL bOk = FALSE;
lock();
if (m_pActiveRobotTask != nullptr) {
- if (m_pActiveRobotTask->getTarPosition() == p->getID()) {
+ // 是否已经进入手臂(即取片完成),进入下一步，放片
+ if (m_pActiveRobotTask->isPicking() &&
+ ((m_pActiveRobotTask->getArmNo() == 1 && p->getID() == EQ_ID_ARM_TRAY1)
+ || (m_pActiveRobotTask->getArmNo() == 2 && p->getID() == EQ_ID_ARM_TRAY2))
+ ) {
+ slot = 1;
+ bOk = TRUE;
+ }
+
+ // 是否放片完成
+ else if (m_pActiveRobotTask->isPlacing() &&
+ m_pActiveRobotTask->getTarPosition() == p->getID()) {
CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getTarSlot());
if (pGlass == nullptr) {
bOk = TRUE;
slot = m_pActiveRobotTask->getTarSlot();
LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
}
- }
- else if (p->getID() == EQ_ID_ARM_TRAY1 || p->getID() == EQ_ID_ARM_TRAY2) {
- slot = 1;
- bOk = TRUE;
}
}
unlock();
@@ -691,21 +717,30 @@
if (code == EDCC_FETCHOUT_JOB) {
lock();
if (m_pActiveRobotTask != nullptr && m_pActiveRobotTask->getSrcPosition() == p->getID()) {
- m_pActiveRobotTask->fetchOut();
LOGI("开始取片...");
}
unlock();
}
else if (code == EDCC_STORED_JOB) {
lock();
- if (m_pActiveRobotTask != nullptr && m_pActiveRobotTask->getTarPosition() == p->getID()) {
+ if (m_pActiveRobotTask != nullptr
+ && m_pActiveRobotTask->isPicking()
+ && ((m_pActiveRobotTask->getArmNo() == 1 && p->getID() == EQ_ID_ARM_TRAY1)
+ || (m_pActiveRobotTask->getArmNo() == 2 && p->getID() == EQ_ID_ARM_TRAY2))
+ ) {
+ LOGI("取片完成.");
+ m_pActiveRobotTask->fetchOut();
+ m_pActiveRobotTask->place();
+ }
+
+ else if (m_pActiveRobotTask != nullptr
+ && m_pActiveRobotTask->isPlacing()
+ && m_pActiveRobotTask->getTarPosition() == p->getID()) {
m_pActiveRobotTask->stored();
m_pActiveRobotTask->completed();
LOGI("放片完成...");
-
// 完成此条搬送任务，但要把数据和消息上抛应用层
unlock();
-
lock();
@@ -982,42 +1017,40 @@
CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
- nRet = pLoadPort1->getPin("Out1")->connectPin(pFliper->getPin("In1"));
+ nRet = pLoadPort1->getPin("Out")->connectPin(pAligner->getPin("In1"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out1")->connectPin(pFliper->getPin("In2"));
+ nRet = pLoadPort2->getPin("Out")->connectPin(pAligner->getPin("In2"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort1->getPin("Out2")->connectPin(pVacuumBake->getPin("In1"));
+ nRet = pAligner->getPin("Out1")->connectPin(pFliper->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out2")->connectPin(pVacuumBake->getPin("In2"));
+ nRet = pAligner->getPin("Out2")->connectPin(pVacuumBake->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-VacuumBake失败");
}
- nRet = pFliper->getPin("Out")->connectPin(pAligner->getPin("In1"));
+ nRet = pFliper->getPin("Out1")->connectPin(pBonder1->getPin("In1"));
if (nRet < 0) {
- LOGE("连接Fliper-Aligner失败");
+ LOGE("连接Fliper-Bonder1失败");
+ }
+ nRet = pFliper->getPin("Out2")->connectPin(pBonder2->getPin("In1"));
+ if (nRet < 0) {
+ LOGE("连接Fliper-Bonder2失败");
}
- nRet = pVacuumBake->getPin("Out")->connectPin(pAligner->getPin("In2"));
+ nRet = pVacuumBake->getPin("Out1")->connectPin(pBonder1->getPin("In2"));
if (nRet < 0) {
- LOGE("连接VacuumBake-Aligner失败");
+ LOGE("连接VacuumBake-Bonder1失败");
}
-
- nRet = pAligner->getPin("Out1")->connectPin(pBonder1->getPin("In"));
+ nRet = pVacuumBake->getPin("Out2")->connectPin(pBonder2->getPin("In2"));
if (nRet < 0) {
- LOGE("连接Aligner-Bondere1失败");
- }
-
- nRet = pAligner->getPin("Out2")->connectPin(pBonder2->getPin("In"));
- if (nRet < 0) {
- LOGE("连接Aligner-Bondere2失败");
+ LOGE("连接VacuumBake-Bonder2失败");
}
nRet = pBonder1->getPin("Out")->connectPin(pBakeCooling->getPin("In1"));
@@ -1130,7 +1163,8 @@
static int taskSeqNo = 0;
CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq,
- MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/)
+ MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
+ int armNo/* = 1*/)
{
CRobotTask* pTask = nullptr;
CSlot* pSrcSlot, * pTarSlot;
@@ -1143,11 +1177,14 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
- pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, armNo, srcPos,
+ tarPos, srcSlot, tarSlot);
}
@@ -1164,11 +1201,14 @@
pSrcSlot = pSrcEq->getProcessedSlot(MaterialsType::G1);
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
- pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, srcPos,
+ tarPos, srcSlot, tarSlot);
}
@@ -1186,11 +1226,14 @@
pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slotsSrc);
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
- pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, srcPos,
+ tarPos, srcSlot, tarSlot);
}
@@ -1207,14 +1250,68 @@
pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
- pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
- pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, srcPos,
+ tarPos, srcSlot, tarSlot);
}
return pTask;
+ }
+
+ void CMaster::transformPosAndSlot(int srcPos, int srcSlot, int& tarPos, int& tarSlot)
+ {
+ switch (srcPos)
+ {
+ case EQ_ID_LOADPORT1:
+ case EQ_ID_LOADPORT2:
+ case EQ_ID_LOADPORT3:
+ case EQ_ID_LOADPORT4:
+ case EQ_ID_ARM_TRAY1:
+ case EQ_ID_ARM_TRAY2:
+ case EQ_ID_ALIGNER:
+ case EQ_ID_FLIPER:
+ tarPos = srcPos;
+ tarSlot = 1;
+ break;
+ case EQ_ID_Bonder1:
+ if (1 <= srcSlot && srcSlot <= 2) {
+ tarPos = 9 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_Bonder2:
+ if (1 <= srcSlot && srcSlot <= 2) {
+ tarPos = 11 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_VACUUMBAKE:
+ if (1 <= srcSlot && srcSlot <= 2) {
+ tarPos = 13 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_BAKE_COOLING:
+ if (1 <= srcSlot && srcSlot <= 4) {
+ tarPos = 15 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_MEASUREMENT:
+ tarPos = 19;
+ tarSlot = 1;
+ break;
+ default:
+ tarPos = srcPos;
+ tarSlot = srcSlot;
+ break;
+ }
}
int CMaster::abortCurrentTask()
@@ -1241,4 +1338,18 @@
return 0;
}
+
+ void CMaster::setPortType(unsigned int index, BOOL enable, int type, int mode,
+ int cassetteType, int transferMode, BOOL autoChangeEnable)
+ {
+ ASSERT(index < 4);
+ int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4};
+ CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
+ pPort->localEanblePort(enable);
+ pPort->localSetPortType((SERVO::PortType)type);
+ pPort->localSetPortMode((SERVO::PortMode)mode);
+ pPort->localSetCessetteType((SERVO::CassetteType)cassetteType);
+ pPort->localSetTransferMode((SERVO::TransferMode)transferMode);
+ pPort->localAutoChangeEnable(autoChangeEnable);
+ }
}
--
Gitblit v1.9.3