From e731e05bb712765bf85a359ff4d505e39ca09c02 Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期二, 01 七月 2025 14:19:01 +0800
Subject: [PATCH] 1.Port Status 测试； 2.Cassette ctrl cmd测试和修改地址；
---
SourceCode/Bond/Servo/CEFEM.cpp | 97 ++++++++++++++++++++----------------------------
1 files changed, 40 insertions(+), 57 deletions(-)
diff --git a/SourceCode/Bond/Servo/CEFEM.cpp b/SourceCode/Bond/Servo/CEFEM.cpp
index 995763b..8175eed 100644
--- a/SourceCode/Bond/Servo/CEFEM.cpp
+++ b/SourceCode/Bond/Servo/CEFEM.cpp
@@ -713,7 +713,7 @@
// JOB Data Request
CEqReadStep* pStep = new CEqReadStep(0x0, 0,
[&](void* pFrom, int code, const char* pszData, size_t size) -> int {
- if (code == ROK && pszData != nullptr && size > 0) {
+ if (code == ROK /* && pszData != nullptr && size > 0*/) {
// 由于EFEM没有发送参数到master, 我们只需要返回数据
// Cassette Sequence No和Job Sequence No根据上一次调试缓存而来
// decodeJobDataRequest((CStep*)pFrom, pszData, size);
@@ -805,14 +805,23 @@
}
// 更新信号到LoadPort, Robot, Aligner, Fliper
- m_pPort[0]->setLinkSignalBlock(0, &m_bLinkSignal[0][0]);
- m_pPort[1]->setLinkSignalBlock(0, &m_bLinkSignal[1][0]);
- m_pPort[2]->setLinkSignalBlock(0, &m_bLinkSignal[2][0]);
- m_pPort[3]->setLinkSignalBlock(0, &m_bLinkSignal[3][0]);
- m_pArmTray[0]->setLinkSignalBlock(0, &m_bLinkSignal[4][0]);
- m_pArmTray[1]->setLinkSignalBlock(0, &m_bLinkSignal[5][0]);
- m_pAligner->setLinkSignalBlock(0, &m_bLinkSignal[6][0]);
- m_pFliper->setLinkSignalBlock(0, &m_bLinkSignal[7][0]);
+ m_pPort[0]->setLinkSignalUpstreamBlock(0, &m_bLinkSignalToUpstream[0][0]);
+ m_pPort[1]->setLinkSignalUpstreamBlock(0, &m_bLinkSignalToUpstream[1][0]);
+ m_pPort[2]->setLinkSignalUpstreamBlock(0, &m_bLinkSignalToUpstream[2][0]);
+ m_pPort[3]->setLinkSignalUpstreamBlock(0, &m_bLinkSignalToUpstream[3][0]);
+ m_pArmTray[0]->setLinkSignalUpstreamBlock(0, &m_bLinkSignalToUpstream[4][0]);
+ m_pArmTray[1]->setLinkSignalUpstreamBlock(0, &m_bLinkSignalToUpstream[5][0]);
+ m_pAligner->setLinkSignalUpstreamBlock(0, &m_bLinkSignalToUpstream[6][0]);
+ m_pFliper->setLinkSignalUpstreamBlock(0, &m_bLinkSignalToUpstream[7][0]);
+
+ m_pPort[0]->setLinkSignalDownstreamBlock(0, &m_bLinkSignalToDownstream[0][0]);
+ m_pPort[1]->setLinkSignalDownstreamBlock(0, &m_bLinkSignalToDownstream[1][0]);
+ m_pPort[2]->setLinkSignalDownstreamBlock(0, &m_bLinkSignalToDownstream[2][0]);
+ m_pPort[3]->setLinkSignalDownstreamBlock(0, &m_bLinkSignalToDownstream[3][0]);
+ m_pArmTray[0]->setLinkSignalDownstreamBlock(0, &m_bLinkSignalToDownstream[4][0]);
+ m_pArmTray[1]->setLinkSignalDownstreamBlock(0, &m_bLinkSignalToDownstream[5][0]);
+ m_pAligner->setLinkSignalDownstreamBlock(0, &m_bLinkSignalToDownstream[6][0]);
+ m_pFliper->setLinkSignalDownstreamBlock(0, &m_bLinkSignalToDownstream[7][0]);
}
int CEFEM::onReceivedJob(int port, CJobDataS* pJobDataS)
@@ -843,66 +852,40 @@
int CEFEM::onFetchedOutJob(int port, CJobDataB* pJobDataB)
{
- if (port == 1) {
- return m_pPort[0]->onFetchedOutJob(port, pJobDataB);
- }
- if (port == 2) {
- return m_pPort[1]->onFetchedOutJob(port, pJobDataB);
- }
- if (port == 3) {
- return m_pPort[2]->onFetchedOutJob(port, pJobDataB);
- }
- if (port == 4) {
- return m_pPort[3]->onFetchedOutJob(port, pJobDataB);
- }
- if (port == 5) {
- return m_pArmTray[0]->onFetchedOutJob(port, pJobDataB);
- }
- if (port == 6) {
- return m_pArmTray[1]->onFetchedOutJob(port, pJobDataB);
- }
- if (port == 7) {
- return m_pAligner->onFetchedOutJob(port, pJobDataB);
- }
- if (port == 8) {
- return m_pFliper->onFetchedOutJob(port, pJobDataB);
+ // 转发到子单元设备
+ CEquipment* pEqs[] = { m_pPort[0], m_pPort[1], m_pPort[2], m_pPort[3], m_pArmTray[0], m_pArmTray[1],
+ m_pAligner, m_pFliper };
+ if (1 <= port && port <= 8) {
+ pEqs[port - 1]->onFetchedOutJob(port, pJobDataB);
}
- return -1;
+
+ return 0;
}
int CEFEM::onStoredJob(int port, CJobDataB* pJobDataB)
{
- if (port == 1) {
- return m_pPort[0]->onStoredJob(port, pJobDataB);
- }
- if (port == 2) {
- return m_pPort[1]->onStoredJob(port, pJobDataB);
- }
- if (port == 3) {
- return m_pPort[2]->onStoredJob(port, pJobDataB);
- }
- if (port == 4) {
- return m_pPort[3]->onStoredJob(port, pJobDataB);
- }
- if (port == 5) {
- return m_pArmTray[0]->onStoredJob(port, pJobDataB);
- }
- if (port == 6) {
- return m_pArmTray[1]->onStoredJob(port, pJobDataB);
- }
- if (port == 7) {
- return m_pAligner->onStoredJob(port, pJobDataB);
- }
- if (port == 8) {
- return m_pFliper->onStoredJob(port, pJobDataB);
+ // 转发到子单元设备
+ CEquipment* pEqs[] = { m_pPort[0], m_pPort[1], m_pPort[2], m_pPort[3], m_pArmTray[0], m_pArmTray[1],
+ m_pAligner, m_pFliper };
+ if (1 <= port && port <= 8) {
+ pEqs[port - 1]->onStoredJob(port, pJobDataB);
}
- return -1;
+
+ return 0;
}
int CEFEM::getIndexerOperationModeBaseValue()
{
return 10000;
}
+
+ void CEFEM::printDebugRobotState()
+ {
+ LOGI("<CEFEM>Robot status:%d, ARM1:%s, ARM2:%s",
+ m_robotData.status,
+ m_robotData.armState[1] ? _T("ON") : _T("OFF"),
+ m_robotData.armState[2] ? _T("ON") : _T("OFF"));
+ }
}
--
Gitblit v1.9.3