From e42e8364112e97d89eeaecd13f043dff42179949 Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期二, 27 五月 2025 17:19:02 +0800
Subject: [PATCH] 1.enum修改为enum class, 理顺CLoadPort各成员变量在调度中的判定作用；
---
SourceCode/Bond/Servo/CBonder.cpp | 205 +++++++++++++++++++++++++++++++++++++++++++-------
1 files changed, 174 insertions(+), 31 deletions(-)
diff --git a/SourceCode/Bond/Servo/CBonder.cpp b/SourceCode/Bond/Servo/CBonder.cpp
index 2596d31..f485a94 100644
--- a/SourceCode/Bond/Servo/CBonder.cpp
+++ b/SourceCode/Bond/Servo/CBonder.cpp
@@ -87,11 +87,15 @@
}
{
- // eq process
- CEqProcessStep* pStep = new CEqProcessStep();
+ CEqReadStep* pStep = new CEqReadStep((m_nIndex == 0 ? 0xab55 : 0xeb55), 538 * 2,
+ [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
+ if (code == ROK && pszData != nullptr && size > 0) {
+ decodeProcessDataReport((CStep*)pFrom, pszData, size);
+ }
+ return -1;
+ });
pStep->setName(STEP_PROCESS);
- pStep->setWriteSignalDev(m_nIndex == 0 ? 0x347 : 0x647);
- pStep->setProcessDev(m_nIndex == 0 ? 0xab55 : 0xeb55);
+ pStep->setWriteSignalDev((m_nIndex == 0 ? 0x347 : 0x647));
if (addStep(STEP_ID_PROCESS_DATA_REPORT, pStep) != 0) {
delete pStep;
}
@@ -113,7 +117,7 @@
CEqCimMessageCmdStep* pStep = new CEqCimMessageCmdStep();
pStep->setName(STEP_CIM_MESSAGE_CMD);
pStep->setWriteSignalDev(m_nIndex == 0 ? 0x361 : 0x661);
- pStep->setCimMessageDev(m_nIndex == 0 ? 0x963 : 0x12b3);
+ pStep->setCimMessageDev(m_nIndex == 0 ? 0x950 : 0x12a0);
if (addStep(STEP_ID_CIM_MSG_SET_CMD_REPLY, pStep) != 0) {
delete pStep;
}
@@ -132,6 +136,8 @@
{
// CIM Message Confirm
+ // 要将int32的值拆分为两个short, 分别为msg id和panel id
+ // 65538, 2为msg id, 1为panel id
CEqReadIntStep* pStep = new CEqReadIntStep(__INT32, m_nIndex == 0 ? 0x9d80 : 0xdd80);
pStep->setName(STEP_EQ_CIM_MESSAGE_CONFIRM);
pStep->setWriteSignalDev(m_nIndex == 0 ? 0x349 : 0x649);
@@ -185,7 +191,7 @@
{
// master recipe list report
CEqReadStep* pStep = new CEqReadStep(m_nIndex == 0 ? 0xa955 : 0xe955, 255 * 2,
- [&](int code, const char* pszData, size_t size) -> int {
+ [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
if (code == ROK && pszData != nullptr && size > 0) {
// 此处解释配方数据
short ret = decodeRecipeListReport(pszData, size);
@@ -216,7 +222,7 @@
{
// recipe parameter report
CEqReadStep* pStep = new CEqReadStep(m_nIndex == 0 ? 0xaa54 : 0xea54, 257 * 2,
- [&](int code, const char* pszData, size_t size) -> int {
+ [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
if (code == ROK && pszData != nullptr && size > 0) {
// 此处解释配方数据
short ret = decodeRecipeParameterReport(pszData, size);
@@ -233,40 +239,99 @@
}
}
+ // 使用CEqReadStep替换CEqJobEventStep
{
- CEqJobEventStep* pStep = new CEqJobEventStep();
- pStep->setName(STEP_EQ_RECEIVED_JOB_UPS1);
- pStep->setWriteSignalDev(m_nIndex == 0 ? 0x300 : 0x600);
- pStep->setJobDataDev(m_nIndex == 0 ? 0x8c90 : 0xcc90);
- if (addStep(STEP_ID_RECIVE_JOB_UPS1, pStep) != 0) {
- delete pStep;
+ // Received Job Report Upstream #1~9
+ char szBuffer[256];
+ for (int i = 0; i < 9; i++) {
+ CEqReadStep* pStep = new CEqReadStep((m_nIndex == 0 ? 0x8c90 : 0xcc90) + 320 * i, 320 * 2,
+ [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
+ if (code == ROK && pszData != nullptr && size > 0) {
+ int port = (int)(__int64)((CEqReadStep*)pFrom)->getProp("Port");
+ if (port > 0) {
+ decodeReceivedJobReport((CStep*)pFrom, port, pszData, size);
+ }
+ }
+ return -1;
+ });
+ sprintf_s(szBuffer, "%s%d", STEP_EQ_RECEIVED_JOB_UPSn, i + 1);
+ pStep->setName(szBuffer);
+ pStep->setProp("Port", (void*)(__int64)(i + 1));
+ pStep->setWriteSignalDev((m_nIndex == 0 ? 0x300 : 0x600) + i);
+ if (addStep(STEP_ID_RECIVE_JOB_UPS1 + i, pStep) != 0) {
+ delete pStep;
+ }
}
}
{
- CEqJobEventStep* pStep = new CEqJobEventStep();
- pStep->setName(STEP_EQ_RECEIVED_JOB_UPS2);
- pStep->setWriteSignalDev(m_nIndex == 0 ? 0x301 : 0x601);
- pStep->setJobDataDev(m_nIndex == 0 ? 0x8dd0 : 0xcdd0);
- if (addStep(STEP_ID_RECIVE_JOB_UPS2, pStep) != 0) {
- delete pStep;
+ // Sent Out Job Report Downstream #1~9
+ char szBuffer[256];
+ for (int i = 0; i < 9; i++) {
+ CEqReadStep* pStep = new CEqReadStep((m_nIndex == 0 ? 0x8000 : 0xc000) + 320 * i, 320 * 2,
+ [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
+ if (code == ROK && pszData != nullptr && size > 0) {
+ int port = (int)(__int64)((CEqReadStep*)pFrom)->getProp("Port");
+ if (port > 0) {
+ decodeReceivedJobReport((CStep*)pFrom, port, pszData, size);
+ }
+ }
+ return -1;
+ });
+ sprintf_s(szBuffer, "%s%d", STEP_EQ_SENT_OUT_JOB_DOWNSn, i + 1);
+ pStep->setName(szBuffer);
+ pStep->setProp("Port", (void*)(__int64)(i + 1));
+ pStep->setWriteSignalDev((m_nIndex == 0 ? 0x30a : 0x60a) + i);
+ if (addStep(STEP_ID_SENT_OUT_JOB_DOWNS1 + i, pStep) != 0) {
+ delete pStep;
+ }
}
}
+
{
- CEqJobEventStep* pStep = new CEqJobEventStep();
- pStep->setName(STEP_EQ_SENT_OUT_JOB_DOWNS1);
- pStep->setWriteSignalDev(m_nIndex == 0 ? 0x30a : 0x60a);
- pStep->setJobDataDev(m_nIndex == 0 ? 0x8000 : 0xc000);
- if (addStep(STEP_ID_SENT_OUT_JOB_DOWNS1, pStep) != 0) {
- delete pStep;
+ // Fetched Out Job Report #1~15
+ char szBuffer[256];
+ for (int i = 0; i < 15; i++) {
+ CEqReadStep* pStep = new CEqReadStep((m_nIndex == 0 ? 0x9c31 : 0xdc31) + 18 * i, 18 * 2,
+ [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
+ if (code == ROK && pszData != nullptr && size > 0) {
+ int port = (int)(__int64)((CEqReadStep*)pFrom)->getProp("Port");
+ if (port > 0) {
+ decodeFetchedOutJobReport((CStep*)pFrom, port, pszData, size);
+ }
+ }
+ return -1;
+ });
+ sprintf_s(szBuffer, "%s%d", STEP_EQ_FETCHED_OUT_JOBn, i + 1);
+ pStep->setName(szBuffer);
+ pStep->setProp("Port", (void*)(__int64)(i + 1));
+ pStep->setWriteSignalDev((m_nIndex == 0 ? 0x323 : 0x623) + i);
+ if (addStep(STEP_ID_FETCHED_OUT_JOB_REPORT1 + i, pStep) != 0) {
+ delete pStep;
+ }
}
}
+
{
- CEqJobEventStep* pStep = new CEqJobEventStep();
- pStep->setName(STEP_EQ_SENT_OUT_JOB_DOWNS2);
- pStep->setWriteSignalDev(m_nIndex == 0 ? 0x30b : 0x60b);
- pStep->setJobDataDev(m_nIndex == 0 ? 0x8140 : 0xc140);
- if (addStep(STEP_ID_SENT_OUT_JOB_DOWNS2, pStep) != 0) {
- delete pStep;
+ // Stored Job Report #1~15
+ char szBuffer[256];
+ for (int i = 0; i < 15; i++) {
+ CEqReadStep* pStep = new CEqReadStep((m_nIndex == 0 ? 0x9b23 : 0xdb23) + 18 * i, 18 * 2,
+ [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
+ if (code == ROK && pszData != nullptr && size > 0) {
+ int port = (int)(__int64)((CEqReadStep*)pFrom)->getProp("Port");
+ if (port > 0) {
+ decodeStoredJobReport((CStep*)pFrom, port, pszData, size);
+ }
+ }
+ return -1;
+ });
+ sprintf_s(szBuffer, "%s%d", STEP_EQ_STORED_JOBn, i + 1);
+ pStep->setName(szBuffer);
+ pStep->setProp("Port", (void*)(__int64)(i + 1));
+ pStep->setWriteSignalDev((m_nIndex == 0 ? 0x314 : 0x614) + i);
+ if (addStep(STEP_ID_STORE_JOB_REPORT1 + i, pStep) != 0) {
+ delete pStep;
+ }
}
}
}
@@ -310,4 +375,82 @@
{
return m_nIndex;
}
+
+ BOOL CBonder::onPreStoredJob(int port, CJobDataB* pJobDataB)
+ {
+ CJobDataS* pJobDataS = getJobDataS(pJobDataB->getCassetteSequenceNo(), pJobDataB->getJobSequenceNo());
+ if (pJobDataS == nullptr) {
+ LOGE("<CBonder-%s>onPreFetchedOutJob,找不到对应的JobDataS(CassetteSequenceNo:%d, JobSequenceNo:%d), 注意排查风险!", m_strName.c_str(),
+ pJobDataB->getCassetteSequenceNo(), pJobDataB->getJobSequenceNo());
+ return FALSE;
+ }
+
+ // 如果为空，可以进G1或G2
+ // 如果有一片玻璃，当前玻璃为G1则可进G2, 当前玻璃为G2则可进G1
+ BOOL bCheck = FALSE;
+ Lock();
+ size_t size = m_glassList.size();
+ if (size == 0) {
+ bCheck = TRUE;
+ }
+ else if (size == 1) {
+ CGlass* pGlass = m_glassList.front();
+ if ((pGlass->getType() == MaterialsType::G1 && pJobDataS->getMaterialsType() == (int)MaterialsType::G2)
+ || (pGlass->getType() == MaterialsType::G2 && pJobDataS->getMaterialsType() == (int)MaterialsType::G1)) {
+ bCheck = TRUE;
+ }
+ }
+ Unlock();
+
+ if (!bCheck) {
+ LOGE("<CEquipment-%s>onPreFetchedOutJob,当前机器不满足进料条件，或已存在两片玻璃，或G2与G1不匹配，请注意风险！", m_strName.c_str());
+ }
+
+ return bCheck;
+ }
+
+ int CBonder::onProcessData(CProcessData* pProcessData)
+ {
+ CEquipment::onProcessData(pProcessData);
+
+
+ // 检查数据，当前两片玻璃，一片为G1, 一片为G2, 且pProcessData中的id能匹配G1或G2
+ Lock();
+ if (m_glassList.size() != 2) {
+ Unlock();
+ LOGE("<CBonder-%s>onProcessData,绑定失败，腔体内必须有且仅有两片玻璃!", m_strName.c_str());
+ return -1;
+ }
+
+ CGlass* pGlass1 = m_glassList.front();
+ CGlass* pGlass2 = m_glassList.back();
+ Unlock();
+
+ if (pGlass1->getBuddy() != nullptr || pGlass2->getBuddy() != nullptr) {
+ LOGE("<CBonder-%s>onProcessData,错误!玻璃较早前已被绑定，请检查数据是否正确!", m_strName.c_str());
+ return -1;
+ }
+
+ if (pGlass1->getBuddy() != nullptr || pGlass2->getBuddy() != nullptr) {
+ LOGE("<CBonder-%s>onProcessData,错误!玻璃较早前已被贴合，请检查数据是否正确!", m_strName.c_str());
+ return -1;
+ }
+
+ if (pGlass1->getType() == pGlass2->getType()) {
+ LOGE("<CBonder-%s>onProcessData,错误!两片玻璃未匹配，必须分别为G1和G2类型，请检查数据是否正确!", m_strName.c_str());
+ return -1;
+ }
+
+ pGlass1->setBuddy(pGlass2);
+ pGlass2->setBuddy(pGlass1);
+ LOGE("<CBonder-%s>onProcessData,%s和%s已贴合!", m_strName.c_str(),
+ pGlass1->getID().c_str(), pGlass2->getID().c_str());
+
+ return 0;
+ }
+
+ int CBonder::getIndexerOperationModeBaseValue()
+ {
+ return m_nIndex == 0 ? 15000 : 20000;
+ }
}
--
Gitblit v1.9.3