From bc7f1c4e028e69be51079b59dae4ae5c4d43f5bb Mon Sep 17 00:00:00 2001
From: chenluhua1980 <Chenluhua@qq.com>
Date: 星期六, 31 一月 2026 21:54:56 +0800
Subject: [PATCH] 1.状态指示图，目前灰色表示掉线，绿色表示在线。增加Slot的小点表示有没有料，及加工状态 。 2.增加图示
---
SourceCode/Bond/Servo/CBakeCooling.cpp | 50 ++++++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 48 insertions(+), 2 deletions(-)
diff --git a/SourceCode/Bond/Servo/CBakeCooling.cpp b/SourceCode/Bond/Servo/CBakeCooling.cpp
index dedf8a4..bbacd24 100644
--- a/SourceCode/Bond/Servo/CBakeCooling.cpp
+++ b/SourceCode/Bond/Servo/CBakeCooling.cpp
@@ -32,7 +32,7 @@
void CBakeCooling::initPins()
{
// 加入Pin初始化代码
- LOGI("<CBakeCooling>initPins");
+ LOGD("<CBakeCooling>initPins");
addPin(SERVO::PinType::INPUT, _T("In1"));
addPin(SERVO::PinType::INPUT, _T("In2"));
addPin(SERVO::PinType::OUTPUT, _T("Out"));
@@ -487,7 +487,53 @@
int CBakeCooling::parsingProcessData(const char* pszData, size_t size, std::vector<CParam>& params)
{
- return parsingParams(pszData, size, params);
+ ASSERT(pszData);
+ if (size < 250) return 0;
+ int i = 0, v;
+
+
+ // 1.工艺参数序号
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("工艺参数序号", "", this->getName().c_str(), v));
+ i += 2;
+
+ if (v == 1) {
+ // 2.A_腔烘烤时间
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("A_腔烘烤时间", "", this->getName().c_str(), v * 0.01f));
+ i += 2;
+
+ // 3.A_烘烤温度设定
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("A_烘烤温度设定", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+ }
+ else if (v == 2) {
+ // 2.A_腔冷却时间
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("A_腔冷却时间", "", this->getName().c_str(), v * 0.01f));
+ i += 2;
+ }
+ else if (v == 3) {
+ // 2.A_腔烘烤时间
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("B_腔烘烤时间", "", this->getName().c_str(), v * 0.01f));
+ i += 2;
+
+ // 3.A_烘烤温度设定
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("B_烘烤温度设定", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+ }
+ else if (v == 4) {
+ // 2.A_腔冷却时间
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("B_腔冷却时间", "", this->getName().c_str(), v * 0.01f));
+ i += 2;
+ }
+
+
+ return (int)params.size();
}
int CBakeCooling::parsingSVData(const char* pszData, size_t size, std::vector<CParam>& params)
--
Gitblit v1.9.3