From bfe14e41fa5b07771d78af4511ba18d706bc23cc Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期一, 28 七月 2025 17:07:52 +0800
Subject: [PATCH] 1.Spooling Config功能EAP模拟测试；
---
SourceCode/Bond/Servo/CFliper.cpp | 51 +++++++++++++--------------------------------------
1 files changed, 13 insertions(+), 38 deletions(-)
diff --git a/SourceCode/Bond/Servo/CFliper.cpp b/SourceCode/Bond/Servo/CFliper.cpp
index 891aac4..aed1fc6 100644
--- a/SourceCode/Bond/Servo/CFliper.cpp
+++ b/SourceCode/Bond/Servo/CFliper.cpp
@@ -33,9 +33,19 @@
{
// 加入Pin初始化代码
LOGI("<CFliper>initPins");
- addPin(SERVO::PinType::INPUT, _T("In1"));
- addPin(SERVO::PinType::INPUT, _T("In2"));
- addPin(SERVO::PinType::OUTPUT, _T("Out"));
+ addPin(SERVO::PinType::INPUT, _T("In"));
+ addPin(SERVO::PinType::OUTPUT, _T("Out1"));
+ addPin(SERVO::PinType::OUTPUT, _T("Out2"));
+ }
+
+ // 必须要实现的虚函数，在此初始化Slot信息
+ void CFliper::initSlots()
+ {
+ m_slot[0].enable();
+ m_slot[0].setPosition(m_nID);
+ m_slot[0].setNo(1);
+ m_slot[0].setName("Slot 1(G2)");
+ m_slot[0].setType(MaterialsType::G2);
}
void CFliper::onTimer(UINT nTimerid)
@@ -56,40 +66,5 @@
int CFliper::recvIntent(CPin* pPin, CIntent* pIntent)
{
return __super::recvIntent(pPin, pIntent);
- }
-
- BOOL CFliper::glassWillArrive(CGlass* pGlass)
- {
- BOOL bRet = __super::glassWillArrive(pGlass);
- if (!bRet) {
- return FALSE;
- }
-
- return m_glassList.empty();
- }
-
- BOOL CFliper::onPreStoredJob(int port, CJobDataB* pJobDataB)
- {
- CJobDataS* pJobDataS = getJobDataS(pJobDataB->getCassetteSequenceNo(), pJobDataB->getJobSequenceNo());
- if (pJobDataS == nullptr) {
- LOGE("<CFliper-%s>onPreFetchedOutJob,找不到对应的JobDataS(CassetteSequenceNo:%d, JobSequenceNo:%d), 注意排查风险!", m_strName.c_str(),
- pJobDataB->getCassetteSequenceNo(), pJobDataB->getJobSequenceNo());
- return FALSE;
- }
-
- // 当前不能有任何玻璃，且当前准备进的片是G2
- Lock();
- if (!m_glassList.empty()) {
- Unlock();
- LOGE("<CFliper-%s>onPreFetchedOutJob,当前机器或单元存在玻璃片，不能进料，请注意风险！", m_strName.c_str());
- return FALSE;
- }
-
- if (pJobDataS->getMaterialsType() != (int)MaterialsType::G2) {
- LOGE("<CFliper-%s>onPreFetchedOutJob,当前机器或单元只能进G2玻璃片，请注意风险！", m_strName.c_str());
- return FALSE;
- }
-
- return TRUE;
}
}
--
Gitblit v1.9.3