From bfe14e41fa5b07771d78af4511ba18d706bc23cc Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期一, 28 七月 2025 17:07:52 +0800
Subject: [PATCH] 1.Spooling Config功能EAP模拟测试；
---
SourceCode/Bond/Servo/CEquipment.cpp | 176 +++++++++++++++++++++++++++++++++++++++-------------------
1 files changed, 118 insertions(+), 58 deletions(-)
diff --git a/SourceCode/Bond/Servo/CEquipment.cpp b/SourceCode/Bond/Servo/CEquipment.cpp
index e565feb..c670d76 100644
--- a/SourceCode/Bond/Servo/CEquipment.cpp
+++ b/SourceCode/Bond/Servo/CEquipment.cpp
@@ -7,22 +7,6 @@
#include "Servo.h"
-#define CHECK_READ_STEP_SIGNAL(addr, data, size) { \
- BOOL bFlag = isBitOn(data, size, addr); \
- SERVO::CStep* pStep = getStep(addr); \
- if (pStep != nullptr) { \
- ((CReadStep*)pStep)->onReadSignal(bFlag ? addr : 0); \
- } \
-}
-
-#define CHECK_WRITE_STEP_SIGNAL(addr, data, size) { \
- BOOL bFlag = isBitOn(data, size, addr); \
- SERVO::CStep* pStep = getStep(addr); \
- if (pStep != nullptr) { \
- ((CWriteStep*)pStep)->onRecvSignal(bFlag ? addr : 0); \
- } \
-}
-
namespace SERVO {
CEquipment::CEquipment() : m_nID(0), m_strName(""), m_strDescription(""), m_station(0, 255)
@@ -406,10 +390,12 @@
m_bLinkSignalToUpstream[i][SIGNAL_INTERLOCK] = isBitOn(pszData, size, index + 2);
m_bLinkSignalToUpstream[i][SIGNAL_SEND_ABLE] = isBitOn(pszData, size, index + 3);
index += 0x40;
+
+ if (m_bLinkSignalToUpstream[i][SIGNAL_SEND_ABLE]) {
+ onSendAble(i+1);
+ }
}
- if(m_bLinkSignalToUpstream[0][SIGNAL_SEND_ABLE]) {
- onSendAble();
- }
+
index += 0x40 * 2;
for (int i = 0; i < 8; i++) {
@@ -418,10 +404,12 @@
m_bLinkSignalToDownstream[i][SIGNAL_INTERLOCK] = isBitOn(pszData, size, index + 2);
m_bLinkSignalToDownstream[i][SIGNAL_RECEIVE_ABLE] = isBitOn(pszData, size, index + 3);
index += 0x40;
+
+ if (m_bLinkSignalToDownstream[0][SIGNAL_RECEIVE_ABLE]) {
+ onReceiveAble(i + 1);
+ }
}
- if (m_bLinkSignalToDownstream[0][SIGNAL_RECEIVE_ABLE]) {
- onReceiveAble();
- }
+
// 其它信号及响应
index = 0x540;
@@ -597,7 +585,7 @@
CHECK_WRITE_STEP_SIGNAL(STEP_ID_IN_OP_CMD_REPLY, pszData, size);
// Panel Data Report
- CHECK_WRITE_STEP_SIGNAL(STEP_ID_PANEL_DATA_REPORT, pszData, size);
+ CHECK_READ_STEP_SIGNAL(STEP_ID_PANEL_DATA_REPORT, pszData, size);
// Panel Data Request
CHECK_WRITE_STEP_SIGNAL(STEP_ID_PANEL_DATA_REQUEST, pszData, size);
@@ -608,6 +596,11 @@
// job process start/end report
CHECK_READ_STEP_SIGNAL(STEP_ID_JOB_PROCESS_START_REPORT, pszData, size);
CHECK_READ_STEP_SIGNAL(STEP_ID_JOB_PROCESS_END_REPORT, pszData, size);
+
+ CHECK_WRITE_STEP_SIGNAL(STEP_ID_PROT1_CASSETTE_CTR_CMD_REPLY, pszData, size);
+ CHECK_WRITE_STEP_SIGNAL(STEP_ID_PROT2_CASSETTE_CTR_CMD_REPLY, pszData, size);
+ CHECK_WRITE_STEP_SIGNAL(STEP_ID_PROT3_CASSETTE_CTR_CMD_REPLY, pszData, size);
+ CHECK_WRITE_STEP_SIGNAL(STEP_ID_PROT4_CASSETTE_CTR_CMD_REPLY, pszData, size);
}
BOOL CEquipment::isBitOn(const char* pszData, size_t size, int index)
@@ -836,7 +829,7 @@
return 0;
}
- int CEquipment::fetchedOutJob(CJobDataB* pJobDataB)
+ int CEquipment::fetchedOutJob(int port, CJobDataB* pJobDataB)
{
if (m_pArm == nullptr) {
return -1;
@@ -859,7 +852,6 @@
return -3;
}
-
((CArm*)m_pArm)->tempStore(pContext);
pContext->release();
Unlock();
@@ -876,7 +868,7 @@
return 0;
}
- int CEquipment::storedJob(CJobDataB* pJobDataB, short putSlot)
+ int CEquipment::storedJob(int port, CJobDataB* pJobDataB, short putSlot)
{
if (m_pArm == nullptr) {
return -1;
@@ -902,7 +894,7 @@
if (m_listener.onDataChanged != nullptr) {
m_listener.onDataChanged(this, EDCC_STORED_JOB);
}
-
+
return 0;
}
@@ -950,7 +942,6 @@
CGlass* CEquipment::getGlassWithCassette(int cassetteSequenceNo, int jobSequenceNo)
{
- CSlot* pSlot = nullptr;
for (int i = 0; i < SLOT_MAX; i++) {
if (!m_slot[i].isEnable()) continue;
CGlass* pGlass = (CGlass*)m_slot[i].getContext();
@@ -1304,7 +1295,9 @@
if (!m_slot[i].isEnable()) continue;
if (m_slot[i].isLock()) continue;
CGlass* pGlass = (CGlass*)m_slot[i].getContext();
+ if (!isSlotProcessed(i)) continue;
if (pGlass == nullptr) continue;
+ if(pGlass->getInspResult(m_nID, 0) == InspResult::Fail) continue;
int lsPath = m_slot[i].getLinkSignalPath();
if(!m_bLinkSignalToUpstream[lsPath][SIGNAL_UPSTREAM_INLINE]
|| m_bLinkSignalToUpstream[lsPath][SIGNAL_UPSTREAM_TROUBLE]
@@ -1330,6 +1323,7 @@
if (m_slot[i].isLock()) continue;
CGlass* pGlass = (CGlass*)m_slot[i].getContext();
if (pGlass == nullptr) continue;
+ if (!isSlotProcessed(i+1)) continue;
int lsPath = m_slot[i].getLinkSignalPath();
if (!m_bLinkSignalToUpstream[lsPath][SIGNAL_UPSTREAM_INLINE]
|| m_bLinkSignalToUpstream[lsPath][SIGNAL_UPSTREAM_TROUBLE]
@@ -1343,6 +1337,26 @@
return &m_slot[i];
}
}
+ }
+
+ return nullptr;
+ }
+
+ CSlot* CEquipment::getInspFailSlot()
+ {
+ for (int i = 0; i < SLOT_MAX; i++) {
+ if (!m_slot[i].isEnable()) continue;
+ if (m_slot[i].isLock()) continue;
+ CGlass* pGlass = (CGlass*)m_slot[i].getContext();
+ if (pGlass == nullptr) continue;
+ if (pGlass->getInspResult(m_nID, 0) != InspResult::Fail) continue;
+ int lsPath = m_slot[i].getLinkSignalPath();
+ if (!m_bLinkSignalToUpstream[lsPath][SIGNAL_UPSTREAM_INLINE]
+ || m_bLinkSignalToUpstream[lsPath][SIGNAL_UPSTREAM_TROUBLE]
+ || !m_bLinkSignalToUpstream[lsPath][SIGNAL_INTERLOCK]
+ || !m_bLinkSignalToUpstream[lsPath][SIGNAL_SEND_ABLE]) continue;
+
+ return &m_slot[i];
}
return nullptr;
@@ -1388,6 +1402,10 @@
if (pSlot == nullptr) return -1;
pSlot->setContext(nullptr);
+ if (m_listener.onDataChanged != nullptr) {
+ m_listener.onDataChanged(this, EDCC_FETCHOUT_JOB);
+ }
+
return 0;
}
@@ -1434,7 +1452,16 @@
int CEquipment::onReceivedJob(int port, CJobDataS* pJobDataS)
{
LOGI("<CEquipment-%s>onReceivedJob.", m_strName.c_str());
- return 0;
+
+
+ // 可以在此更新JobDataS数据了
+ int nRet = ((CArm*)m_pArm)->glassUpdateJobDataS(pJobDataS);
+ if (nRet < 0) {
+ LOGE("<CEquipment-%s>onReceivedJob,更新JobDataS失败，glassUpdateJobDataS返回%d",
+ m_strName.c_str(), nRet);
+ }
+
+ return nRet;
}
int CEquipment::decodeSentOutJobReport(CStep* pStep, int port, const char* pszData, size_t size)
@@ -1455,17 +1482,6 @@
int CEquipment::onSentOutJob(int port, CJobDataS* pJobDataS)
{
LOGI("<CEquipment-%s>onSentOutJob.", m_strName.c_str());
-
-
- // 可以在此更新JobDataS数据了
- CGlass* pGlass = getGlass(pJobDataS->getGlass1Id().c_str());
- if (pGlass == nullptr) {
- LOGE("<CEquipment-%s>onSentOutJob,没有找到对应的Glass(CassetteSequenceNo:%d, JobSequenceNo:%d, ID=%s)，请检查数据，注意风险。",
- m_strName.c_str(), pJobDataS->getCassetteSequenceNo(), pJobDataS->getJobSequenceNo(),
- pJobDataS->getGlass1Id().c_str());
- return -1;
- }
- pGlass->updateJobDataS(pJobDataS);
return 0;
}
@@ -1517,7 +1533,7 @@
LOGI("<CEquipment-%s>onPreFetchedOutJob:port:%d|GlassId:%s",
m_strName.c_str(), port, pJobDataB->getGlassId().c_str());
if (m_listener.onPreFethedOutJob != nullptr) {
- return m_listener.onPreFethedOutJob(this, pJobDataB);
+ return m_listener.onPreFethedOutJob(this, port, pJobDataB);
}
return TRUE;
@@ -1530,7 +1546,7 @@
BOOL bCheck = onPreFetchedOutJob(port, pJobDataB);
if (bCheck) {
- return fetchedOutJob(pJobDataB);
+ return fetchedOutJob(port, pJobDataB);
}
// 数据异常，处理或显示
@@ -1612,7 +1628,7 @@
index += sizeof(short);
CToolUnits::convertString(&pszData[index], 128 * 2, strPanelJudgeData);
index += 128 * 2;
- CToolUnits::convertString(&pszData[index], 256 * 2, strPanelJudgeData);
+ CToolUnits::convertString(&pszData[index], 256 * 2, strPanelGradeData);
index += 256 * 2;
@@ -1627,6 +1643,15 @@
pStep->addAttribute(new CAttribute("PanelGradeData",
strPanelGradeData.c_str(), "", weight++));
+
+ // 更新检测结果
+ CGlass* pGlass = getGlassWithCassette(cassetteNo, jobSequenceNo);
+ if (pGlass == nullptr) {
+ LOGE("<CEquipment-%s>更新Panel Data失败，找不到对应的Glass.cassetteNo=%d, jobSequenceNo=%d",
+ getName().c_str(), cassetteNo, jobSequenceNo);
+ return -1;
+ }
+ pGlass->setInspResult(m_nID, 0, judgeStringToInspResult(strPanelJudgeData));
return 0;
}
@@ -1678,7 +1703,9 @@
int CEquipment::decodeJobProcessStartReport(CStep* pStep, const char* pszData, size_t size)
{
- LOGI("<CEquipment-%s>decodeJobProcessStartReport", getName().c_str());
+ int port = (int)(__int64)pStep->getProp("Port");
+ LOGI("<CEquipment-%s>decodeJobProcessStartReport, port:%d", getName().c_str(), port);
+
short cassetteNo, jobSequenceNo, unitNo, subUnitNo, slotNo;
int year, month, day, hour, minute, second;
@@ -1744,7 +1771,8 @@
int CEquipment::decodeJobProcessEndReport(CStep* pStep, const char* pszData, size_t size)
{
- LOGI("<CEquipment-%s>decodeJobProcessEndReport", getName().c_str());
+ int port = (int)(__int64)pStep->getProp("Port");
+ LOGI("<CEquipment-%s>decodeJobProcessEndReport, port:%d", getName().c_str(), port);
short cassetteNo, jobSequenceNo, unitNo, subUnitNo, slotNo;
int year, month, day, hour, minute, second;
@@ -1789,6 +1817,28 @@
if (m_processState != PROCESS_STATE::Complete) {
setProcessState(PROCESS_STATE::Complete);
}
+
+ CGlass* pGlass = getGlassFromSlot(slotNo);
+ if (pGlass == nullptr) {
+ LOGE("<CEquipment-%s>decodeJobProcessEndReport, 找不到对应glass", getName().c_str());
+ }
+ else {
+ CJobDataS* pJs = pGlass->getJobDataS();
+ if (pJs->getCassetteSequenceNo() == cassetteNo
+ && pJs->getJobSequenceNo() == jobSequenceNo) {
+ pGlass->processEnd(m_nID, getSlotUnit(slotNo));
+ if (m_processState != PROCESS_STATE::Complete) {
+ setProcessState(PROCESS_STATE::Complete);
+ }
+ }
+ else {
+ LOGE("<CEquipment-%s>decodeJobProcessEndReport, jobSequenceNo或jobSequenceNo不匹配",
+ getName().c_str());
+ }
+ }
+
+
+
// 缓存Attribute，用于调试时显示信息
unsigned int weight = 201;
@@ -1833,17 +1883,18 @@
// 如果没有可用位置，报错
Lock();
- CSlot* pSlot = getAvailableSlotForGlassExcludeSignal((MaterialsType)pJobDataS->getMaterialsType());
- if (pSlot == nullptr) {
+ CSlot* pSlot = getSlot(putSlot - 1);
+ ASSERT(pSlot);
+ if (pSlot->getContext() != nullptr) {
Unlock();
- LOGE("<CEquipemnt-%s>onPreFetchedOutJob,找不到匹配的Slot，不能进料，请注意风险！", m_strName.c_str());
+ LOGE("<CEquipemnt-%s>onPreStoredJob,指定slot(port:%d)有料，请注意风险！", m_strName.c_str(), port);
return FALSE;
}
Unlock();
if (m_listener.onPreStoredJob != nullptr) {
- if (!m_listener.onPreStoredJob(this, pJobDataB, putSlot)) {
+ if (!m_listener.onPreStoredJob(this, port, pJobDataB, putSlot)) {
return FALSE;
}
@@ -1863,11 +1914,11 @@
short putSlot = 0;
BOOL bCheck = onPreStoredJob(port, pJobDataB, putSlot);
if (bCheck) {
- return storedJob(pJobDataB, putSlot);
+ return storedJob(port, pJobDataB, putSlot);
}
// 数据异常，处理或显示
- LOGI("<CEquipment-%s>onStoredJob Error.ort:%d|GlassId:%s",
+ LOGI("<CEquipment-%s>onStoredJob Error.port:%d|GlassId:%s",
m_strName.c_str(), port, pJobDataB->getGlassId().c_str());
return -1;
}
@@ -1883,19 +1934,16 @@
* 当从CC-Link检测到设备Send Able为On时调用此函数
* 可能会多次重复调用(根据扫描频率), 注意防呆
*/
- int CEquipment::onSendAble()
+ int CEquipment::onSendAble(int port)
{
- LOGI("<CEquipment-%s>onSendAble.", m_strName.c_str());
- if (m_processState != PROCESS_STATE::Complete) {
- setProcessState(PROCESS_STATE::Complete);
- }
+ LOGI("<CEquipment-%s>onSendAble.port:%d", m_strName.c_str(), port);
return 0;
}
- int CEquipment::onReceiveAble()
+ int CEquipment::onReceiveAble(int port)
{
- LOGI("<CEquipment-%s>onReceiveAble.", m_strName.c_str());
+ LOGI("<CEquipment-%s>onReceiveAble.port:%d", m_strName.c_str(), port);
return 0;
}
@@ -1944,4 +1992,16 @@
);
}
}
+
+ InspResult CEquipment::judgeStringToInspResult(std::string& strJudge)
+ {
+ if (strJudge.compare("N") == 0) {
+ return InspResult::Fail;
+ }
+ if (strJudge.compare("G") == 0) {
+ return InspResult::Pass;
+ }
+
+ return InspResult::NotInspected;
+ }
}
\ No newline at end of file
--
Gitblit v1.9.3