From 9e9e63ef44ff672989d7b78bf37afb2054267671 Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期一, 22 九月 2025 15:47:04 +0800
Subject: [PATCH] 1.完善工艺批次逻辑； 2.PortType保存到本地，不再同步到efem
---
SourceCode/Bond/Servo/CMaster.cpp | 1920 +++++++++++++++++++++++++++++++++++++++++++++++++++++------
1 files changed, 1,712 insertions(+), 208 deletions(-)
diff --git a/SourceCode/Bond/Servo/CMaster.cpp b/SourceCode/Bond/Servo/CMaster.cpp
index 602cdf2..960294c 100644
--- a/SourceCode/Bond/Servo/CMaster.cpp
+++ b/SourceCode/Bond/Servo/CMaster.cpp
@@ -3,6 +3,9 @@
#include "CMaster.h"
#include <future>
#include <vector>
+#include "RecipeManager.h"
+#include <fstream>
+#include "SerializeUtil.h"
namespace SERVO {
@@ -50,12 +53,34 @@
m_ullRunTime = 0;
m_state = MASTERSTATE::READY;
m_pActiveRobotTask = nullptr;
- m_nLastError = 0;
+ m_nLastError = ER_CODE_NOERROR;
+ m_isCompareMapsBeforeProceeding = FALSE;
+ m_bJobMode = FALSE;
+ m_bEnableEventReport = true;
+ m_bEnableAlarmReport = true;
+ m_bContinuousTransfer = false;
+ m_bBatch = false;
+ m_nContinuousTransferCount = 0;
+ m_nContinuousTransferStep = CTStep_Unknow;
+ m_nContinuousWorkingPort = 0;
+ m_nContinuousWorkingSlot = 0;
+ m_pControlJob = nullptr;
+ m_nTestFlag = 0;
InitializeCriticalSection(&m_criticalSection);
}
CMaster::~CMaster()
{
+ // 释放Job相关
+ for (auto item : m_processJobs) {
+ delete item;
+ }
+ m_processJobs.clear();
+ if (m_pControlJob != nullptr) {
+ delete m_pControlJob;
+ m_pControlJob = nullptr;
+ }
+
if (m_hEventReadBitsThreadExit[0] != nullptr) {
::CloseHandle(m_hEventReadBitsThreadExit[0]);
m_hEventReadBitsThreadExit[0] = nullptr;
@@ -108,7 +133,7 @@
BoardVersion version{};
int nRet = m_cclink.GetBoardVersion(version);
if (nRet == 0) {
- LOGI("版本信息：%s.", version.toString().c_str());
+ LOGD("版本信息：%s.", version.toString().c_str());
}
else {
LOGE("获取CC-Link版本信息失败.");
@@ -117,7 +142,7 @@
BoardStatus status;
nRet = m_cclink.GetBoardStatus(status);
if (nRet == 0) {
- LOGI("状态：%s.", status.toString().c_str());
+ LOGD("状态：%s.", status.toString().c_str());
}
else {
LOGE("获取CC-Link状态失败.");
@@ -188,10 +213,9 @@
-
-
// 读缓存数据
readCache();
+ loadState();
// 定时器
@@ -248,21 +272,68 @@
return -1;
}
+ m_bContinuousTransfer = false;
+ m_bBatch = false;
setState(MASTERSTATE::STARTING);
m_ullStartTime = GetTickCount64();
return 0;
}
- int CMaster::stop()
+ int CMaster::startContinuousTransfer()
{
- // 运行时间为累加结果，本次停止时刷新；
- if (m_state != MASTERSTATE::RUNNING) {
+ if (m_state != MASTERSTATE::READY) {
return -1;
}
+ m_bContinuousTransfer = true;
+ m_bBatch = false;
+ setState(MASTERSTATE::STARTING);
+ m_ullStartTime = GetTickCount64();
+
+ return 0;
+ }
+
+ int CMaster::startBatch()
+ {
+ if (m_state != MASTERSTATE::READY) {
+ return -1;
+ }
+
+ m_bContinuousTransfer = false;
+ m_bBatch = true;
+ setState(MASTERSTATE::STARTING);
+ m_ullStartTime = GetTickCount64();
+
+ return 0;
+ }
+
+ int CMaster::stop(int nErCode/* = ER_CODE_NOERROR*/)
+ {
+ // 运行时间为累加结果，本次停止时刷新；
+ lock();
+ if (m_state != MASTERSTATE::RUNNING && m_state != MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER
+ && m_state != MASTERSTATE::RUNNING_BATCH) {
+ unlock();
+ return -1;
+ }
m_ullRunTime += (GetTickCount64() - m_ullStartTime);
+ unlock();
+
+
+ // 更新状态
+ m_nLastError = nErCode;
setState(MASTERSTATE::STOPPING);
+
+
+ // ControlJob暂停
+ lock();
+ if (m_pControlJob != nullptr) {
+ m_pControlJob->pause();
+ saveState();
+ }
+ unlock();
+
return 0;
}
@@ -276,7 +347,8 @@
ULONGLONG CMaster::getRunTime()
{
- if (m_state == MASTERSTATE::RUNNING)
+ if (m_state == MASTERSTATE::RUNNING || m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER
+ || m_state == MASTERSTATE::RUNNING_BATCH)
return m_ullRunTime + (GetTickCount64() - m_ullStartTime);
else
return m_ullRunTime;
@@ -297,11 +369,12 @@
// 各种机器
+ CLoadPort* pLoadPorts[4];
CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
- CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
- CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
- CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
- CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
+ pLoadPorts[0] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
+ pLoadPorts[1] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
+ pLoadPorts[2] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
+ pLoadPorts[3] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
CVacuumBake* pVacuumBake = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
@@ -311,10 +384,10 @@
CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
ASSERT(pEFEM);
- ASSERT(pLoadPort1);
- ASSERT(pLoadPort2);
- ASSERT(pLoadPort3);
- ASSERT(pLoadPort4);
+ ASSERT(pLoadPorts[0]);
+ ASSERT(pLoadPorts[1]);
+ ASSERT(pLoadPorts[2]);
+ ASSERT(pLoadPorts[3]);
ASSERT(pFliper);
ASSERT(pVacuumBake);
ASSERT(pAligner);
@@ -326,7 +399,7 @@
while (1) {
// 待退出信号或时间到
HANDLE hEvents[] = { m_hEventDispatchThreadExit[0], m_hDispatchEvent };
- int nRet = WaitForMultipleObjects(2, hEvents, FALSE, 1000);
+ int nRet = WaitForMultipleObjects(2, hEvents, FALSE, 500);
if (nRet == WAIT_OBJECT_0) {
break;
}
@@ -351,7 +424,8 @@
TRACE("a0001\n", writeCode, retCode);
});
if (nRet != 0) {
- LOGI("<Master>EFEM切换Start状态失败");
+ LOGE("<Master>EFEM切换Start状态失败");
+ m_nLastError = ER_CODE_OPERATION_MODE_FAIL;
m_strLastError = "EFEM切换Start状态失败.";
goto WAIT;
}
@@ -364,7 +438,8 @@
TRACE("a0002\n");
});
if (nRet != 0) {
- LOGI("<Master>Bonder1切换Start状态失败");
+ LOGE("<Master>Bonder1切换Start状态失败");
+ m_nLastError = ER_CODE_BONDER_OPERATION_MODE_FAIL;
m_strLastError = "Bonder1切换Start状态失败.";
goto WAIT;
}
@@ -377,7 +452,8 @@
TRACE("a0003\n");
});
if (nRet != 0) {
- LOGI("<Master>Bonder2切换Start状态失败");
+ LOGE("<Master>Bonder2切换Start状态失败");
+ m_nLastError = ER_CODE_BONDER_OPERATION_MODE_FAIL;
m_strLastError = "Bonder2切换Start状态失败.";
goto WAIT;
}
@@ -390,7 +466,8 @@
TRACE("a0004\n");
});
if (nRet != 0) {
- LOGI("<Master>BakeCooling切换Start状态失败");
+ LOGE("<Master>BakeCooling切换Start状态失败");
+ m_nLastError = ER_CODE_OPERATION_MODE_FAIL;
m_strLastError = "BakeCooling切换Start状态失败.";
goto WAIT;
}
@@ -403,7 +480,8 @@
TRACE("a0005\n");
});
if (nRet != 0) {
- LOGI("<Master>VacuumBake切换Start状态失败");
+ LOGE("<Master>VacuumBake切换Start状态失败");
+ m_nLastError = ER_CODE_OPERATION_MODE_FAIL;
m_strLastError = "VacuumBake切换Start状态失败.";
goto WAIT;
}
@@ -416,7 +494,8 @@
TRACE("a0006\n");
});
if (nRet != 0) {
- LOGI("<Master>Measurement切换Start状态失败");
+ LOGE("<Master>Measurement切换Start状态失败");
+ m_nLastError = ER_CODE_OPERATION_MODE_FAIL;
m_strLastError = "Measurement切换Start状态失败.";
goto WAIT;
}
@@ -430,7 +509,7 @@
for (int i = 0; i < 6; i++) {
if (!bIomcOk[i]) {
bIomcOk[6] = FALSE;
- LOGI("<Master>%s切换Start状态失败", pEq[i]->getName().c_str());
+ LOGE("<Master>%s切换Start状态失败", pEq[i]->getName().c_str());
}
}
@@ -441,9 +520,14 @@
continue;
}
-
unlock();
- setState(MASTERSTATE::RUNNING);
+ if(m_bContinuousTransfer)
+ setState(MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER);
+ else if (m_bBatch)
+ setState(MASTERSTATE::RUNNING_BATCH);
+ else
+ setState(MASTERSTATE::RUNNING);
+
continue;
}
@@ -469,7 +553,8 @@
TRACE("s000%d: ret=%d\n", i + 1, retCode);
});
if (nRet != 0) {
- LOGI("<Master>%s切换Stop状态发送失败", pEq[i]->getName().c_str());
+ LOGE("<Master>%s切换Stop状态发送失败", pEq[i]->getName().c_str());
+ m_nLastError = ER_CODE_OPERATION_MODE_FAIL;
m_strLastError = pEq[i]->getName() + "切换Stop状态发送失败.";
bIomcOk[i] = FALSE;
promises[i].set_value(); // 避免 wait 阻塞
@@ -484,7 +569,7 @@
for (int i = 0; i < 6; ++i) {
if (!bIomcOk[i]) {
bIomcOk[6] = FALSE;
- LOGI("<Master>%s切换Stop状态失败", pEq[i]->getName().c_str());
+ LOGE("<Master>%s切换Stop状态失败", pEq[i]->getName().c_str());
}
}
@@ -494,7 +579,11 @@
}
LOGI("<Master>所有设备成功切换到 Stop 模式");
- setState(MASTERSTATE::READY);
+ if(m_nLastError == ER_CODE_NOERROR)
+ setState(MASTERSTATE::READY);
+ else
+ setState(MASTERSTATE::ATHERERROR);
+
continue;
}
@@ -519,42 +608,62 @@
}
- // 此处检测优先类型和次要类型（G1或G2）
- // 如果其中一Bonder有单个玻璃，优先取它的配对类型，否则无所谓了
- primaryType = MaterialsType::G1;
- secondaryType = MaterialsType::G2;
- if ((!pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
- && (!pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
- // 如果G1和G2都满了，那就看Aligner, 如果Aligner有玻璃为G1, 则取G2
- CGlass* pGlass = pAligner->getGlassFromSlot(1);
- if (pGlass != nullptr && pGlass->getType() == MaterialsType::G1) {
- primaryType = MaterialsType::G2;
- secondaryType = MaterialsType::G1;
- }
+ // Bonder1、Bonder2、Fliper、VacuumBake、Aligner，统计G2和G1的数量, 配对组数, 多出的类型
+ int nG2Count = 0, nG1Count = 0, nGlassGroup, nExtraType;
+ if (pBonder1->slotHasGlass(0)) {
+ nG2Count++;
}
- else if ((pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
- || (pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
- primaryType = MaterialsType::G2;
- secondaryType = MaterialsType::G1;
+ if (pBonder1->slotHasGlass(1)) {
+ nG1Count++;
}
+
+ if (pBonder2->slotHasGlass(0)) {
+ nG2Count++;
+ }
+ if (pBonder2->slotHasGlass(1)) {
+ nG1Count++;
+ }
+
+ if (pFliper->slotHasGlass(0)) {
+ nG2Count++;
+ }
+
+ if (pVacuumBake->slotHasGlass(0)) {
+ nG1Count++;
+ }
+ if (pVacuumBake->slotHasGlass(1)) {
+ nG1Count++;
+ }
+
+ CGlass* pTempGlass = pAligner->getGlassFromSlot(0);
+ if (pTempGlass != nullptr) {
+ MaterialsType type = pTempGlass->getType();
+ if(type == MaterialsType::G1)
+ nG1Count++;
+ else if (type == MaterialsType::G2)
+ nG2Count++;
+ }
+ nGlassGroup = min(nG1Count, nG2Count);
+
+ if (nG1Count == nG2Count) {
+ nExtraType = 0;
+ }
+ else if (nG1Count > nG2Count) {
+ nExtraType = 1;
+ }
+ else {
+ nExtraType = 2;
+ }
+ secondaryType = MaterialsType::G0;
// Measurement -> LoadPort
- if (rmd.armState[0] || rmd.armState[1]) {
- LOGI("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"),
- rmd.armState[1] ? _T("不可用") : _T("可用"));
- }
- CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
- CEquipment* pEqTar[] = { pVacuumBake, pFliper };
- if (primaryType == MaterialsType::G2) {
- pEqTar[0] = pFliper;
- pEqTar[1] = pVacuumBake;
- }
for (int s = 0; s < 4; s++) {
- if (!rmd.armState[0] && pEqLoadPort[s]->isEnable()
- && pEqLoadPort[s]->getPortType() == PortType::Unloading
- && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
- m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType);
+ PortType pt = pLoadPorts[s]->getPortType();
+ if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
+ && (pt == PortType::Unloading || pt == PortType::Both)
+ && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
+ m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], MaterialsType::G1, secondaryType);
if (m_pActiveRobotTask != nullptr) {
goto PORT_PUT;
}
@@ -562,178 +671,124 @@
}
PORT_PUT:
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+
+
+ // Measurement NG -> LoadPort
+ // NG回原位
+ if (!rmd.armState[1]) {
+ m_pActiveRobotTask = createTransferTask_restore(pMeasurement, pLoadPorts);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
}
// BakeCooling ->Measurement
if (!rmd.armState[0]) {
m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
}
-
// BakeCooling内部
// Bake -> Cooling
if (!rmd.armState[0]) {
m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
}
// Bonder -> BakeCooling
if (!rmd.armState[0]) {
m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
}
if (!rmd.armState[0]) {
m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
}
// Fliper(G2) -> Bonder
+ //m_nTestFlag = 1;
+ //pVacuumBake->m_nTestFlag = 1;
+ auto pSrcSlot = pVacuumBake->getProcessedSlot(MaterialsType::G1);
+ //LOGI("<Master>pSrcSlot = %x", pSrcSlot,);
+ if (pSrcSlot != nullptr && !rmd.armState[1]
+ && pBonder1->canPlaceGlassInSlot(0)) {
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, MaterialsType::G2, MaterialsType::G0, 2);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+ if (pSrcSlot != nullptr && !rmd.armState[1]
+ && pBonder2->canPlaceGlassInSlot(0)) {
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, MaterialsType::G2, MaterialsType::G0, 2);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+ //m_nTestFlag = 0
+ ;
// VacuumBake(G1) -> Bonder
- if (!rmd.armState[1] && !pBonder1->hasBondClass()) {
- m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
+ if (!rmd.armState[0] && pBonder1->slotHasGlass(0) && !pBonder1->slotHasGlass(1)) {
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, MaterialsType::G1, MaterialsType::G0);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
}
- if (!rmd.armState[1] && !pBonder2->hasBondClass()) {
- m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
- }
-
- if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
- m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
- }
-
- if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
- m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
+ if (!rmd.armState[0] && pBonder2->slotHasGlass(0) && !pBonder2->slotHasGlass(1)) {
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, MaterialsType::G1, MaterialsType::G0);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
}
// Aligner -> Fliper(G2)
// Aligner -> VacuumBake(G1)
if (!rmd.armState[1]) {
- m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
+ m_pActiveRobotTask = createTransferTask(pAligner, pFliper, MaterialsType::G2, secondaryType);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
}
if (!rmd.armState[0]) {
- m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
+ // m_nTestFlag = 1;
+ if (m_nTestFlag == 1) LOGD("createTransferTask 004df %d, %d", MaterialsType::G1, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, MaterialsType::G1, secondaryType);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ m_nTestFlag = 0;
}
+
+ // Aligner -> LoadPort
+ if (!rmd.armState[1]) {
+ m_pActiveRobotTask = createTransferTask_restore(pAligner, pLoadPorts);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+
// LoadPort -> Aligner
+ if (nGlassGroup >= 2) {
+ unlock();
+ continue;
+ }
+
+ if(nExtraType == 0)
+ primaryType = MaterialsType::G2;
+ else {
+ primaryType = MaterialsType::G1;
+ }
+
for (int s = 0; s < 4; s++) {
- if (!rmd.armState[0] && pEqLoadPort[s]->isEnable()
- && pEqLoadPort[s]->getPortType() == PortType::Loading
- && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
- m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pAligner, primaryType, secondaryType);
+ PortType pt = pLoadPorts[s]->getPortType();
+ if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
+ && (pt == PortType::Loading || pt == PortType::Both)
+ && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
+ m_pActiveRobotTask = createTransferTask(pLoadPorts[s], pAligner, primaryType, secondaryType, 1, m_bJobMode);
if (m_pActiveRobotTask != nullptr) {
+ CGlass* pGlass = (CGlass*)m_pActiveRobotTask->getContext();
+ if (pGlass->getBuddy() != nullptr) {
+ delete m_pActiveRobotTask;
+ m_pActiveRobotTask = nullptr;
+ continue;
+ }
+
+ pGlass->queue();
+ pGlass->start();
pEFEM->setContext(m_pActiveRobotTask->getContext());
goto PORT_GET;
}
@@ -741,20 +796,428 @@
}
PORT_GET:
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->pick();
- std::string strDescription = m_pActiveRobotTask->getDescription();
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+
+
+ unlock();
+ continue;
+ }
+
+ // 批处理模式，最终以此为准，但先保留之前的单片模式
+ else if (m_state == MASTERSTATE::RUNNING_BATCH) {
+ // 1) 控制作业生命周期保障
+ if (m_pControlJob == nullptr) { unlock(); continue; }
+ CJState cjst = m_pControlJob->state();
+ if (cjst == CJState::Completed || cjst == CJState::Aborted || cjst == CJState::Failed) {
unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ continue;
+ }
+ if (cjst == CJState::NoState) {
+ LOGI("<Master>ControlJob已经进入列队");
+ m_pControlJob->queue();
+ }
+ if (m_pControlJob->state() == CJState::Queued) {
+ LOGI("<Master>ControlJob已经启动");
+ m_pControlJob->start();
+ if (m_listener.onCjStart) m_listener.onCjStart(this, m_pControlJob);
+ }
+ if (m_pControlJob->state() == CJState::Paused) {
+ LOGI("<Master>ControlJob已经恢复运行");
+ m_pControlJob->resume();
+ }
+
+ // 2) 若当前无 PJ，则选择一个并上报
+ if (m_inProcesJobs.empty()) {
+ if (auto pj = acquireNextProcessJob()) {
+ m_inProcesJobs.push_back(pj);
+ if (m_listener.onPjStart) m_listener.onPjStart(this, pj);
}
- LOGI("创建新任务<%s>...", strDescription.c_str());
+ }
+ if (m_inProcesJobs.empty()) {
+ LOGE("<Master>选择当前ProcessJob失败！");
+ unlock();
continue;
}
- unlock();
+ // 3) 若队列无 Glass，拉取到等待队列
+ if (m_queueGlasses.empty()) {
+ int nCount = acquireGlassToQueue();
+ if (nCount > 0) {
+ LOGI("<Master>已加入 %d 块Glass到工艺列队！", nCount);
+ }
+ }
+ // 4) 机器人状态
+ RMDATA& rmd = pEFEM->getRobotMonitoringData();
+ if (rmd.status != ROBOT_STATUS::Idle && rmd.status != ROBOT_STATUS::Run) {
+ unlock(); continue;
+ }
+
+ // 5) 正在执行的 RobotTask 先让它跑完一拍
+ if (m_pActiveRobotTask != nullptr) {
+ if (m_pActiveRobotTask->isPicked()) {
+ m_pActiveRobotTask->place();
+ }
+ unlock(); // 等当前任务完成或中止后继续
+ continue;
+ }
+
+ // 6) ——关键：全局统计 G1/G2 与组数门限（与单片分支对齐）——
+ auto countG1G2 = [&]() {
+ int g1 = 0, g2 = 0;
+ if (pBonder1->slotHasGlass(0)) g2++;
+ if (pBonder1->slotHasGlass(1)) g1++;
+ if (pBonder2->slotHasGlass(0)) g2++;
+ if (pBonder2->slotHasGlass(1)) g1++;
+ if (pFliper->slotHasGlass(0)) g2++;
+ if (pVacuumBake->slotHasGlass(0)) g1++;
+ if (pVacuumBake->slotHasGlass(1)) g1++;
+ if (auto g = pAligner->getGlassFromSlot(0)) {
+ auto t = g->getType();
+ if (t == MaterialsType::G1) g1++; else if (t == MaterialsType::G2) g2++;
+ }
+ return std::pair<int, int>(g1, g2);
+ };
+
+ int g1Count = 0, g2Count = 0;
+ std::tie(g1Count, g2Count) = countG1G2();
+ int nGlassGroup = min(g1Count, g2Count);
+ int nExtraType = (g1Count == g2Count ? 0 : (g1Count > g2Count ? 1 : 2));
+
+ // primary/secondary 统一定义（secondary 默认 G0）
+ MaterialsType primaryType = MaterialsType::G1;
+ MaterialsType secondaryType = MaterialsType::G0;
+ if (nExtraType == 0) primaryType = MaterialsType::G2; // 与单片分支一致
+ else primaryType = MaterialsType::G1;
+
+ // 组数门限：≥2 组时不再从 LP 上片，避免堆积（与单片一致）
+ bool blockLoadFromLP = (nGlassGroup >= 2);
+
+ // 7) Measurement -> LoadPort（固定：G1 优先回 LP）
+ if (rmd.armState[0] || rmd.armState[1]) {
+ LOGD("Arm1 %s, Arm2 %s.",
+ rmd.armState[0] ? _T("不可用") : _T("可用"),
+ rmd.armState[1] ? _T("不可用") : _T("可用"));
+ }
+ for (int s = 0; s < 4; s++) {
+ PortType pt = pLoadPorts[s]->getPortType();
+ if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
+ && (pt == PortType::Unloading || pt == PortType::Both)
+ && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
+ m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], MaterialsType::G1, secondaryType);
+ if (m_pActiveRobotTask != nullptr) { goto BATCH_PORT_PUT; }
+ }
+ }
+
+ BATCH_PORT_PUT:
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+
+ // 8) Measurement NG -> LoadPort（原位回退）
+ if (!rmd.armState[1]) {
+ m_pActiveRobotTask = createTransferTask_restore(pMeasurement, pLoadPorts);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // 9) BakeCooling -> Measurement
+ if (!rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // 10) BakeCooling 内部（Bake -> Cooling）
+ if (!rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // 11) Bonder -> BakeCooling
+ if (!rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+ if (!rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // 12) Fliper(G2) -> Bonder（前置：VacuumBake 有 processed G1；输出 G2 到 Bonder slot0）
+ if (auto pSrcSlot = pVacuumBake->getProcessedSlot(MaterialsType::G1)) {
+ if (!rmd.armState[1] && pBonder1->canPlaceGlassInSlot(0)) {
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, MaterialsType::G2, MaterialsType::G0, 2);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+ if (!rmd.armState[1] && pBonder2->canPlaceGlassInSlot(0)) {
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, MaterialsType::G2, MaterialsType::G0, 2);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+ }
+
+ // 13) VacuumBake(G1) -> Bonder（槽级判定：slot0(G2) 已有且 slot1(G1) 为空）
+ if (!rmd.armState[0] && pBonder1->slotHasGlass(0) && !pBonder1->slotHasGlass(1)) {
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, MaterialsType::G1, MaterialsType::G0);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+ if (!rmd.armState[0] && pBonder2->slotHasGlass(0) && !pBonder2->slotHasGlass(1)) {
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, MaterialsType::G1, MaterialsType::G0);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // 14) Aligner -> Fliper(G2) 以及 -> VacuumBake(G1)（固定映射）
+ if (!rmd.armState[1]) {
+ m_pActiveRobotTask = createTransferTask(pAligner, pFliper, MaterialsType::G2, MaterialsType::G0);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+ if (!rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, MaterialsType::G1, MaterialsType::G0);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // 15) Aligner -> LoadPort（restore）
+ if (!rmd.armState[1]) {
+ m_pActiveRobotTask = createTransferTask_restore(pAligner, pLoadPorts);
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // 16) LoadPort -> Aligner（受组数门限控制；统一 buddy/状态时序）
+ if (blockLoadFromLP) { unlock(); continue; }
+
+ for (int s = 0; s < 4; s++) {
+ PortType pt = pLoadPorts[s]->getPortType();
+ if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
+ && (pt == PortType::Loading || pt == PortType::Both)
+ && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
+
+ m_pActiveRobotTask = createTransferTask(pLoadPorts[s], pAligner, primaryType, secondaryType, 1, m_bJobMode);
+ if (m_pActiveRobotTask != nullptr) {
+ auto* pGlass = static_cast<CGlass*>(m_pActiveRobotTask->getContext());
+ if (pGlass->getBuddy() != nullptr) {
+ delete m_pActiveRobotTask; m_pActiveRobotTask = nullptr;
+ continue;
+ }
+
+ // 统一：queue -> start -> setContext -> move queue→inProcess -> onPanelStart
+ pGlass->queue();
+ pGlass->start();
+ pEFEM->setContext(pGlass);
+
+ bool bMoved = glassFromQueueToInPorcess(pGlass);
+ if (bMoved) {
+ LOGI("<Master>Glass(%s)从等待列队到工艺列队转移成功.", pGlass->getID().c_str());
+ }
+ else {
+ LOGE("<Master>Glass(%s)从等待列队到工艺列队转移失败.", pGlass->getID().c_str());
+ }
+
+ if (m_listener.onPanelStart) m_listener.onPanelStart(this, pGlass);
+ goto BATCH_PORT_GET;
+ }
+ }
+ }
+
+ BATCH_PORT_GET:
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+
+ unlock();
+ continue;
}
+
+
+ // 千传模式调度逻辑
+ else if (m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER) {
+ // 检测判断robot状态
+ RMDATA& rmd = pEFEM->getRobotMonitoringData();
+ if (rmd.status != ROBOT_STATUS::Idle && rmd.status != ROBOT_STATUS::Run) {
+ unlock();
+ continue;
+ }
+
+ if (m_pActiveRobotTask != nullptr) {
+ if (m_pActiveRobotTask->isPicked()) {
+ m_pActiveRobotTask->place();
+ }
+ unlock();
+ // 检测到当前有正在下午的任务，确保当前任务完成或中止后继续
+ // LOGI("检测到当前有正在下午的任务，确保当前任务完成或中止后继续...");
+ continue;
+ }
+
+ // Measurement -> LoadPort
+ for (int p = 0; p < 4; p++) {
+ if (p != m_nContinuousWorkingPort) continue;
+ PortType pt = pLoadPorts[p]->getPortType();
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_Measurement)
+ && !rmd.armState[0] && pLoadPorts[p]->isEnable()
+ && (pt == PortType::Unloading || pt == PortType::Both)
+ && pLoadPorts[p]->getPortStatus() == PORT_INUSE) {
+ for (int slot = 0; slot < SLOT_MAX; slot++) {
+ if (slot != m_nContinuousWorkingSlot) continue;
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pMeasurement,
+ 0, pLoadPorts[p], slot);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_Measurement_LoadPort;
+ m_nContinuousTransferStep = CTStep_end;
+ goto CT_PORT_PUT;
+ }
+ }
+ }
+ }
+
+ CT_PORT_PUT:
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+
+
+ // BakeCooling ->Measurement
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling3)
+ && !rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
+ 3, pMeasurement, 0);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_BakeCooling_Measurement;
+ LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling -> Measurement)...");
+ }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+
+ // BakeCooling内部
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling2)
+ && !rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
+ 2, pBakeCooling, 3);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling3;
+ LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-2 -> BakeCooling-3)...");
+ }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling1)
+ && !rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
+ 1, pBakeCooling, 2);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling2;
+ LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-1 -> BakeCooling-2)...");
+ }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_VacuumBake_BakeCooling)
+ && !rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
+ 0, pBakeCooling, 1);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling1;
+ LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-0 -> BakeCooling-1)...");
+ }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // VacuumBake(G1) -> BakeCooling
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_VacuumBake_VacuumBake)
+ && !rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pVacuumBake,
+ 1, pBakeCooling, 0);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_VacuumBake_BakeCooling;
+ LOGI("<ContinuousTransfer>千传测试，开始搬送任务(VacuumBake(G1) -> BakeCooling)...");
+ }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // VacuumBake(G1) -> VacuumBake(G1)
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Bonder2_VacuumBake)
+ && !rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pVacuumBake,
+ 0, pVacuumBake, 1);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_VacuumBake_VacuumBake;
+ LOGI("<ContinuousTransfer>千传测试，开始搬送任务(VacuumBake(G1-0) -> VacuumBake(G1-1))...");
+ }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // Bonder2 -> VacuumBake(G1)
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Bonder1_Bonder2)
+ && !rmd.armState[0]) {
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pBonder2,
+ 1, pVacuumBake, 0);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_Bonder2_VacuumBake;
+ LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Bonder2 -> VacuumBake(G1))...");
+ }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // Bonder1 -> Bonder2
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Fliper_Bonder1)
+ && !rmd.armState[0] && !pBonder2->hasBondGlass()) {
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pBonder1,
+ 1, pBonder2, 1);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_Bonder1_Bonder2;
+ LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Bonder1 -> Bonder2)...");
+ }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // Fliper(G2) -> Bonder1
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Aligner_Fliper)
+ &&!rmd.armState[0] && !pBonder1->hasBondGlass()) {
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pFliper,
+ 0, pBonder1, 1);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_Fliper_Bonder1;
+ LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Fliper(G2) -> Bonder1)...");
+ }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // Aligner -> Fliper(G2)
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_LoadPort_Aligner)
+ && !rmd.armState[1]) {
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pAligner,
+ 0, pFliper, 0);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_Aligner_Fliper;
+ LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Aligner -> Fliper(G2))...");
+ }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+ }
+
+ // LoadPort -> Aligner
+ for (int p = 0; p < 4; p++) {
+ PortType pt = pLoadPorts[p]->getPortType();
+ if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_end)
+ && !rmd.armState[0] && pLoadPorts[p]->isEnable()
+ && (pt == PortType::Loading || pt == PortType::Both)
+ && pLoadPorts[p]->getPortStatus() == PORT_INUSE) {
+ for (int slot = 0; slot < SLOT_MAX; slot++) {
+ m_pActiveRobotTask = createTransferTask_continuous_transfer(pLoadPorts[p],
+ slot, pAligner, 0);
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_LoadPort_Aligner;
+ m_nContinuousWorkingPort = p;
+ m_nContinuousWorkingSlot = slot;
+ LOGI("<ContinuousTransfer>千传测试，开始搬送任务(LoadPort -> Aligner)...");
+ pEFEM->setContext(m_pActiveRobotTask->getContext());
+ goto CT_PORT_GET;
+ }
+ }
+ }
+ }
+
+ CT_PORT_GET:
+ if (m_pActiveRobotTask != nullptr) {
+ m_nContinuousTransferStep = CTStep_begin;
+ LOGI("<ContinuousTransfer>千传测试，开始第 %d 轮", m_nContinuousTransferCount + 1);
+ }
+ CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
+
+
+ unlock();
+ continue;
+ }
+
+
unlock();
}
@@ -768,6 +1231,16 @@
unsigned CMaster::ReadBitsProc()
{
+ // 标志位清0复位
+ {
+ StationIdentifier station;
+ station.nNetNo = 0;
+ station.nStNo = 255;
+ char szBuffer[528] = { 0 }; // 0x0, 0x1087
+ m_cclink.WriteData(station, (long)DeviceType::B, 0, 528, (short*)szBuffer);
+ }
+
+
while (1) {
// 待退出信号或时间到
int nRet = ::WaitForSingleObject(m_hEventReadBitsThreadExit[0], 1000);
@@ -828,20 +1301,34 @@
listener.onPreFethedOutJob = [&](void* pEquipment, int port, CJobDataB* pJobDataB) -> BOOL {
CEquipment* p = (CEquipment*)pEquipment;
+ // 可能要加这一句
+ Sleep(750);
// 取片，更新当前搬送任务
BOOL bOk = FALSE;
lock();
if (m_pActiveRobotTask != nullptr) {
+ LOGD("<CMaster>onPreFethedOutJob 0001.");
if (m_pActiveRobotTask->getSrcPosition() == p->getID()) {
+ LOGD("<CMaster>onPreFethedOutJob 0002.");
CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getSrcSlot());
- if (pGlass != nullptr && port == m_pActiveRobotTask->getSrcSlot()) {
+ if (pGlass != nullptr) {
+ LOGD("<CMaster>onPreFethedOutJob 0003.");
CJobDataS* pJobDataS = pGlass->getJobDataS();
if (pJobDataS != nullptr
&& pJobDataS->getCassetteSequenceNo() == pJobDataB->getCassetteSequenceNo()
&& pJobDataS->getJobSequenceNo() == pJobDataB->getJobSequenceNo()) {
bOk = TRUE;
- LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
+ LOGD("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
+ }
+ LOGD("<CMaster>onPreFethedOutJob 0004.");
+ if (pJobDataS != nullptr) {
+ LOGD("<CMaster>onPreFethedOutJob 0005. %d,%d,%d,%d",
+ pJobDataS->getCassetteSequenceNo(),
+ pJobDataB->getCassetteSequenceNo(),
+ pJobDataS->getJobSequenceNo(),
+ pJobDataB->getJobSequenceNo()
+ );
}
}
}
@@ -861,6 +1348,8 @@
listener.onPreStoredJob = [&](void* pEquipment, int port, CJobDataB* pJobDataB, short& slot) -> BOOL {
CEquipment* p = (CEquipment*)pEquipment;
+ // 可能要加这一句
+ Sleep(750);
// 放片，更新当前搬送任务
BOOL bOk = FALSE;
@@ -879,10 +1368,10 @@
else if (m_pActiveRobotTask->isPlacing() &&
m_pActiveRobotTask->getTarPosition() == p->getID()) {
CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getTarSlot());
- if (pGlass == nullptr && m_pActiveRobotTask->getTarSlot() == port) {
+ if (pGlass == nullptr) {
bOk = TRUE;
slot = m_pActiveRobotTask->getTarSlot();
- LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
+ LOGI("<CMaster>onPreStoredJob, 已校验数据一致性.");
}
}
@@ -893,7 +1382,7 @@
if (pGlass == nullptr && m_pActiveRobotTask->getSrcSlot() == port) {
bOk = TRUE;
slot = m_pActiveRobotTask->getSrcSlot();
- LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
+ LOGI("<CMaster>onPreStoredJob, 已校验数据一致性.");
}
}
}
@@ -938,8 +1427,67 @@
&& m_pActiveRobotTask->getTarPosition() == p->getID()) {
m_pActiveRobotTask->stored();
m_pActiveRobotTask->completed();
+
+ if (m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER) {
+ if (m_nContinuousTransferStep == CTStep_end) {
+ m_nContinuousTransferCount++;
+ LOGI("<ContinuousTransfer>千传测试，第 %d 轮结束", m_nContinuousTransferCount);
+ if (m_listener.onCTRoundEnd != nullptr) {
+ m_listener.onCTRoundEnd(this, m_nContinuousTransferCount);
+ }
+ }
+ }
+
LOGI("放片完成...");
// 完成此条搬送任务，但要把数据和消息上抛应用层
+
+ // 如果是搬送回从AOI搬送回Port, 则glass工艺完成
+ if (m_pActiveRobotTask->getSrcPosition() == EQ_ID_MEASUREMENT) {
+ CGlass* pGlass = (CGlass*)m_pActiveRobotTask->getContext();
+ pGlass->complete();
+ CGlass* pBuddy = pGlass->getBuddy();
+ if (pBuddy != nullptr) pBuddy->complete();
+ this->saveState();
+ bool bMoved = glassFromInPorcessToComplete(pGlass);
+ if (bMoved) {
+ LOGI("<Master>Glass(%s)从工艺列队到完成列队转移成功.",
+ pGlass->getID().c_str());
+ }
+ else {
+ LOGE("<Master>Glass(%s)从工艺列队到完成列队转移失败.",
+ pGlass->getID().c_str());
+ }
+ if (m_listener.onPanelEnd != nullptr) {
+ m_listener.onPanelEnd(this, pGlass);
+ }
+
+ // 检查PJ是否已经完成
+ CProcessJob* pJob = getGlassProcessJob((CGlass*)m_pActiveRobotTask->getContext());
+ if (pJob != nullptr && checkAndUpdatePjComplete(pJob)) {
+ this->saveState();
+ LOGE("<Master>ProcessJob(%s)完成.",
+ pJob->id().c_str());
+ if (m_listener.onPjEnd != nullptr) {
+ m_listener.onPjEnd(this, pJob);
+ }
+
+ // 检查CJ是否已经完成
+ ASSERT(m_pControlJob);
+ if (checkAndUpdateCjComplete(m_pControlJob)) {
+ this->saveState();
+ LOGE("<Master>ControlJob(%s)完成.",
+ m_pControlJob->id().c_str());
+ if (m_listener.onCjEnd != nullptr) {
+ m_listener.onCjEnd(this, pJob);
+ }
+
+ completeControlJob();
+ }
+ }
+ }
+
+
+
unlock();
@@ -975,6 +1523,115 @@
listener.onProcessStateChanged = [&](void* pEquipment, PROCESS_STATE state) -> void {
LOGI("<Master>onProcessStateChanged<%d>", (int)state);
};
+ listener.onMapMismatch = [&](void* pEquipment, short scanMap, short downMap) {
+ LOGE("<Master-%s>Port InUse, map(%d!=%d)不一致，请检查。",
+ ((CEquipment*)pEquipment)->getName().c_str(), scanMap, downMap);
+ };
+ listener.onPortStatusChanged = [&](void* pEquipment, short status, __int64 data) {
+ LOGE("<Master-%s>onPortStatusChanged。status=%d, data=%lld", ((CEquipment*)pEquipment)->getName().c_str(), status);
+ if (status == PORT_INUSE && m_pControlJob != nullptr) {
+ CLoadPort* pPort = (CLoadPort*)pEquipment;
+ auto pjs = m_pControlJob->getPjs();
+ for (auto pj : pjs) {
+ auto carrier = pj->getCarrier(pPort->getCassetteId());
+ if (carrier != nullptr) {
+ carrier->contexts.clear();
+ for (auto slot : carrier->slots) {
+ CGlass* pGlass = pPort->getGlassFromSlot(slot);
+ carrier->contexts.push_back((void*)pGlass);
+ if (pGlass != nullptr) {
+ pGlass->setProcessJob(pj);
+
+ PJWarp& jpWarp = pj->getPjWarp();
+ int nRecipeID = RecipeManager::getInstance().getIdByPPID(pj->recipeSpec());
+ RecipeInfo stRecipeInfo = RecipeManager::getInstance().getRecipeByPPID(pj->recipeSpec());
+ std::vector<DeviceRecipe> vecRecipeInfo = stRecipeInfo.vecDeviceList;
+
+ pGlass->setScheduledForProcessing(jpWarp.checkSlot[slot-1]);
+ pGlass->setType(static_cast<SERVO::MaterialsType>(jpWarp.material[slot-1]));
+
+ SERVO::CJobDataS* pJobDataS = pGlass->getJobDataS();
+ if (pJobDataS != nullptr) {
+ SERVO::CJobDataS* pJobDataS = pGlass->getJobDataS();
+ pJobDataS->setLotId(pj->getLotId().c_str());
+ pJobDataS->setProductId(pj->getProductId().c_str());
+ pJobDataS->setOperationId(pj->getOperationId().c_str());
+ pJobDataS->setMaterialsType(jpWarp.material[slot - 1]);
+ pJobDataS->setMasterRecipe(nRecipeID);
+ for (const auto& info : vecRecipeInfo) {
+ const std::string& name = info.strDeviceName;
+ short nRecipeID = (short)info.nRecipeID;
+
+ if (name == EQ_NAME_EFEM) {
+ pJobDataS->setDeviceRecipeId(0, nRecipeID);
+ }
+ else if (name == EQ_NAME_BONDER1) {
+ pJobDataS->setDeviceRecipeId(1, nRecipeID);
+ }
+ else if (name == EQ_NAME_BONDER2) {
+ pJobDataS->setDeviceRecipeId(2, nRecipeID);
+ }
+ else if (name == EQ_NAME_BAKE_COOLING) {
+ pJobDataS->setDeviceRecipeId(3, nRecipeID);
+ }
+ else if (name == EQ_NAME_VACUUMBAKE) {
+ pJobDataS->setDeviceRecipeId(4, nRecipeID);
+ }
+ else if (name == EQ_NAME_MEASUREMENT) {
+ pJobDataS->setDeviceRecipeId(5, nRecipeID);
+ }
+ }
+
+ }
+ }
+ }
+ }
+ }
+ }
+
+ if (m_listener.onLoadPortStatusChanged != nullptr) {
+ m_listener.onLoadPortStatusChanged(this, (CEquipment*)pEquipment, status, data);
+ }
+ };
+ listener.onSVDataReport = [&](void* pEquipment, void* pData) {
+ CSVData* pSVData = (CSVData*)pData;
+ auto rawData = pSVData->getSVRawData();
+ std::vector<CParam> params;
+ ((CEquipment*)pEquipment)->parsingSVData((const char*)rawData.data(), rawData.size(), params);
+
+ std::string strOut;
+ char szBuffer[256];
+ for (auto p : params) {
+ if (!strOut.empty()) strOut.append(",");
+ if (p.getValueType() == PVT_INT) {
+ sprintf_s(szBuffer, 256, "%s:%d", p.getName().c_str(), p.getIntValue());
+ }
+ else if (p.getValueType() == PVT_DOUBLE) {
+ sprintf_s(szBuffer, 256, "%s:%f", p.getName().c_str(), p.getDoubleValue());
+ }
+ strOut.append(szBuffer);
+ }
+ LOGD("<CMaster-%s>SVDataReport:%s", ((CEquipment*)pEquipment)->getName().c_str(), strOut.c_str());
+ };
+ listener.onPanelDataReport = [&](void* pEquipment, void* pContext) {
+ LOGD("<CMaster-%s>onPanelDataReport", ((CEquipment*)pEquipment)->getName().c_str());
+
+ CEquipment* pEq = (CEquipment*)pEquipment;
+ CGlass* pGlass = (CGlass*)pContext;
+
+ // 如果AOI检测失败，要停机
+ if (pEq->getID() == EQ_ID_MEASUREMENT) {
+ LOGD("<CMaster-%s>onPanelDataReport 01", ((CEquipment*)pEquipment)->getName().c_str());
+ if (pGlass->getAOIInspResult() == InspResult::Fail) {
+ LOGD("<CMaster-%s>onPanelDataReport 02", ((CEquipment*)pEquipment)->getName().c_str());
+ if (stop() == 0) {
+ m_nLastError = ER_CODE_AOI_NG;
+ m_strLastError = "AOI检测未通过.";
+ }
+ }
+ }
+
+ };
pEquipment->setListener(listener);
pEquipment->setCcLink(&m_cclink);
m_listEquipment.push_back(pEquipment);
@@ -988,6 +1645,15 @@
}
CEquipment* CMaster::getEquipment(int id)
+ {
+ for (auto item : m_listEquipment) {
+ if (item->getID() == id) return item;
+ }
+
+ return nullptr;
+ }
+
+ CEquipment* CMaster::getEquipment(int id) const
{
for (auto item : m_listEquipment) {
if (item->getID() == id) return item;
@@ -1012,6 +1678,7 @@
pEquipment->setID(EQ_ID_LOADPORT1 + index);
pEquipment->setName(szName);
pEquipment->setDescription(szName);
+ pEquipment->setCompareMapsBeforeProceeding(m_isCompareMapsBeforeProceeding);
addToEquipmentList(pEquipment);
@@ -1202,6 +1869,64 @@
}
}
+
+
+ // 模拟测试
+ /*
+ static int aaa = 0;
+ aaa++;
+ if (aaa % 30 == 0) {
+ if (!m_queueGlasses.empty()) {
+ CGlass* pGlass = m_queueGlasses.front();
+ pGlass->start();
+ glassFromQueueToInPorcess(pGlass);
+ this->saveState();
+
+ // 这里上报Panel Start事件
+ if (m_listener.onPanelStart != nullptr) {
+ m_listener.onPanelStart(this, pGlass);
+ }
+ }
+ }
+
+ if (aaa % 45 == 0) {
+ if (!m_inProcesGlasses.empty()) {
+ CGlass* pGlass = m_inProcesGlasses.front();
+ pGlass->complete();
+ CGlass* pBuddy = pGlass->getBuddy();
+ if (pBuddy != nullptr) pBuddy->complete();
+ glassFromInPorcessToComplete(pGlass);
+ this->saveState();
+
+ // 这里上报Panel End事件
+ if (m_listener.onPanelEnd != nullptr) {
+ m_listener.onPanelEnd(this, pGlass);
+ }
+
+ CProcessJob* pJob = getGlassProcessJob(pGlass);
+ if (pJob != nullptr && checkAndUpdatePjComplete(pJob)) {
+ processJobFromInPorcessToComplete(pJob);
+ this->saveState();
+ LOGE("<Master>ProcessJob(%s)完成.",
+ pJob->id().c_str());
+ if (m_listener.onPjEnd != nullptr) {
+ m_listener.onPjEnd(this, pJob);
+ }
+
+ // 检查CJ是否已经完成
+ ASSERT(m_pControlJob);
+ if (checkAndUpdateCjComplete(m_pControlJob)) {
+ this->saveState();
+ LOGE("<Master>ControlJob(%s)完成.",
+ m_pControlJob->id().c_str());
+ if (m_listener.onCjEnd != nullptr) {
+ m_listener.onCjEnd(this, pJob);
+ }
+ }
+ }
+ }
+ }
+ */
}
void CMaster::connectEquipments()
@@ -1366,17 +2091,22 @@
static int taskSeqNo = 0;
CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq,
MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
- int armNo/* = 1*/)
+ int armNo/* = 1*/, BOOL bJobMode/* = FALSE*/)
{
+ if (!pSrcEq->IsEnabled()) {
+ return nullptr;
+ }
CRobotTask* pTask = nullptr;
CSlot* pSrcSlot, * pTarSlot;
+ pSrcEq->m_nTestFlag = m_nTestFlag;
pTarSlot = pTarEq->getAvailableSlotForGlass(primaryType);
- pSrcSlot = pSrcEq->getProcessedSlot(primaryType);
- if (pSrcSlot == nullptr || nullptr == pTarSlot) {
+ pSrcSlot = pSrcEq->getProcessedSlot(primaryType, bJobMode);
+ if (m_nTestFlag == 1) LOGD("createTransferTask 003 %x, %x", pTarSlot, pSrcSlot);
+ if ((pSrcSlot == nullptr || nullptr == pTarSlot) && secondaryType != SERVO::MaterialsType::G0) {
pTarSlot = pTarEq->getAvailableSlotForGlass(secondaryType);
- pSrcSlot = pSrcEq->getProcessedSlot(secondaryType);
+ pSrcSlot = pSrcEq->getProcessedSlot(secondaryType, bJobMode);
}
-
+ if (m_nTestFlag == 1) LOGD("createTransferTask 004 %x, %x", pTarSlot, pSrcSlot);
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
@@ -1392,6 +2122,10 @@
CRobotTask* CMaster::createTransferTask_bonder_to_bakecooling(CEquipment* pSrcEq, CEquipment* pTarEq)
{
+ if (!pSrcEq->IsEnabled()) {
+ return nullptr;
+ }
+
std::vector<int> slots = {1, 3};
CRobotTask* pTask = nullptr;
@@ -1413,6 +2147,10 @@
CRobotTask* CMaster::createTransferTask_bake_to_cooling(CEquipment* pSrcEq)
{
+ if (!pSrcEq->IsEnabled()) {
+ return nullptr;
+ }
+
std::vector<int> slotsTar = { 2, 4 };
std::vector<int> slotsSrc = { 1, 3 };
@@ -1435,6 +2173,10 @@
CRobotTask* CMaster::createTransferTask_bakecooling_to_measurement(CEquipment* pSrcEq, CEquipment* pTarEq)
{
+ if (!pSrcEq->IsEnabled()) {
+ return nullptr;
+ }
+
std::vector<int> slots = { 2, 4 };
CRobotTask* pTask = nullptr;
@@ -1447,6 +2189,71 @@
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ }
+
+
+ return pTask;
+ }
+
+ CRobotTask* CMaster::createTransferTask_restore(CEquipment* pEqSrc, CLoadPort** pPorts)
+ {
+ if (!pEqSrc->IsEnabled()) {
+ return nullptr;
+ }
+
+ CRobotTask* pTask = nullptr;
+ CSlot* pSrcSlot, * pTarSlot = nullptr, * pTempSlot;
+ pSrcSlot = pEqSrc->getInspFailSlot();
+ if (pSrcSlot != nullptr) {
+ CGlass* pGlass = (CGlass*)pSrcSlot->getContext();
+ ASSERT(pGlass);
+ int port, slot;
+ pGlass->getOrginPort(port, slot);
+ pGlass->setInspResult(pPorts[port]->getID(), 0, InspResult::Fail);
+ ASSERT(0 <= port && port < 4);
+ ASSERT(0 <= slot && slot < 8);
+ pTempSlot = pPorts[port]->getSlot(slot);
+ if (pTempSlot->getContext() == nullptr) {
+ pTarSlot = pTempSlot;
+ }
+ }
+
+
+ if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ pTask = new CRobotTask();
+ pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ }
+
+
+ return pTask;
+ }
+
+ CRobotTask* CMaster::createTransferTask_continuous_transfer(CEquipment* pSrcEq, int nSrcSlot,
+ CEquipment* pTarEq, int nTarSlot, int armNo/* = 1*/)
+ {
+ if (!pSrcEq->IsEnabled()) {
+ return nullptr;
+ }
+ if (!pTarEq->IsEnabled()) {
+ return nullptr;
+ }
+
+ CRobotTask* pTask = nullptr;
+ CSlot* pSrcSlot = pSrcEq->getProcessedSlotCt(nSrcSlot);
+ if (pSrcSlot != nullptr && pSrcEq->getID() == EQ_ID_MEASUREMENT
+ && (pTarEq->getID() == EQ_ID_LOADPORT1 || pTarEq->getID() == EQ_ID_LOADPORT2 || pTarEq->getID() == EQ_ID_LOADPORT3 || pTarEq->getID() == EQ_ID_LOADPORT4)) {
+ pTarEq->removeGlass(1);
+ }
+ CSlot* pTarSlot = pTarEq->isSlotAvailable(nTarSlot);
+ if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ pTask = new CRobotTask();
+ pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, armNo, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1474,7 +2281,8 @@
unlock();
// 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
- stop();
+ // 25年7月23日后修改为不停止任务
+ // stop();
return 0;
}
@@ -1491,11 +2299,31 @@
return 0;
}
- void CMaster::setPortType(unsigned int index, BOOL enable, int type, int mode,
- int cassetteType, int transferMode, BOOL autoChangeEnable)
+ int CMaster::resendCurrentTask()
+ {
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->resend();
+ }
+ unlock();
+
+
+ return 0;
+ }
+
+ void CMaster::setPortType(unsigned int index, int type)
{
ASSERT(index < 4);
int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4};
+ CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
+ pPort->localSetPortType((SERVO::PortType)type);
+ }
+
+ void CMaster::setPortTypeEx(unsigned int index, BOOL enable, int type, int mode,
+ int cassetteType, int transferMode, BOOL autoChangeEnable)
+ {
+ ASSERT(index < 4);
+ int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
pPort->localEanblePort(enable);
pPort->localSetPortType((SERVO::PortType)type);
@@ -1504,4 +2332,680 @@
pPort->localSetTransferMode((SERVO::TransferMode)transferMode);
pPort->localAutoChangeEnable(autoChangeEnable);
}
+
+ void CMaster::setPortCassetteType(unsigned int index, SERVO::CassetteType type)
+ {
+ ASSERT(index < 4);
+ int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
+ CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
+ pPort->localSetCessetteType(type);
+ }
+
+ void CMaster::setPortEnable(unsigned int index, BOOL bEnable)
+ {
+ ASSERT(index < 4);
+ int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
+ CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
+ pPort->localEanblePort(bEnable);
+ }
+
+ int CMaster::getPortCassetteSnSeed(int port)
+ {
+ ASSERT(1 <= port && port <= 4);
+ int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
+ CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[port - 1]);
+ return pPort->getPortCassetteSnSeed();
+ }
+
+ void CMaster::setPortCassetteSnSeed(int port, int seed)
+ {
+ ASSERT(1 <= port && port <= 4);
+ int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
+ CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[port - 1]);
+ return pPort->setPortCassetteSnSeed(seed);
+ }
+
+ void CMaster::setCompareMapsBeforeProceeding(BOOL bCompare)
+ {
+ m_isCompareMapsBeforeProceeding = bCompare;
+ }
+
+ void CMaster::setJobMode(BOOL bJobMode)
+ {
+ m_bJobMode = bJobMode;
+ }
+
+ void CMaster::datetimeSync(SYSTEMTIME& time)
+ {
+ for (auto item : m_listEquipment) {
+ item->setDateTime(time.wYear, time.wMonth, time.wDay,
+ time.wHour, time.wMinute, time.wSecond);
+ }
+ }
+
+ void CMaster::enableEventReport(bool bEnable)
+ {
+ m_bEnableEventReport = bEnable;
+ }
+
+ void CMaster::enableAlarmReport(bool bEnable)
+ {
+ m_bEnableAlarmReport = bEnable;
+ }
+
+ bool CMaster::isAlarmReportEnable()
+ {
+ return m_bEnableAlarmReport;
+ }
+
+ int CMaster::proceedWithCarrier(unsigned int port)
+ {
+ if (port >= 4) return -1;
+
+ static int pid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4};
+ CLoadPort* pPort = (CLoadPort*)getEquipment(pid[port]);
+ pPort->sendCassetteCtrlCmd(CCC_PROCESS_START, nullptr, 0, 0, 0, nullptr, nullptr);
+ return 0;
+ }
+
+ int CMaster::carrierRelease(unsigned int port)
+ {
+ if (port >= 4) return -1;
+
+ static int pid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
+ CLoadPort* pPort = (CLoadPort*)getEquipment(pid[port]);
+ pPort->sendCassetteCtrlCmd(CCC_PROCESS_CANCEL, nullptr, 0, 0, 0, nullptr, nullptr);
+ return 0;
+ }
+
+ int CMaster::getContinuousTransferCount()
+ {
+ return m_nContinuousTransferCount;
+ }
+
+ void CMaster::setContinuousTransferCount(int round)
+ {
+ m_nContinuousTransferCount = round;
+ }
+
+ int CMaster::setProcessJobs(std::vector<CProcessJob*>& pjs)
+ {
+ std::vector<SERVO::CProcessJob*> temp;
+ for (auto p : pjs) {
+ if (p->validate(*this)) {
+ p->queue();
+ temp.push_back(p);
+ }
+ }
+ m_processJobs = temp;
+
+
+ // 更新context
+ std::vector<uint8_t> newSlots;
+ std::vector<void*> newContexts;
+ for (auto pj : m_processJobs) {
+ for (auto& c : pj->carriers()) {
+ auto pPort = getPortWithCarrierId(c.carrierId);
+ if (pPort == nullptr) continue;
+
+ for (auto s : c.slots) {
+ auto pGlass = pPort->getGlassFromSlot(s);
+ if (pGlass == nullptr) continue;
+
+ newSlots.push_back(s);
+ newContexts.push_back(pGlass);
+ }
+
+ pj->setCarrierSlotsAndContexts(c.carrierId, newSlots, newContexts);
+ }
+ }
+
+
+
+ this->saveState();
+
+ return (int)m_processJobs.size();
+ }
+
+ std::vector<CProcessJob*>& CMaster::getProcessJobs()
+ {
+ return m_processJobs;
+ }
+
+ CProcessJob* CMaster::getProcessJob(const std::string& id)
+ {
+ for (auto item : m_processJobs) {
+ if (item->id().compare(id) == 0) return item;
+ }
+
+ return nullptr;
+ }
+
+ int CMaster::setControlJob(CControlJob& controlJob)
+ {
+ // 回调：是否参创建ControlJob
+ auto canCreateCjFn = [&](uint32_t& cc, std::string& mm) -> bool {
+ if (m_pControlJob != nullptr) {
+ cc = 1100;
+ mm = "当前ControlJob未结批，不能创建新的ControlJob";
+ return false;
+ }
+ return true;
+ };
+
+
+ // 回调：是否存在
+ auto pjExists = [&](const std::string& id) -> bool {
+ return getProcessJob(id) != nullptr;
+ };
+
+ // 回调：是否可加入 CJ（这里定义：必须是 Queued）
+ auto pjJoinable = [&](const std::string& id) -> bool {
+ auto pj = getProcessJob(id);
+ if (pj == nullptr) return false;
+ return pj->state() == PJState::Queued;
+ };
+
+ bool bRet = controlJob.validateForCreate(canCreateCjFn, pjExists, pjJoinable);
+ if (!bRet) return -1;
+
+ std::vector<CProcessJob*> temps;
+ m_pControlJob = new CControlJob(controlJob);
+ auto pjIds = controlJob.pjIds();
+ for (auto id : pjIds) {
+ auto pj = getProcessJob(id);
+ if (pj != nullptr) {
+ temps.push_back(pj);
+ }
+ }
+ m_pControlJob->setPJs(temps);
+ this->saveState();
+
+
+ return 0;
+ }
+
+ CControlJob* CMaster::getControlJob()
+ {
+ return m_pControlJob;
+ }
+
+ CLoadPort* CMaster::getPortWithCarrierId(const std::string& carrierId) const
+ {
+ CLoadPort* pPort;
+ int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4};
+ for (int i = 0; i < 4; i++) {
+ pPort = (CLoadPort*)getEquipment(eqid[i]);
+ ASSERT(pPort);
+ if (pPort->getCassetteId().compare(carrierId) == 0) return pPort;
+ }
+
+ return nullptr;
+ }
+
+ bool CMaster::isProcessJobsEmpty() const
+ {
+ return m_processJobs.empty();
+ }
+
+ bool CMaster::recipeExists(const std::string& ppid) const
+ {
+ std::vector<std::string> vecRecipe = RecipeManager::getInstance().getAllPPID();
+ bool exists = std::find(vecRecipe.begin(), vecRecipe.end(), ppid) != vecRecipe.end();
+ return exists;
+ }
+
+ bool CMaster::carrierPresent(const std::string& carrierId) const
+ {
+ CLoadPort* pPort = getPortWithCarrierId(carrierId);
+ return pPort != nullptr;
+ }
+
+ bool CMaster::slotUsable(const std::string& carrierId, uint16_t slot) const
+ {
+ CLoadPort* pPort = getPortWithCarrierId(carrierId);
+ if(pPort == nullptr) return false;
+ CSlot* pSlot = pPort->getSlot(slot);
+ if (pSlot == nullptr) return false;
+ return pSlot->isEnable();
+ }
+
+ bool CMaster::ceidDefined(uint32_t ceid) const
+ {
+ return true;
+ }
+
+ bool CMaster::saveState() const
+ {
+ std::ofstream ofs(m_strStatePath, std::ios::binary);
+ if (!ofs) return false;
+
+ // 文件头
+ uint32_t magic = 0x4D415354; // 'MAST'
+ uint16_t version = 1;
+ ofs.write(reinterpret_cast<const char*>(&magic), sizeof(magic));
+ ofs.write(reinterpret_cast<const char*>(&version), sizeof(version));
+
+ // 保存 ControlJob
+ bool hasCJ = (m_pControlJob != nullptr);
+ ofs.write(reinterpret_cast<const char*>(&hasCJ), sizeof(hasCJ));
+ if (hasCJ) {
+ m_pControlJob->serialize(ofs);
+ }
+
+ // 保存 ProcessJob 列表
+ uint32_t count = static_cast<uint32_t>(m_processJobs.size());
+ ofs.write(reinterpret_cast<const char*>(&count), sizeof(count));
+ for (const auto& job : m_processJobs) {
+ job->serialize(ofs);
+ }
+
+ // 以后可以在这里追加新字段
+ return true;
+ }
+
+ bool CMaster::loadState()
+ {
+ std::ifstream ifs(m_strStatePath, std::ios::binary);
+ if (!ifs) return false;
+
+ // 文件头
+ uint32_t magic = 0;
+ uint16_t version = 0;
+ ifs.read(reinterpret_cast<char*>(&magic), sizeof(magic));
+ ifs.read(reinterpret_cast<char*>(&version), sizeof(version));
+
+ if (magic != 0x4D415354) {
+ // 文件不合法
+ return false;
+ }
+
+ if (m_pControlJob != nullptr) {
+ delete m_pControlJob;
+ m_pControlJob = nullptr;
+ }
+
+ // 读取 ControlJob
+ bool hasCJ = false;
+ ifs.read(reinterpret_cast<char*>(&hasCJ), sizeof(hasCJ));
+ if (hasCJ) {
+ m_pControlJob = new CControlJob();
+ if (!CControlJob::deserialize(ifs, *m_pControlJob)) return false;
+ }
+ else {
+ return false;
+ }
+
+ // 读取 ProcessJob 列表
+ uint32_t count = 0;
+ ifs.read(reinterpret_cast<char*>(&count), sizeof(count));
+ m_processJobs.clear();
+ for (uint32_t i = 0; i < count; i++) {
+ CProcessJob* pProcessJob = new CProcessJob();
+ if (!CProcessJob::deserialize(ifs, *pProcessJob)) return false;
+ m_processJobs.push_back(pProcessJob);
+ }
+
+
+ // 找到CProcessJob指针加入列表中
+ std::vector<CProcessJob*> tempPjs;
+ auto ids = m_pControlJob->pjIds();
+ for (auto id : ids) {
+ auto pj = getProcessJob(id);
+ if (pj != nullptr) {
+ tempPjs.push_back(pj);
+ }
+ }
+ m_pControlJob->setPJs(tempPjs);
+
+
+ // 更新contexts
+ auto pjs = m_pControlJob->getPjs();
+ for (auto pj : pjs) {
+ for (auto& c : pj->carriers()) {
+ auto p = getPortWithCarrierId(c.carrierId);
+ if (p == nullptr) continue;
+
+ std::vector<void*> contexts;
+ for (auto s : c.slots) {
+ auto g = getGlass(p->getIndex(), s - 1);
+ if (g == nullptr) continue;
+ contexts.push_back(g);
+ }
+ pj->setCarrierContexts(c.carrierId, contexts);
+ }
+ }
+
+
+ // 如果版本升级，可在这里判断 version 来加载新字段
+
+
+ return true;
+ }
+
+ void CMaster::setStateFile(const std::string& path)
+ {
+ m_strStatePath = path;
+ }
+
+ CProcessJob* CMaster::acquireNextProcessJob()
+ {
+ auto& pjs = m_pControlJob->getPjs();
+ for (const auto pj : pjs) {
+ if (pj->state() == PJState::Queued) {
+ pj->start();
+ return pj;
+ }
+ }
+
+
+ return nullptr;
+ }
+
+ CGlass* CMaster::acquireNextGlass()
+ {
+ for (auto* pj : m_inProcesJobs) {
+ // 遍历 PJ 的 carriers 和 slots
+ for (auto& cs : pj->carriers()) {
+ for (auto ctx : cs.contexts) {
+ CGlass* pGlass = (CGlass*)ctx;
+ if (pGlass->state() == GlsState::NoState) {
+ pGlass->queue();
+ return pGlass;
+ }
+ }
+ }
+ }
+ return nullptr; // 没有可加工的 Glass
+ }
+
+ int CMaster::acquireGlassToQueue()
+ {
+ int nCount = 0;
+ for (auto* pj : m_inProcesJobs) {
+ // 遍历 PJ 的 carriers 和 slots
+ if (pj->carriers().empty()) continue;
+ for (auto& cs : pj->carriers()) {
+ for (auto ctx : cs.contexts) {
+ CGlass* pGlass = (CGlass*)ctx;
+ if (pGlass->state() == GlsState::NoState) {
+ pGlass->queue();
+ if(addGlassToQueue(pGlass)) nCount++;
+ }
+ }
+ }
+ }
+ return nCount;
+ }
+
+ bool CMaster::addGlassToQueue(CGlass* pGlass)
+ {
+ for (auto g : m_queueGlasses) {
+ if (g == pGlass) return false;
+ }
+
+ m_queueGlasses.push_back(pGlass);
+ return true;
+ }
+
+ bool CMaster::glassFromQueueToInPorcess(CGlass* pGlass)
+ {
+ auto it = std::find(m_queueGlasses.begin(), m_queueGlasses.end(), pGlass);
+ if (it != m_queueGlasses.end()) {
+ m_inProcesGlasses.push_back(*it);
+ m_queueGlasses.erase(it);
+ return true;
+ }
+ return false;
+ }
+
+ bool CMaster::glassFromInPorcessToComplete(CGlass* pGlass)
+ {
+ auto it = std::find(m_inProcesGlasses.begin(), m_inProcesGlasses.end(), pGlass);
+ if (it != m_inProcesGlasses.end()) {
+ m_completeGlasses.push_back(*it);
+ m_inProcesGlasses.erase(it);
+ return true;
+ }
+ return false;
+ }
+
+ bool CMaster::processJobFromInPorcessToComplete(CProcessJob* pProcessJob)
+ {
+ auto it = std::find(m_inProcesJobs.begin(), m_inProcesJobs.end(), pProcessJob);
+ if (it != m_inProcesJobs.end()) {
+ m_completeProcessJobs.push_back(*it);
+ m_inProcesJobs.erase(it);
+ return true;
+ }
+ return false;
+ }
+
+ bool CMaster::checkAndUpdatePjComplete(CProcessJob* pJob)
+ {
+ ASSERT(pJob);
+ auto state = pJob->state();
+ if (state != PJState::InProcess && state != PJState::Paused) return false;
+
+ for (auto c : pJob->carriers()) {
+ for (auto g : c.contexts) {
+ auto state = ((CGlass*)g)->state();
+ if (state != GlsState::Aborted && state != GlsState::Completed
+ && state != GlsState::Failed) return false;
+ }
+ }
+
+ return pJob->complete();
+ }
+
+ bool CMaster::checkAndUpdateCjComplete(CControlJob* pJob)
+ {
+ ASSERT(pJob);
+ auto state = pJob->state();
+ if (state != CJState::Executing && state != CJState::Paused) return false;
+
+ for (auto pj : pJob->getPjs()) {
+ auto state = pj->state();
+ if (state != PJState::Aborted && state != PJState::Completed
+ && state != PJState::Failed) {
+ return false;
+ }
+ }
+
+ return pJob->complete();
+ }
+
+ CProcessJob* CMaster::getGlassProcessJob(CGlass* pGlass)
+ {
+ if (m_pControlJob == nullptr) return nullptr;
+ for (auto pj : m_pControlJob->getPjs()) {
+ for (auto c : pj->carriers()) {
+ for (auto g : c.contexts) {
+ if (g == pGlass) return pj;
+ }
+ }
+ }
+
+ return nullptr;
+ }
+
+
+ bool CMaster::completeControlJob()
+ {
+ if (m_pControlJob == nullptr) {
+ return false;
+ }
+ for (auto item : m_processJobs) {
+ if (item->state() != PJState::Completed) return false;
+ }
+ if (m_pControlJob->state() != CJState::Completed)
+ return false;
+
+
+
+ // 释放Job相关
+ for (auto item : m_processJobs) {
+ delete item;
+ }
+ m_processJobs.clear();
+ if (m_pControlJob != nullptr) {
+ delete m_pControlJob;
+ m_pControlJob = nullptr;
+ }
+
+ // 注意要释放引用
+ m_inProcesJobs.clear();
+ m_completeProcessJobs.clear();
+ m_queueGlasses.clear();
+ m_inProcesGlasses.clear();
+ m_completeGlasses.clear();
+
+
+ saveState();
+
+ return true;
+ }
+
+ bool CMaster::forceCompleteControlJob(std::string description)
+ {
+ if (m_pControlJob == nullptr || m_state != SERVO::MASTERSTATE::READY) {
+ return false;
+ }
+ for (auto item : m_processJobs) {
+ item->abort(description);
+ }
+ m_pControlJob->abort(description);
+
+
+ // 释放Job相关
+ for (auto item : m_processJobs) {
+ delete item;
+ }
+ m_processJobs.clear();
+ if (m_pControlJob != nullptr) {
+ delete m_pControlJob;
+ m_pControlJob = nullptr;
+ }
+
+ // 注意要释放引用
+ m_inProcesJobs.clear();
+ m_completeProcessJobs.clear();
+ m_queueGlasses.clear();
+ m_inProcesGlasses.clear();
+ m_completeGlasses.clear();
+
+
+ saveState();
+
+ return true;
+ }
+
+ bool CMaster::canCreateControlJob()
+ {
+ return m_pControlJob == nullptr;
+ }
+
+ bool CMaster::canCompleteControlJob()
+ {
+ return m_pControlJob != nullptr && m_state == SERVO::MASTERSTATE::READY;
+ }
+
+ bool CMaster::canDeleteControlJob()
+ {
+ return m_pControlJob != nullptr
+ && m_pControlJob->state() == CJState::NoState
+ && m_state == SERVO::MASTERSTATE::READY;
+ }
+
+ int CMaster::getWipGlasses(std::vector<CGlass*>& glasses)
+ {
+ for (auto eq : m_listEquipment) {
+ auto p = dynamic_cast<CLoadPort*>(eq);
+ if (p == nullptr) {
+ eq->getAllGlass(glasses);
+ }
+
+ }
+
+ return (int)glasses.size();
+ }
+
+ int CMaster::getLastError()
+ {
+ return m_nLastError;
+ }
+
+ std::string& CMaster::getLastErrorText()
+ {
+ return m_strLastError;
+ }
+
+ void CMaster::test()
+ {
+ if (stop() == 0) {
+ m_nLastError = ER_CODE_AOI_NG;
+ m_strLastError = "AOI检测未通过.";
+ }
+ }
+
+ bool CMaster::moveGlassToBuf(int eqid, int slotNo)
+ {
+ CEquipment* pEquipment = getEquipment(eqid);
+ if (pEquipment == nullptr) return false;
+
+ CSlot* pSlot = pEquipment->getSlotWithNo(slotNo);
+ if (pSlot == nullptr) return false;
+
+ CGlass* pGlass = (CGlass*)pSlot->getContext();
+ m_bufGlass.push_back(pGlass);
+ pGlass->addRef();
+ pSlot->setContext(nullptr);
+
+ m_bDataModify = TRUE;
+ if (m_listener.onEqDataChanged != nullptr) {
+ m_listener.onEqDataChanged(this, pEquipment, 0);
+ }
+
+ return true;
+ }
+
+ bool CMaster::moveGlassToSlot(int eqid, int slotNo)
+ {
+ CEquipment* pEquipment = getEquipment(eqid);
+ if (pEquipment == nullptr) return false;
+
+ CSlot* pSlot = pEquipment->getSlotWithNo(slotNo);
+ if (pSlot == nullptr) return false;
+ if (m_bufGlass.empty()) return false;
+
+ CGlass* pGlass = m_bufGlass.front();
+ m_bufGlass.pop_front();
+ if (pGlass == nullptr) return false;
+ pSlot->setContext(pGlass);
+ pGlass->release();
+
+ m_bDataModify = TRUE;
+ if (m_listener.onEqDataChanged != nullptr) {
+ m_listener.onEqDataChanged(this, pEquipment, 0);
+ }
+
+ return true;
+ }
+
+ CGlass* CMaster::getGlass(int scrPort, int scrSlot)
+ {
+ for (auto eq : m_listEquipment) {
+ std::vector<CGlass*> glasses;
+ eq->getAllGlass(glasses);
+ for (auto g : glasses) {
+ int p, s;
+ g->getOrginPort(p, s);
+ if (p == scrPort && s == scrSlot) {
+ return g;
+ }
+ }
+ }
+
+ return nullptr;
+ }
}
--
Gitblit v1.9.3