From 98d66db6f691dcffd21f77130c138f710704b14c Mon Sep 17 00:00:00 2001
From: mrDarker <mr.darker@163.com>
Date: 星期四, 24 七月 2025 10:39:05 +0800
Subject: [PATCH] 1. EFEM添加获取配方列表事件
---
SourceCode/Bond/Servo/CMaster.cpp | 217 +++++++++++++++++++++++++++++++++++++++++-------------
1 files changed, 164 insertions(+), 53 deletions(-)
diff --git a/SourceCode/Bond/Servo/CMaster.cpp b/SourceCode/Bond/Servo/CMaster.cpp
index 6498901..6c9a004 100644
--- a/SourceCode/Bond/Servo/CMaster.cpp
+++ b/SourceCode/Bond/Servo/CMaster.cpp
@@ -51,6 +51,7 @@
m_state = MASTERSTATE::READY;
m_pActiveRobotTask = nullptr;
m_nLastError = 0;
+ m_isCompareMapsBeforeProceeding = FALSE;
InitializeCriticalSection(&m_criticalSection);
}
@@ -297,11 +298,12 @@
// 各种机器
+ CLoadPort* pLoadPorts[4];
CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
- CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
- CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
- CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
- CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
+ pLoadPorts[0] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
+ pLoadPorts[1] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
+ pLoadPorts[2] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
+ pLoadPorts[3] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
CVacuumBake* pVacuumBake = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
@@ -311,10 +313,10 @@
CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
ASSERT(pEFEM);
- ASSERT(pLoadPort1);
- ASSERT(pLoadPort2);
- ASSERT(pLoadPort3);
- ASSERT(pLoadPort4);
+ ASSERT(pLoadPorts[0]);
+ ASSERT(pLoadPorts[1]);
+ ASSERT(pLoadPorts[2]);
+ ASSERT(pLoadPorts[3]);
ASSERT(pFliper);
ASSERT(pVacuumBake);
ASSERT(pAligner);
@@ -540,19 +542,20 @@
// Measurement -> LoadPort
- LOGI("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"),
- rmd.armState[1] ? _T("不可用") : _T("可用"));
- CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
+ if (rmd.armState[0] || rmd.armState[1]) {
+ LOGI("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"),
+ rmd.armState[1] ? _T("不可用") : _T("可用"));
+ }
CEquipment* pEqTar[] = { pVacuumBake, pFliper };
if (primaryType == MaterialsType::G2) {
pEqTar[0] = pFliper;
pEqTar[1] = pVacuumBake;
}
for (int s = 0; s < 4; s++) {
- if (!rmd.armState[0] && pEqLoadPort[s]->isEnable()
- && pEqLoadPort[s]->getPortType() == PortType::Unloading
- && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
- m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType);
+ if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
+ && pLoadPorts[s]->getPortType() == PortType::Unloading
+ && pLoadPorts[s]->getPortMode() == PortMode::ReadyToUnload) {
+ m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
goto PORT_PUT;
}
@@ -570,6 +573,25 @@
LOGI("创建新任务<%s>...", strDescription.c_str());
continue;
}
+
+
+ // Measurement NG -> LoadPort
+ // NG回原位
+ if (!rmd.armState[1]) {
+ m_pActiveRobotTask = createTransferTask_restore(pMeasurement, pLoadPorts);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->pick();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建Measurement回退任务<%s>...", strDescription.c_str());
+ continue;
+ }
+ }
+
+
// BakeCooling ->Measurement
@@ -725,12 +747,30 @@
}
}
+ // Aligner -> LoadPort
+ if (!rmd.armState[1]) {
+ m_pActiveRobotTask = createTransferTask_restore(pAligner, pLoadPorts);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->pick();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建Aligner回退任务<%s>...", strDescription.c_str());
+ continue;
+ }
+ }
+
+
+
+
// LoadPort -> Aligner
for (int s = 0; s < 4; s++) {
- if (!rmd.armState[0] && pEqLoadPort[s]->isEnable()
- && pEqLoadPort[s]->getPortType() == PortType::Loading
- && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
- m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pAligner, primaryType, secondaryType);
+ if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
+ && pLoadPorts[s]->getPortType() == PortType::Loading
+ && pLoadPorts[s]->getPortMode() == PortMode::ReadyToLoad) {
+ m_pActiveRobotTask = createTransferTask(pLoadPorts[s], pAligner, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
pEFEM->setContext(m_pActiveRobotTask->getContext());
goto PORT_GET;
@@ -777,11 +817,12 @@
for (auto item : m_listEquipment) {
const StationIdentifier& station = item->getStation();
MemoryBlock& block = item->getReadBitBlock();
-
- int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
- block.start, block.size, block.buffer);
- if (0 == nRet) {
- item->onReceiveLBData(block.buffer, block.size);
+ if (block.end > block.start) {
+ int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
+ block.start, block.size, block.buffer);
+ if (0 == nRet) {
+ item->onReceiveLBData(block.buffer, block.size);
+ }
}
}
}
@@ -822,7 +863,7 @@
m_listener.onEqVcrEventReport(this, p, p2);
}
};
- listener.onPreFethedOutJob = [&](void* pEquipment, CJobDataB* pJobDataB) -> BOOL {
+ listener.onPreFethedOutJob = [&](void* pEquipment, int port, CJobDataB* pJobDataB) -> BOOL {
CEquipment* p = (CEquipment*)pEquipment;
@@ -855,7 +896,7 @@
return bOk;
};
- listener.onPreStoredJob = [&](void* pEquipment, CJobDataB* pJobDataB, short& slot) -> BOOL {
+ listener.onPreStoredJob = [&](void* pEquipment, int port, CJobDataB* pJobDataB, short& slot) -> BOOL {
CEquipment* p = (CEquipment*)pEquipment;
@@ -887,7 +928,7 @@
else if (m_pActiveRobotTask->isRestoring() &&
m_pActiveRobotTask->getSrcPosition() == p->getID()) {
CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getSrcSlot());
- if (pGlass == nullptr) {
+ if (pGlass == nullptr && m_pActiveRobotTask->getSrcSlot() == port) {
bOk = TRUE;
slot = m_pActiveRobotTask->getSrcSlot();
LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
@@ -972,6 +1013,16 @@
listener.onProcessStateChanged = [&](void* pEquipment, PROCESS_STATE state) -> void {
LOGI("<Master>onProcessStateChanged<%d>", (int)state);
};
+ listener.onMapMismatch = [&](void* pEquipment, short scanMap, short downMap) {
+ LOGE("<Master-%s>Port InUse, map(%d!=%d)不一致，请检查。",
+ ((CEquipment*)pEquipment)->getName().c_str(), scanMap, downMap);
+ };
+ listener.onPortInUse = [&](void* pEquipment, short scanMap) {
+ LOGE("<Master-%s>Port InUse。scanMap=%d", ((CEquipment*)pEquipment)->getName().c_str(), scanMap);
+ if (m_listener.onLoadPortInUse != nullptr) {
+ m_listener.onLoadPortInUse(this, (CEquipment*)pEquipment, scanMap);
+ }
+ };
pEquipment->setListener(listener);
pEquipment->setCcLink(&m_cclink);
m_listEquipment.push_back(pEquipment);
@@ -1009,6 +1060,7 @@
pEquipment->setID(EQ_ID_LOADPORT1 + index);
pEquipment->setName(szName);
pEquipment->setDescription(szName);
+ pEquipment->setCompareMapsBeforeProceeding(m_isCompareMapsBeforeProceeding);
addToEquipmentList(pEquipment);
@@ -1026,7 +1078,7 @@
pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
pEquipment->setName("Fliper(G2)");
pEquipment->setDescription("Fliper(G2).");
- pEquipment->setReadBitBlock(0x4000, 0x45ff);
+ pEquipment->setReadBitBlock(0x0, 0x0);
pEquipment->setStation(0, 255);
addToEquipmentList(pEquipment);
@@ -1061,7 +1113,7 @@
pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
pEquipment->setName("Aligner");
pEquipment->setDescription("Aligner.");
- pEquipment->setReadBitBlock(0x4000, 0x45ff);
+ pEquipment->setReadBitBlock(0x0, 0x0);
pEquipment->setStation(0, 255);
addToEquipmentList(pEquipment);
@@ -1188,27 +1240,8 @@
}
- // 按一定频率扫描LB数据
static int i = 0;
i++;
- /*
- if (i % (4 * 1) == 0) {
-
- for (auto item : m_listEquipment) {
- if (item->getID() == EQ_ID_Bonder1) {
- const StationIdentifier& station = item->getStation();
- MemoryBlock& block = item->getReadBitBlock();
-
- int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
- block.start, block.size, block.buffer);
- if (0 == nRet) {
- item->onReceiveLBData(block.buffer, block.size);
- }
- }
- }
- }
- */
-
// 自动保存缓存
if (i % (4 * 2) == 0) {
@@ -1384,6 +1417,10 @@
MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
int armNo/* = 1*/)
{
+ if (!pSrcEq->IsEnabled()) {
+ return nullptr;
+ }
+
CRobotTask* pTask = nullptr;
CSlot* pSrcSlot, * pTarSlot;
pTarSlot = pTarEq->getAvailableSlotForGlass(primaryType);
@@ -1408,7 +1445,11 @@
CRobotTask* CMaster::createTransferTask_bonder_to_bakecooling(CEquipment* pSrcEq, CEquipment* pTarEq)
{
- std::vector<int> slots = {1, 2};
+ if (!pSrcEq->IsEnabled()) {
+ return nullptr;
+ }
+
+ std::vector<int> slots = {1, 3};
CRobotTask* pTask = nullptr;
CSlot* pSrcSlot, * pTarSlot;
@@ -1429,8 +1470,12 @@
CRobotTask* CMaster::createTransferTask_bake_to_cooling(CEquipment* pSrcEq)
{
- std::vector<int> slotsTar = { 3, 4 };
- std::vector<int> slotsSrc = { 1, 2 };
+ if (!pSrcEq->IsEnabled()) {
+ return nullptr;
+ }
+
+ std::vector<int> slotsTar = { 2, 4 };
+ std::vector<int> slotsSrc = { 1, 3 };
CRobotTask* pTask = nullptr;
CSlot* pSrcSlot, * pTarSlot;
@@ -1451,12 +1496,52 @@
CRobotTask* CMaster::createTransferTask_bakecooling_to_measurement(CEquipment* pSrcEq, CEquipment* pTarEq)
{
- std::vector<int> slots = { 3, 4 };
+ if (!pSrcEq->IsEnabled()) {
+ return nullptr;
+ }
+
+ std::vector<int> slots = { 2, 4 };
CRobotTask* pTask = nullptr;
CSlot* pSrcSlot, * pTarSlot;
pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G1);
pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);
+
+ if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ pTask = new CRobotTask();
+ pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ }
+
+
+ return pTask;
+ }
+
+ CRobotTask* CMaster::createTransferTask_restore(CEquipment* pEqSrc, CLoadPort** pPorts)
+ {
+ if (!pEqSrc->IsEnabled()) {
+ return nullptr;
+ }
+
+ CRobotTask* pTask = nullptr;
+ CSlot* pSrcSlot, * pTarSlot = nullptr, * pTempSlot;
+ pSrcSlot = pEqSrc->getInspFailSlot();
+ if (pSrcSlot != nullptr) {
+ CGlass* pGlass = (CGlass*)pSrcSlot->getContext();
+ ASSERT(pGlass);
+ int port, slot;
+ pGlass->getOrginPort(port, slot);
+ pGlass->setInspResult(pPorts[port]->getID(), 0, InspResult::Fail);
+ ASSERT(0 <= port && port < 4);
+ ASSERT(0 <= slot && slot < 8);
+ pTempSlot = pPorts[port]->getSlot(slot);
+ if (pTempSlot->getContext() == nullptr) {
+ pTarSlot = pTempSlot;
+ }
+ }
+
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
@@ -1490,7 +1575,8 @@
unlock();
// 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
- stop();
+ // 25年7月23日后修改为不停止任务
+ // stop();
return 0;
}
@@ -1500,6 +1586,18 @@
lock();
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->restore();
+ }
+ unlock();
+
+
+ return 0;
+ }
+
+ int CMaster::resendCurrentTask()
+ {
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->resend();
}
unlock();
@@ -1520,4 +1618,17 @@
pPort->localSetTransferMode((SERVO::TransferMode)transferMode);
pPort->localAutoChangeEnable(autoChangeEnable);
}
+
+ void CMaster::setPortCassetteType(unsigned int index, SERVO::CassetteType type)
+ {
+ ASSERT(index < 4);
+ int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
+ CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
+ pPort->localSetCessetteType(type);
+ }
+
+ void CMaster::setCompareMapsBeforeProceeding(BOOL bCompare)
+ {
+ m_isCompareMapsBeforeProceeding = bCompare;
+ }
}
--
Gitblit v1.9.3