From 92c468d386d33f5e74916a7afd290e50ce0d5d6f Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期四, 12 六月 2025 11:57:43 +0800
Subject: [PATCH] 1.修改连接图
---
SourceCode/Bond/Servo/CMaster.cpp | 147 ++++++++++++++++++++++++------------------------
1 files changed, 73 insertions(+), 74 deletions(-)
diff --git a/SourceCode/Bond/Servo/CMaster.cpp b/SourceCode/Bond/Servo/CMaster.cpp
index 6a7437a..661f2de 100644
--- a/SourceCode/Bond/Servo/CMaster.cpp
+++ b/SourceCode/Bond/Servo/CMaster.cpp
@@ -284,12 +284,15 @@
// Bonder1和Bonder2需要的G2就过不来了
// 最基本的实现，可以G2和G2轮流搬送，但最好根据Bonder的需求来决定
MaterialsType primaryType, secondaryType;
+ int armNo = 1; // 默认使用手臂2
// 各种机器
CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
+ CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
+ CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
@@ -301,6 +304,8 @@
ASSERT(pEFEM);
ASSERT(pLoadPort1);
ASSERT(pLoadPort2);
+ ASSERT(pLoadPort3);
+ ASSERT(pLoadPort4);
ASSERT(pFliper);
ASSERT(pVacuumBack);
ASSERT(pAligner);
@@ -371,6 +376,37 @@
}
+ // Measurement -> LoadPort
+ CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
+ CEquipment* pEqTar[] = { pVacuumBack, pFliper };
+ if (primaryType == MaterialsType::G2) {
+ pEqTar[0] = pFliper;
+ pEqTar[1] = pVacuumBack;
+ }
+ for (int s = 0; s < 4; s++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Unloading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
+ m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_PUT;
+ }
+ }
+ }
+
+ PORT_PUT:
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+
// BakeCooling ->Measurement
m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
if (m_pActiveRobotTask != nullptr) {
@@ -426,7 +462,7 @@
}
// Aligner -> Bonder
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
@@ -438,7 +474,7 @@
continue;
}
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
@@ -453,7 +489,7 @@
// Fliper(G2) -> Aligner
// VacuumBake(G1) -> Aligner
- m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
@@ -465,7 +501,7 @@
continue;
}
- m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
@@ -480,13 +516,20 @@
// LoadPort -> Fliper(G2)
// LoadPort -> VacuumBake(G1)
- CEquipment* pEqTar1 = pVacuumBack;
- CEquipment* pEqTar2 = pFliper;
- if (primaryType == MaterialsType::G2) {
- pEqTar1 = pFliper;
- pEqTar2 = pVacuumBack;
+ for (int s = 0; s < 4; s++) {
+ for (int t = 0; t < 2; t++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Loading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
+ m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pEqTar[t], primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_GET;
+ }
+ }
+ }
}
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar1, primaryType, secondaryType);
+
+PORT_GET:
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
@@ -497,50 +540,6 @@
LOGI("创建新任务<%s>...", strDescription.c_str());
continue;
}
-
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar1, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
-
-
- // LoadPort -> VacuumBake(G1)
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar2, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar2, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
-
- // Measurement -> LoadPort
-
-
unlock();
@@ -982,42 +981,40 @@
CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
- nRet = pLoadPort1->getPin("Out1")->connectPin(pFliper->getPin("In1"));
+ nRet = pLoadPort1->getPin("Out1")->connectPin(pAligner->getPin("In1"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out1")->connectPin(pFliper->getPin("In2"));
+ nRet = pLoadPort2->getPin("Out1")->connectPin(pAligner->getPin("In2"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort1->getPin("Out2")->connectPin(pVacuumBake->getPin("In1"));
+ nRet = pAligner->getPin("Out1")->connectPin(pFliper->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out2")->connectPin(pVacuumBake->getPin("In2"));
+ nRet = pAligner->getPin("Out2")->connectPin(pVacuumBake->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-VacuumBake失败");
}
- nRet = pFliper->getPin("Out")->connectPin(pAligner->getPin("In1"));
+ nRet = pFliper->getPin("Out1")->connectPin(pBonder1->getPin("In1"));
if (nRet < 0) {
- LOGE("连接Fliper-Aligner失败");
+ LOGE("连接Fliper-Bonder1失败");
+ }
+ nRet = pFliper->getPin("Out2")->connectPin(pBonder2->getPin("In1"));
+ if (nRet < 0) {
+ LOGE("连接Fliper-Bonder2失败");
}
- nRet = pVacuumBake->getPin("Out")->connectPin(pAligner->getPin("In2"));
+ nRet = pVacuumBake->getPin("Out1")->connectPin(pBonder1->getPin("In2"));
if (nRet < 0) {
- LOGE("连接VacuumBake-Aligner失败");
+ LOGE("连接VacuumBake-Bonder1失败");
}
-
- nRet = pAligner->getPin("Out1")->connectPin(pBonder1->getPin("In"));
+ nRet = pVacuumBake->getPin("Out2")->connectPin(pBonder2->getPin("In2"));
if (nRet < 0) {
- LOGE("连接Aligner-Bondere1失败");
- }
-
- nRet = pAligner->getPin("Out2")->connectPin(pBonder2->getPin("In"));
- if (nRet < 0) {
- LOGE("连接Aligner-Bondere2失败");
+ LOGE("连接VacuumBake-Bonder2失败");
}
nRet = pBonder1->getPin("Out")->connectPin(pBakeCooling->getPin("In1"));
@@ -1130,7 +1127,8 @@
static int taskSeqNo = 0;
CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq,
- MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/)
+ MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
+ int armNo/* = 1*/)
{
CRobotTask* pTask = nullptr;
CSlot* pSrcSlot, * pTarSlot;
@@ -1146,7 +1144,7 @@
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTask->setRobotTransferParam(++taskSeqNo, armNo, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1209,6 +1207,7 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
--
Gitblit v1.9.3