From 92c468d386d33f5e74916a7afd290e50ce0d5d6f Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期四, 12 六月 2025 11:57:43 +0800
Subject: [PATCH] 1.修改连接图
---
SourceCode/Bond/Servo/CMaster.cpp | 413 +++++++++++++++++++++++++++++++++++++++++++++++-----------
1 files changed, 331 insertions(+), 82 deletions(-)
diff --git a/SourceCode/Bond/Servo/CMaster.cpp b/SourceCode/Bond/Servo/CMaster.cpp
index d536f7c..661f2de 100644
--- a/SourceCode/Bond/Servo/CMaster.cpp
+++ b/SourceCode/Bond/Servo/CMaster.cpp
@@ -279,6 +279,41 @@
unsigned CMaster::DispatchProc()
{
+ // 优先考虑的类型和次要类型
+ // 一种情况，如果不分主次，一直搬G1, 等到Bonder1和Bonder2都放了G1, Aligner也放了G1,
+ // Bonder1和Bonder2需要的G2就过不来了
+ // 最基本的实现，可以G2和G2轮流搬送，但最好根据Bonder的需求来决定
+ MaterialsType primaryType, secondaryType;
+ int armNo = 1; // 默认使用手臂2
+
+
+ // 各种机器
+ CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
+ CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
+ CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
+ CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
+ CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
+ CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
+ CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
+ CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
+ CBonder* pBonder1 = (CBonder*)getEquipment(EQ_ID_Bonder1);
+ CBonder* pBonder2 = (CBonder*)getEquipment(EQ_ID_Bonder2);
+ CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
+ CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
+
+ ASSERT(pEFEM);
+ ASSERT(pLoadPort1);
+ ASSERT(pLoadPort2);
+ ASSERT(pLoadPort3);
+ ASSERT(pLoadPort4);
+ ASSERT(pFliper);
+ ASSERT(pVacuumBack);
+ ASSERT(pAligner);
+ ASSERT(pBonder1);
+ ASSERT(pBonder2);
+ ASSERT(pBakeCooling);
+ ASSERT(pMeasurement);
+
while (1) {
// 待退出信号或时间到
HANDLE hEvents[] = { m_hEventDispatchThreadExit[0], m_hDispatchEvent };
@@ -310,81 +345,201 @@
// 调度逻辑处理
else if (m_state == MASTERSTATE::RUNNING) {
unlock();
- LOGI("调度处理中...");
+ // LOGI("调度处理中...");
lock();
if (m_pActiveRobotTask != nullptr) {
unlock();
// 检测到当前有正在下午的任务，确保当前任务完成或中止后继续
- LOGI("检测到当前有正在下午的任务，确保当前任务完成或中止后继续...");
- continue;
- }
-
- // LoadPort -> Fliper(G2)
- CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
- CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
- CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
- CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
- ASSERT(pLoadPort1);
- ASSERT(pLoadPort2);
- ASSERT(pFliper);
- ASSERT(pVacuumBack);
-
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pFliper);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pFliper);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- LOGI("创建新任务<%s>...", strDescription.c_str());
+ // LOGI("检测到当前有正在下午的任务，确保当前任务完成或中止后继续...");
continue;
}
-
- // LoadPort -> VacuumBake(G1)
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pVacuumBack);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- LOGI("创建新任务1<%s>...", strDescription.c_str());
- continue;
+ // 此处检测优先类型和次要类型（G1或G2）
+ // 如果其中一Bonder有单个玻璃，优先取它的配对类型，否则无所谓了
+ primaryType = MaterialsType::G1;
+ secondaryType = MaterialsType::G2;
+ if ((!pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
+ && (!pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
+ // 如果G1和G2都满了，那就看Aligner, 如果Aligner有玻璃为G1, 则取G2
+ CGlass* pGlass = pAligner->getGlassFromSlot(1);
+ if (pGlass != nullptr && pGlass->getType() == MaterialsType::G1) {
+ primaryType = MaterialsType::G2;
+ secondaryType = MaterialsType::G1;
+ }
}
-
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pVacuumBack);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- LOGI("创建新任务2<%s>...", strDescription.c_str());
- continue;
+ else if ((pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
+ || (pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
+ primaryType = MaterialsType::G2;
+ secondaryType = MaterialsType::G1;
}
-
-
-
- // Fliper(G2) -> Aligner
-
-
- // VacuumBake(G1) -> Aligner
-
-
- // Aligner -> Bonder
-
-
- // Bonder -> BakeCooling
-
-
- // BakeCooling ->Measurement
// Measurement -> LoadPort
+ CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
+ CEquipment* pEqTar[] = { pVacuumBack, pFliper };
+ if (primaryType == MaterialsType::G2) {
+ pEqTar[0] = pFliper;
+ pEqTar[1] = pVacuumBack;
+ }
+ for (int s = 0; s < 4; s++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Unloading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
+ m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_PUT;
+ }
+ }
+ }
+
+ PORT_PUT:
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+ // BakeCooling ->Measurement
+ m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+
+ // BakeCooling内部
+ // Bake -> Cooling
+ m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+
+ // Bonder -> BakeCooling
+ m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ // Aligner -> Bonder
+ m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+
+ // Fliper(G2) -> Aligner
+ // VacuumBake(G1) -> Aligner
+ m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+
+ // LoadPort -> Fliper(G2)
+ // LoadPort -> VacuumBake(G1)
+ for (int s = 0; s < 4; s++) {
+ for (int t = 0; t < 2; t++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Loading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
+ m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pEqTar[t], primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_GET;
+ }
+ }
+ }
+ }
+
+PORT_GET:
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
unlock();
@@ -409,6 +564,7 @@
break;
}
+ // 读标志位
for (auto item : m_listEquipment) {
if (item->getID() == EQ_ID_Bonder1 ||
item->getID() == EQ_ID_Bonder2) {
@@ -552,6 +708,9 @@
lock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_FINISH);
+ }
delete m_pActiveRobotTask;
m_pActiveRobotTask = nullptr;
}
@@ -822,42 +981,40 @@
CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
- nRet = pLoadPort1->getPin("Out1")->connectPin(pFliper->getPin("In1"));
+ nRet = pLoadPort1->getPin("Out1")->connectPin(pAligner->getPin("In1"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out1")->connectPin(pFliper->getPin("In2"));
+ nRet = pLoadPort2->getPin("Out1")->connectPin(pAligner->getPin("In2"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort1->getPin("Out2")->connectPin(pVacuumBake->getPin("In1"));
+ nRet = pAligner->getPin("Out1")->connectPin(pFliper->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out2")->connectPin(pVacuumBake->getPin("In2"));
+ nRet = pAligner->getPin("Out2")->connectPin(pVacuumBake->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-VacuumBake失败");
}
- nRet = pFliper->getPin("Out")->connectPin(pAligner->getPin("In1"));
+ nRet = pFliper->getPin("Out1")->connectPin(pBonder1->getPin("In1"));
if (nRet < 0) {
- LOGE("连接Fliper-Aligner失败");
+ LOGE("连接Fliper-Bonder1失败");
+ }
+ nRet = pFliper->getPin("Out2")->connectPin(pBonder2->getPin("In1"));
+ if (nRet < 0) {
+ LOGE("连接Fliper-Bonder2失败");
}
- nRet = pVacuumBake->getPin("Out")->connectPin(pAligner->getPin("In2"));
+ nRet = pVacuumBake->getPin("Out1")->connectPin(pBonder1->getPin("In2"));
if (nRet < 0) {
- LOGE("连接VacuumBake-Aligner失败");
+ LOGE("连接VacuumBake-Bonder1失败");
}
-
- nRet = pAligner->getPin("Out1")->connectPin(pBonder1->getPin("In"));
+ nRet = pVacuumBake->getPin("Out2")->connectPin(pBonder2->getPin("In2"));
if (nRet < 0) {
- LOGE("连接Aligner-Bondere1失败");
- }
-
- nRet = pAligner->getPin("Out2")->connectPin(pBonder2->getPin("In"));
- if (nRet < 0) {
- LOGE("连接Aligner-Bondere2失败");
+ LOGE("连接VacuumBake-Bonder2失败");
}
nRet = pBonder1->getPin("Out")->connectPin(pBakeCooling->getPin("In1"));
@@ -969,21 +1126,45 @@
}
static int taskSeqNo = 0;
- CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq)
+ CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq,
+ MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
+ int armNo/* = 1*/)
{
CRobotTask* pTask = nullptr;
CSlot* pSrcSlot, * pTarSlot;
- pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G1);
- pSrcSlot = pSrcEq->getNonEmptySlot(MaterialsType::G1);
+ pTarSlot = pTarEq->getAvailableSlotForGlass(primaryType);
+ pSrcSlot = pSrcEq->getProcessedSlot(primaryType);
if (pSrcSlot == nullptr || nullptr == pTarSlot) {
- pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G2);
- pSrcSlot = pSrcEq->getNonEmptySlot(MaterialsType::G2);
+ pTarSlot = pTarEq->getAvailableSlotForGlass(secondaryType);
+ pSrcSlot = pSrcEq->getProcessedSlot(secondaryType);
}
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ pTask->setRobotTransferParam(++taskSeqNo, armNo, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ }
+
+
+ return pTask;
+ }
+
+ CRobotTask* CMaster::createTransferTask_bonder_to_bakecooling(CEquipment* pSrcEq, CEquipment* pTarEq)
+ {
+ std::vector<int> slots = {1, 2};
+
+ CRobotTask* pTask = nullptr;
+ CSlot* pSrcSlot, * pTarSlot;
+ pTarSlot = pTarEq->getAvailableSlotForGlass2(MaterialsType::G1, slots);
+ pSrcSlot = pSrcEq->getProcessedSlot(MaterialsType::G1);
+
+ if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ pTask = new CRobotTask();
+ pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -991,4 +1172,72 @@
return pTask;
}
+
+ CRobotTask* CMaster::createTransferTask_bake_to_cooling(CEquipment* pSrcEq)
+ {
+ std::vector<int> slotsTar = { 3, 4 };
+ std::vector<int> slotsSrc = { 1, 2 };
+
+ CRobotTask* pTask = nullptr;
+ CSlot* pSrcSlot, * pTarSlot;
+ pTarSlot = pSrcEq->getAvailableSlotForGlass2(MaterialsType::G1, slotsTar);
+ pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slotsSrc);
+
+ if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ pTask = new CRobotTask();
+ pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ }
+
+
+ return pTask;
+ }
+
+ CRobotTask* CMaster::createTransferTask_bakecooling_to_measurement(CEquipment* pSrcEq, CEquipment* pTarEq)
+ {
+ std::vector<int> slots = { 3, 4 };
+
+ CRobotTask* pTask = nullptr;
+ CSlot* pSrcSlot, * pTarSlot;
+ pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G1);
+ pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);
+
+ if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ pTask = new CRobotTask();
+ pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ }
+
+
+ return pTask;
+ }
+
+ int CMaster::abortCurrentTask()
+ {
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->abort();
+ }
+ unlock();
+
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_ABORT);
+ }
+
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ delete m_pActiveRobotTask;
+ m_pActiveRobotTask = nullptr;
+ }
+ unlock();
+
+ // 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
+ stop();
+
+ return 0;
+ }
}
--
Gitblit v1.9.3