From 817d91396abc1cca6f1ef5abb1fd5fbfd3511268 Mon Sep 17 00:00:00 2001
From: mrDarker <mr.darker@163.com>
Date: 星期一, 16 六月 2025 10:47:07 +0800
Subject: [PATCH] 1. 通信地址修改 2. 修复设置Port时，只添加了Port1 3. 搬运测试界面优化
---
SourceCode/Bond/Servo/CMaster.cpp | 208 ++++++++++++++++++++++++++++++++++++----------------
1 files changed, 144 insertions(+), 64 deletions(-)
diff --git a/SourceCode/Bond/Servo/CMaster.cpp b/SourceCode/Bond/Servo/CMaster.cpp
index a73e03c..d25da2b 100644
--- a/SourceCode/Bond/Servo/CMaster.cpp
+++ b/SourceCode/Bond/Servo/CMaster.cpp
@@ -160,9 +160,9 @@
ASSERT(pMeasurement);
pEfem->setPort(0, pPort1);
- pEfem->setPort(1, pPort1);
- pEfem->setPort(2, pPort1);
- pEfem->setPort(3, pPort1);
+ pEfem->setPort(1, pPort2);
+ pEfem->setPort(2, pPort3);
+ pEfem->setPort(3, pPort4);
pEfem->setFliper(pFliper);
pEfem->setAligner(pAligner);
pEfem->setArmTray(0, pArmTray1);
@@ -287,23 +287,31 @@
// 各种机器
+ CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
+ CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
+ CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
CBonder* pBonder1 = (CBonder*)getEquipment(EQ_ID_Bonder1);
CBonder* pBonder2 = (CBonder*)getEquipment(EQ_ID_Bonder2);
CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
+ CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
+ ASSERT(pEFEM);
ASSERT(pLoadPort1);
ASSERT(pLoadPort2);
+ ASSERT(pLoadPort3);
+ ASSERT(pLoadPort4);
ASSERT(pFliper);
ASSERT(pVacuumBack);
ASSERT(pAligner);
ASSERT(pBonder1);
ASSERT(pBonder2);
ASSERT(pBakeCooling);
+ ASSERT(pMeasurement);
while (1) {
// 待退出信号或时间到
@@ -367,11 +375,56 @@
}
+ // Measurement -> LoadPort
+ CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
+ CEquipment* pEqTar[] = { pVacuumBack, pFliper };
+ if (primaryType == MaterialsType::G2) {
+ pEqTar[0] = pFliper;
+ pEqTar[1] = pVacuumBack;
+ }
+ for (int s = 0; s < 4; s++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Unloading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
+ m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_PUT;
+ }
+ }
+ }
+ PORT_PUT:
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+
+ // BakeCooling ->Measurement
+ m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+
// BakeCooling内部
// Bake -> Cooling
m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -385,6 +438,7 @@
// Bonder -> BakeCooling
m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -396,6 +450,7 @@
m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -408,6 +463,7 @@
// Aligner -> Bonder
m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -419,6 +475,7 @@
m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -433,6 +490,7 @@
// VacuumBake(G1) -> Aligner
m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -444,6 +502,7 @@
m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -456,14 +515,22 @@
// LoadPort -> Fliper(G2)
// LoadPort -> VacuumBake(G1)
- CEquipment* pEqTar1 = pVacuumBack;
- CEquipment* pEqTar2 = pFliper;
- if (primaryType == MaterialsType::G2) {
- pEqTar1 = pFliper;
- pEqTar2 = pVacuumBack;
+ for (int s = 0; s < 4; s++) {
+ for (int t = 0; t < 2; t++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Loading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
+ m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pEqTar[t], primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_GET;
+ }
+ }
+ }
}
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar1, primaryType, secondaryType);
+
+PORT_GET:
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -472,50 +539,6 @@
LOGI("创建新任务<%s>...", strDescription.c_str());
continue;
}
-
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar1, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
-
-
- // LoadPort -> VacuumBake(G1)
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar2, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar2, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
-
- // BakeCooling ->Measurement
-
-
- // Measurement -> LoadPort
-
-
unlock();
@@ -542,16 +565,24 @@
// 读标志位
for (auto item : m_listEquipment) {
- if (item->getID() == EQ_ID_Bonder1 ||
- item->getID() == EQ_ID_Bonder2) {
- const StationIdentifier& station = item->getStation();
- MemoryBlock& block = item->getReadBitBlock();
+ //if (item->getID() == EQ_ID_Bonder1 ||
+ // item->getID() == EQ_ID_Bonder2) {
+ // const StationIdentifier& station = item->getStation();
+ // MemoryBlock& block = item->getReadBitBlock();
- int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
- block.start, block.size, block.buffer);
- if (0 == nRet) {
- item->onReceiveLBData(block.buffer, block.size);
- }
+ // int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
+ // block.start, block.size, block.buffer);
+ // if (0 == nRet) {
+ // item->onReceiveLBData(block.buffer, block.size);
+ // }
+ //}
+ const StationIdentifier& station = item->getStation();
+ MemoryBlock& block = item->getReadBitBlock();
+
+ int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
+ block.start, block.size, block.buffer);
+ if (0 == nRet) {
+ item->onReceiveLBData(block.buffer, block.size);
}
}
}
@@ -765,7 +796,7 @@
pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
pEquipment->setName("VacuumBake(G1)");
pEquipment->setDescription("VacuumBake(G1).");
- pEquipment->setReadBitBlock(0x4000, 0x45ff);
+ pEquipment->setReadBitBlock(0x5c00, 0x66ff);
pEquipment->setStation(0, 255);
addToEquipmentList(pEquipment);
@@ -876,7 +907,7 @@
pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
pEquipment->setName("BakeCooling");
pEquipment->setDescription("BakeCooling.");
- pEquipment->setReadBitBlock(0x4000, 0x45ff);
+ pEquipment->setReadBitBlock(0x5100, 0x5bff);
pEquipment->setStation(0, 255);
addToEquipmentList(pEquipment);
@@ -1120,6 +1151,7 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1140,6 +1172,7 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1161,6 +1194,7 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1168,4 +1202,50 @@
return pTask;
}
+
+ CRobotTask* CMaster::createTransferTask_bakecooling_to_measurement(CEquipment* pSrcEq, CEquipment* pTarEq)
+ {
+ std::vector<int> slots = { 3, 4 };
+
+ CRobotTask* pTask = nullptr;
+ CSlot* pSrcSlot, * pTarSlot;
+ pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G1);
+ pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);
+
+ if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ pTask = new CRobotTask();
+ pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ }
+
+
+ return pTask;
+ }
+
+ int CMaster::abortCurrentTask()
+ {
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->abort();
+ }
+ unlock();
+
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_ABORT);
+ }
+
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ delete m_pActiveRobotTask;
+ m_pActiveRobotTask = nullptr;
+ }
+ unlock();
+
+ // 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
+ stop();
+
+ return 0;
+ }
}
--
Gitblit v1.9.3