From 7f55a7c6cef156e553866d0012464e4697cb1849 Mon Sep 17 00:00:00 2001
From: mrDarker <mr.darker@163.com>
Date: 星期五, 20 六月 2025 16:27:04 +0800
Subject: [PATCH] 1.联调，优化。
---
SourceCode/Bond/Servo/CMaster.cpp | 291 +++++++++++++++++++++++++++++++++++++++-------------------
1 files changed, 195 insertions(+), 96 deletions(-)
diff --git a/SourceCode/Bond/Servo/CMaster.cpp b/SourceCode/Bond/Servo/CMaster.cpp
index 79da60d..84d09f9 100644
--- a/SourceCode/Bond/Servo/CMaster.cpp
+++ b/SourceCode/Bond/Servo/CMaster.cpp
@@ -1,6 +1,8 @@
#include "stdafx.h"
#include "Common.h"
#include "CMaster.h"
+#include <future>
+#include <vector>
namespace SERVO {
@@ -48,6 +50,7 @@
m_ullRunTime = 0;
m_state = MASTERSTATE::READY;
m_pActiveRobotTask = nullptr;
+ m_nLastError = 0;
InitializeCriticalSection(&m_criticalSection);
}
@@ -160,9 +163,9 @@
ASSERT(pMeasurement);
pEfem->setPort(0, pPort1);
- pEfem->setPort(1, pPort1);
- pEfem->setPort(2, pPort1);
- pEfem->setPort(3, pPort1);
+ pEfem->setPort(1, pPort2);
+ pEfem->setPort(2, pPort3);
+ pEfem->setPort(3, pPort4);
pEfem->setFliper(pFliper);
pEfem->setAligner(pAligner);
pEfem->setArmTray(0, pArmTray1);
@@ -264,6 +267,13 @@
return 0;
}
+ void CMaster::clearError()
+ {
+ m_nLastError = 0;
+ m_strLastError = "";
+ setState(MASTERSTATE::READY);
+ }
+
ULONGLONG CMaster::getRunTime()
{
if (m_state == MASTERSTATE::RUNNING)
@@ -325,8 +335,114 @@
// 如果状态为STARTING，开始工作并切换到RUNNING状态
lock();
if (m_state == MASTERSTATE::STARTING) {
+ // 发送indexerOperationModeChange到各个机台，成功后切换到RUNNING状态
+ // 否则切换到MSERROR状态
+ int nRet;
+ CEquipment* pEq[6] = { pEFEM, pBonder1, pBonder2, pBakeCooling,
+ pVacuumBake, pMeasurement};
+ BOOL bIomcOk[7] = {FALSE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE};
+ std::vector<std::promise<void>> promises(6);
+ std::vector<std::future<void>> futures;
+
+ nRet = pEq[0]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
+ [&](int writeCode, int retCode) -> void {
+ bIomcOk[0] = retCode == (int)RET::OK;
+ promises[0].set_value();
+ TRACE("a0001\n", writeCode, retCode);
+ });
+ if (nRet != 0) {
+ LOGI("<Master>EFEM切换Start状态失败");
+ m_strLastError = "EFEM切换Start状态失败.";
+ goto WAIT;
+ }
+ futures.push_back(promises[0].get_future());
+ /*
+ nRet = pEq[1]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
+ [&](int writeCode, int retCode) -> void {
+ bIomcOk[1] = retCode == (int)RET::OK;
+ promises[1].set_value();
+ TRACE("a0002\n");
+ });
+ if (nRet != 0) {
+ LOGI("<Master>Bonder1切换Start状态失败");
+ m_strLastError = "Bonder1切换Start状态失败.";
+ goto WAIT;
+ }
+ futures.push_back(promises[1].get_future());
+
+ nRet = pEq[2]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
+ [&](int writeCode, int retCode) -> void {
+ bIomcOk[2] = retCode == (int)RET::OK;
+ promises[2].set_value();
+ TRACE("a0003\n");
+ });
+ if (nRet != 0) {
+ LOGI("<Master>Bonder2切换Start状态失败");
+ m_strLastError = "Bonder2切换Start状态失败.";
+ goto WAIT;
+ }
+ futures.push_back(promises[2].get_future());
+
+ nRet = pEq[3]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
+ [&](int writeCode, int retCode) -> void {
+ bIomcOk[3] = retCode == (int)RET::OK;
+ promises[3].set_value();
+ TRACE("a0004\n");
+ });
+ if (nRet != 0) {
+ LOGI("<Master>BakeCooling切换Start状态失败");
+ m_strLastError = "BakeCooling切换Start状态失败.";
+ goto WAIT;
+ }
+ futures.push_back(promises[3].get_future());
+
+ nRet = pEq[4]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
+ [&](int writeCode, int retCode) -> void {
+ bIomcOk[4] = retCode == (int)RET::OK;
+ promises[4].set_value();
+ TRACE("a0005\n");
+ });
+ if (nRet != 0) {
+ LOGI("<Master>VacuumBake切换Start状态失败");
+ m_strLastError = "VacuumBake切换Start状态失败.";
+ goto WAIT;
+ }
+ futures.push_back(promises[4].get_future());
+
+ nRet = pEq[5]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
+ [&](int writeCode, int retCode) -> void {
+ bIomcOk[5] = retCode == (int)RET::OK;
+ promises[5].set_value();
+ TRACE("a0006\n");
+ });
+ if (nRet != 0) {
+ LOGI("<Master>Measurement切换Start状态失败");
+ m_strLastError = "Measurement切换Start状态失败.";
+ goto WAIT;
+ }
+ futures.push_back(promises[5].get_future());
+ */
+
+WAIT:
+ for (auto& f : futures) {
+ f.wait(); // 阻塞等待对应设备完成
+ }
+ for (int i = 0; i < 6; i++) {
+ if (!bIomcOk[i]) {
+ bIomcOk[6] = FALSE;
+ LOGI("<Master>%s切换Start状态失败", pEq[i]->getName().c_str());
+ }
+ }
+
+ // 检查看是否都已经切换到START状态
+ if (!bIomcOk[6]) {
+ unlock();
+ setState(MASTERSTATE::MSERROR);
+ continue;
+ }
+
+
unlock();
- Sleep(1000);
setState(MASTERSTATE::RUNNING);
continue;
}
@@ -335,7 +451,49 @@
// 处理完成当前事务后，切换到停止或就绪状态
else if (m_state == MASTERSTATE::STOPPING) {
unlock();
- Sleep(1000);
+ LOGI("<Master>开始切换各设备到 Stop 模式...");
+
+ std::vector<std::promise<void>> promises(6);
+ std::vector<std::future<void>> futures;
+ BOOL bIomcOk[7] = { FALSE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE };
+
+ int nRet;
+ CEquipment* pEq[6] = { pEFEM, pBonder1, pBonder2, pBakeCooling,
+ pVacuumBake, pMeasurement };
+
+ for (int i = 0; i < 1; ++i) {
+ nRet = pEq[i]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Stop,
+ [i, &promises, &bIomcOk](int writeCode, int retCode) -> void {
+ bIomcOk[i] = retCode == (int)RET::OK;
+ promises[i].set_value();
+ TRACE("s000%d: ret=%d\n", i + 1, retCode);
+ });
+ if (nRet != 0) {
+ LOGI("<Master>%s切换Stop状态发送失败", pEq[i]->getName().c_str());
+ m_strLastError = pEq[i]->getName() + "切换Stop状态发送失败.";
+ bIomcOk[i] = FALSE;
+ promises[i].set_value(); // 避免 wait 阻塞
+ }
+ futures.push_back(promises[i].get_future());
+ }
+
+ for (auto& f : futures) {
+ f.wait(); // 等待所有完成
+ }
+
+ for (int i = 0; i < 6; ++i) {
+ if (!bIomcOk[i]) {
+ bIomcOk[6] = FALSE;
+ LOGI("<Master>%s切换Stop状态失败", pEq[i]->getName().c_str());
+ }
+ }
+
+ if (!bIomcOk[6]) {
+ setState(MASTERSTATE::MSERROR);
+ continue;
+ }
+
+ LOGI("<Master>所有设备成功切换到 Stop 模式");
setState(MASTERSTATE::READY);
continue;
}
@@ -351,6 +509,9 @@
}
if (m_pActiveRobotTask != nullptr) {
+ if (m_pActiveRobotTask->isPicked()) {
+ m_pActiveRobotTask->place();
+ }
unlock();
// 检测到当前有正在下午的任务，确保当前任务完成或中止后继续
// LOGI("检测到当前有正在下午的任务，确保当前任务完成或中止后继续...");
@@ -477,7 +638,7 @@
// Fliper(G2) -> Bonder
// VacuumBake(G1) -> Bonder
- if (!rmd.armState[1]) {
+ if (!rmd.armState[1] && !pBonder1->hasBondClass()) {
m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->pick();
@@ -491,7 +652,7 @@
}
}
- if (!rmd.armState[1]) {
+ if (!rmd.armState[1] && !pBonder2->hasBondClass()) {
m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->pick();
@@ -505,7 +666,7 @@
}
}
- if (!rmd.armState[0]) {
+ if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->pick();
@@ -519,7 +680,7 @@
}
}
- if (!rmd.armState[0]) {
+ if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->pick();
@@ -571,6 +732,7 @@
&& pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pAligner, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
+ pEFEM->setContext(m_pActiveRobotTask->getContext());
goto PORT_GET;
}
}
@@ -613,16 +775,13 @@
// 读标志位
for (auto item : m_listEquipment) {
- if (item->getID() == EQ_ID_Bonder1 ||
- item->getID() == EQ_ID_Bonder2) {
- const StationIdentifier& station = item->getStation();
- MemoryBlock& block = item->getReadBitBlock();
+ const StationIdentifier& station = item->getStation();
+ MemoryBlock& block = item->getReadBitBlock();
- int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
- block.start, block.size, block.buffer);
- if (0 == nRet) {
- item->onReceiveLBData(block.buffer, block.size);
- }
+ int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
+ block.start, block.size, block.buffer);
+ if (0 == nRet) {
+ item->onReceiveLBData(block.buffer, block.size);
}
}
}
@@ -674,10 +833,10 @@
if (m_pActiveRobotTask->getSrcPosition() == p->getID()) {
CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getSrcSlot());
if (pGlass != nullptr) {
- CJobDataB* pJobDataBSrc = pGlass->getJobDataB();
- if (pJobDataBSrc != nullptr
- && pJobDataBSrc->getCassetteSequenceNo() == pJobDataB->getCassetteSequenceNo()
- && pJobDataBSrc->getJobSequenceNo() == pJobDataB->getJobSequenceNo()) {
+ CJobDataS* pJobDataS = pGlass->getJobDataS();
+ if (pJobDataS != nullptr
+ && pJobDataS->getCassetteSequenceNo() == pJobDataB->getCassetteSequenceNo()
+ && pJobDataS->getJobSequenceNo() == pJobDataB->getJobSequenceNo()) {
bOk = TRUE;
LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
}
@@ -757,7 +916,7 @@
) {
LOGI("取片完成.");
m_pActiveRobotTask->fetchOut();
- m_pActiveRobotTask->place();
+ m_pActiveRobotTask->picked();
}
else if (m_pActiveRobotTask != nullptr
@@ -780,7 +939,9 @@
unlock();
}
};
-
+ listener.onProcessStateChanged = [&](void* pEquipment, PROCESS_STATE state) -> void {
+ LOGI("<Master>onProcessStateChanged<%d>", (int)state);
+ };
pEquipment->setListener(listener);
pEquipment->setCcLink(&m_cclink);
m_listEquipment.push_back(pEquipment);
@@ -852,7 +1013,7 @@
pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
pEquipment->setName("VacuumBake(G1)");
pEquipment->setDescription("VacuumBake(G1).");
- pEquipment->setReadBitBlock(0x4000, 0x45ff);
+ pEquipment->setReadBitBlock(0x5c00, 0x66ff);
pEquipment->setStation(0, 255);
addToEquipmentList(pEquipment);
@@ -963,7 +1124,7 @@
pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
pEquipment->setName("BakeCooling");
pEquipment->setDescription("BakeCooling.");
- pEquipment->setReadBitBlock(0x4000, 0x45ff);
+ pEquipment->setReadBitBlock(0x5100, 0x5bff);
pEquipment->setStation(0, 255);
addToEquipmentList(pEquipment);
@@ -1204,14 +1365,11 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
- int srcPos, srcSlot, tarPos, tarSlot;
- transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
- transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, armNo, srcPos,
- tarPos, srcSlot, tarSlot);
+ taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, armNo, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1228,14 +1386,11 @@
pSrcSlot = pSrcEq->getProcessedSlot(MaterialsType::G1);
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
- int srcPos, srcSlot, tarPos, tarSlot;
- transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
- transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, srcPos,
- tarPos, srcSlot, tarSlot);
+ taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1253,14 +1408,11 @@
pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slotsSrc);
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
- int srcPos, srcSlot, tarPos, tarSlot;
- transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
- transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, srcPos,
- tarPos, srcSlot, tarSlot);
+ taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1277,68 +1429,15 @@
pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
- int srcPos, srcSlot, tarPos, tarSlot;
- transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
- transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, srcPos,
- tarPos, srcSlot, tarSlot);
+ taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
return pTask;
- }
-
- void CMaster::transformPosAndSlot(int srcPos, int srcSlot, int& tarPos, int& tarSlot)
- {
- switch (srcPos)
- {
- case EQ_ID_LOADPORT1:
- case EQ_ID_LOADPORT2:
- case EQ_ID_LOADPORT3:
- case EQ_ID_LOADPORT4:
- case EQ_ID_ARM_TRAY1:
- case EQ_ID_ARM_TRAY2:
- case EQ_ID_ALIGNER:
- case EQ_ID_FLIPER:
- tarPos = srcPos;
- tarSlot = 1;
- break;
- case EQ_ID_Bonder1:
- if (1 <= srcSlot && srcSlot <= 2) {
- tarPos = 9 + srcSlot;
- tarSlot = 1;
- }
- break;
- case EQ_ID_Bonder2:
- if (1 <= srcSlot && srcSlot <= 2) {
- tarPos = 11 + srcSlot;
- tarSlot = 1;
- }
- break;
- case EQ_ID_VACUUMBAKE:
- if (1 <= srcSlot && srcSlot <= 2) {
- tarPos = 13 + srcSlot;
- tarSlot = 1;
- }
- break;
- case EQ_ID_BAKE_COOLING:
- if (1 <= srcSlot && srcSlot <= 4) {
- tarPos = 15 + srcSlot;
- tarSlot = 1;
- }
- break;
- case EQ_ID_MEASUREMENT:
- tarPos = 19;
- tarSlot = 1;
- break;
- default:
- tarPos = srcPos;
- tarSlot = srcSlot;
- break;
- }
}
int CMaster::abortCurrentTask()
--
Gitblit v1.9.3