From 74401edd0fb47294538d7253ad15e6a8d3d1fc5a Mon Sep 17 00:00:00 2001
From: mrDarker <mr.darker@163.com>
Date: 星期五, 27 六月 2025 09:00:43 +0800
Subject: [PATCH] 1. 防止定时器重复刷新手臂的状态 2. 手臂显示的位置通过配置文件读取
---
SourceCode/Bond/Servo/Common.h | 48 +++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 47 insertions(+), 1 deletions(-)
diff --git a/SourceCode/Bond/Servo/Common.h b/SourceCode/Bond/Servo/Common.h
index 913285f..21fe6c9 100644
--- a/SourceCode/Bond/Servo/Common.h
+++ b/SourceCode/Bond/Servo/Common.h
@@ -34,6 +34,7 @@
#define PAGE_GRPAH2_BACKGROUND_COLOR RGB(255, 255, 255)
#define EQ_BOX_OFFLINE RGB(222, 222, 222)
#define EQ_BOX_ONLINE RGB(0, 176, 80)
+#define EQ_BOX_OCCUPIED RGB(0, 204, 102)
#define EQ_BOX_FRAME1 RGB(22, 22, 22)
#define EQ_BOX_FRAME2 RGB(255, 127, 39)
#define CR_MSGBOX_BKGND RGB(7, 71, 166)
@@ -79,6 +80,49 @@
#define EQ_ID_ARM 101
#define EQ_ID_OPERATOR_REMOVE 102
+/* Equipment Name */
+#define EQ_NAME_LOADPORT1 "LoadPort1"
+#define EQ_NAME_LOADPORT2 "LoadPort2"
+#define EQ_NAME_LOADPORT3 "LoadPort3"
+#define EQ_NAME_LOADPORT4 "LoadPort4"
+#define EQ_NAME_ARM_TRAY1 "ArmTray1"
+#define EQ_NAME_ARM_TRAY2 "ArmTray2"
+#define EQ_NAME_ALIGNER "Aligner"
+#define EQ_NAME_FLIPER "Fliper"
+#define EQ_NAME_VACUUMBAKE "VacuumBake"
+#define EQ_NAME_BONDER1 "Bonder1"
+#define EQ_NAME_BONDER2 "Bonder2"
+#define EQ_NAME_BAKE_COOLING "BakeCooling"
+#define EQ_NAME_MEASUREMENT "Measurement"
+#define EQ_NAME_EFEM "EFEM"
+#define EQ_NAME_ARM "Arm"
+#define EQ_NAME_OPERATOR_REMOVE "OperatorRemove"
+
+// 设备元信息结构体
+struct DeviceMetaInfo {
+ int nDeviceID;
+ const char* strDeviceName; // 指针，仅指向常量字符串
+};
+
+// 全局设备元信息列表
+static const DeviceMetaInfo g_allDeviceMetaInfos[] = {
+ {EQ_ID_LOADPORT1, EQ_NAME_LOADPORT1},
+ {EQ_ID_LOADPORT2, EQ_NAME_LOADPORT2},
+ {EQ_ID_LOADPORT3, EQ_NAME_LOADPORT3},
+ {EQ_ID_LOADPORT4, EQ_NAME_LOADPORT4},
+ {EQ_ID_ARM_TRAY1, EQ_NAME_ARM_TRAY1},
+ {EQ_ID_ARM_TRAY2, EQ_NAME_ARM_TRAY2},
+ {EQ_ID_ALIGNER, EQ_NAME_ALIGNER},
+ {EQ_ID_FLIPER, EQ_NAME_FLIPER},
+ {EQ_ID_VACUUMBAKE, EQ_NAME_VACUUMBAKE},
+ {EQ_ID_Bonder1, EQ_NAME_BONDER1},
+ {EQ_ID_Bonder2, EQ_NAME_BONDER2},
+ {EQ_ID_BAKE_COOLING, EQ_NAME_BAKE_COOLING},
+ {EQ_ID_MEASUREMENT, EQ_NAME_MEASUREMENT},
+ {EQ_ID_EFEM, EQ_NAME_EFEM},
+ {EQ_ID_ARM, EQ_NAME_ARM},
+ {EQ_ID_OPERATOR_REMOVE, EQ_NAME_OPERATOR_REMOVE},
+};
/* step name */
#define STEP_MODE _T("EQMode")
@@ -319,6 +363,7 @@
#define STEP_ID_FETCHED_OUT_JOB_REPORT13 0x5BB
#define STEP_ID_FETCHED_OUT_JOB_REPORT14 0x5BC
#define STEP_ID_FETCHED_OUT_JOB_REPORT15 0x5BD
+#define STEP_ID_JOB_DATA_REQUEST 0x5C1
#define STEP_ID_PANEL_DATA_REQUEST 0x5D0
#define STEP_ID_PANEL_DATA_REPORT 0x5D1
#define STEP_ID_IN_OP_CMD_REPLY 0x5F0
@@ -493,4 +538,5 @@
#define ROBOT_EVENT_CREATE 0 // 新任务创建
#define ROBOT_EVENT_FINISH 1 // 正常完成
#define ROBOT_EVENT_ERROR 2 // 出现错误
-#define ROBOT_EVENT_ABORT 3 // 人为中止
\ No newline at end of file
+#define ROBOT_EVENT_ABORT 3 // 人为中止
+#define ROBOT_EVENT_RESTORE 4 // 回撤
\ No newline at end of file
--
Gitblit v1.9.3