From 625fb6aa20dd6be77a43f45d3c64b9d633417129 Mon Sep 17 00:00:00 2001
From: chenluhua1980 <Chenluhua@qq.com>
Date: 星期五, 23 一月 2026 22:08:08 +0800
Subject: [PATCH] 1.实现了“空腔调机曲线模式/生产曲线模式”的切换逻辑，并在模式切换时启动/停止 DAQBridge 的采样缓存，确保空腔也能推送曲线数据； 2.菜单里新增两个选项并显示勾选状态。
---
SourceCode/Bond/Servo/CRobotTask.cpp | 22 ++++++++++++++++++----
1 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/SourceCode/Bond/Servo/CRobotTask.cpp b/SourceCode/Bond/Servo/CRobotTask.cpp
index b549782..f0e9596 100644
--- a/SourceCode/Bond/Servo/CRobotTask.cpp
+++ b/SourceCode/Bond/Servo/CRobotTask.cpp
@@ -220,7 +220,7 @@
LOGI(_T("RobotTask已下发到EFEM"));
}
else {
- LOGI(_T("RobotTask已下发失败"));
+ LOGE(_T("RobotTask下发失败"));
}
return 0;
@@ -238,7 +238,7 @@
LOGI(_T("RobotTask/get已下发到EFEM"));
}
else {
- LOGI(_T("RobotTask/get已下发失败"));
+ LOGE(_T("RobotTask/get已下发失败"));
}
return 0;
@@ -261,7 +261,7 @@
LOGI(_T("RobotTask/put已下发到EFEM"));
}
else {
- LOGI(_T("RobotTask/put已下发失败"));
+ LOGE(_T("RobotTask/put已下发失败"));
}
return 0;
@@ -279,11 +279,22 @@
LOGI(_T("RobotTask/restore-put已下发到EFEM"));
}
else {
- LOGI(_T("RobotTask/restore-put已下发失败"));
+ LOGE(_T("RobotTask/restore-put已下发失败"));
}
return 0;
});
+ }
+
+ void CRobotTask::resend()
+ {
+ // 重新下发命令，无非是下发取料或下发放料的命令，根据当前状态来
+ if (ROBOT_TASK_STATE::Picking == m_state || ROBOT_TASK_STATE::Picked == m_state) {
+ pick();
+ }
+ else if (ROBOT_TASK_STATE::Placing == m_state) {
+ place();
+ }
}
void CRobotTask::completed()
@@ -359,6 +370,9 @@
case EQ_ID_LOADPORT2:
case EQ_ID_LOADPORT3:
case EQ_ID_LOADPORT4:
+ tarPos = srcPos;
+ tarSlot = srcSlot;
+ break;
case EQ_ID_ARM_TRAY1:
case EQ_ID_ARM_TRAY2:
case EQ_ID_ALIGNER:
--
Gitblit v1.9.3