From 5b6e648814aa829706cb94e6c44766ee9a6d9f12 Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期三, 28 五月 2025 11:06:47 +0800
Subject: [PATCH] 1.机器槽位信息设计（CSlot）
---
SourceCode/Bond/Servo/CBonder.cpp | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 60 insertions(+), 0 deletions(-)
diff --git a/SourceCode/Bond/Servo/CBonder.cpp b/SourceCode/Bond/Servo/CBonder.cpp
index a1a47b1..87f4a7d 100644
--- a/SourceCode/Bond/Servo/CBonder.cpp
+++ b/SourceCode/Bond/Servo/CBonder.cpp
@@ -336,6 +336,21 @@
}
}
+ // 必须要实现的虚函数，在此初始化Slot信息
+ void CBonder::initSlots()
+ {
+ m_slot[0].enable();
+ m_slot[0].setPosition(m_nID);
+ m_slot[0].setNo(1);
+ m_slot[0].setName("Slot 1(G1)");
+ m_slot[0].setType(MaterialsType::G1);
+ m_slot[1].enable();
+ m_slot[1].setPosition(m_nID);
+ m_slot[1].setNo(2);
+ m_slot[1].setName("Slot 2(G2)");
+ m_slot[1].setType(MaterialsType::G2);
+ }
+
void CBonder::onTimer(UINT nTimerid)
{
CEquipment::onTimer(nTimerid);
@@ -408,4 +423,49 @@
return bCheck;
}
+
+ int CBonder::onProcessData(CProcessData* pProcessData)
+ {
+ CEquipment::onProcessData(pProcessData);
+
+
+ // 检查数据，当前两片玻璃，一片为G1, 一片为G2, 且pProcessData中的id能匹配G1或G2
+ Lock();
+ if (m_glassList.size() != 2) {
+ Unlock();
+ LOGE("<CBonder-%s>onProcessData,绑定失败，腔体内必须有且仅有两片玻璃!", m_strName.c_str());
+ return -1;
+ }
+
+ CGlass* pGlass1 = m_glassList.front();
+ CGlass* pGlass2 = m_glassList.back();
+ Unlock();
+
+ if (pGlass1->getBuddy() != nullptr || pGlass2->getBuddy() != nullptr) {
+ LOGE("<CBonder-%s>onProcessData,错误!玻璃较早前已被绑定，请检查数据是否正确!", m_strName.c_str());
+ return -1;
+ }
+
+ if (pGlass1->getBuddy() != nullptr || pGlass2->getBuddy() != nullptr) {
+ LOGE("<CBonder-%s>onProcessData,错误!玻璃较早前已被贴合，请检查数据是否正确!", m_strName.c_str());
+ return -1;
+ }
+
+ if (pGlass1->getType() == pGlass2->getType()) {
+ LOGE("<CBonder-%s>onProcessData,错误!两片玻璃未匹配，必须分别为G1和G2类型，请检查数据是否正确!", m_strName.c_str());
+ return -1;
+ }
+
+ pGlass1->setBuddy(pGlass2);
+ pGlass2->setBuddy(pGlass1);
+ LOGE("<CBonder-%s>onProcessData,%s和%s已贴合!", m_strName.c_str(),
+ pGlass1->getID().c_str(), pGlass2->getID().c_str());
+
+ return 0;
+ }
+
+ int CBonder::getIndexerOperationModeBaseValue()
+ {
+ return m_nIndex == 0 ? 15000 : 20000;
+ }
}
--
Gitblit v1.9.3