From 58c44e7934c94f4a2327252fc017c19b9f802491 Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期五, 06 六月 2025 10:40:02 +0800
Subject: [PATCH] 1.绑定关系的保存和还原； 2.BakeCooling内部搬运检测逻辑(Bake->Cooling)；
---
SourceCode/Bond/Servo/Common.h | 100 +++++++++++++++++++++++++++++++++++++++-----------
1 files changed, 78 insertions(+), 22 deletions(-)
diff --git a/SourceCode/Bond/Servo/Common.h b/SourceCode/Bond/Servo/Common.h
index aa287e8..fc13f87 100644
--- a/SourceCode/Bond/Servo/Common.h
+++ b/SourceCode/Bond/Servo/Common.h
@@ -16,6 +16,8 @@
#define RX_CODE_ALARM_SET 1008
#define RX_CODE_ALARM_CLEAR 1009
#define RX_CODE_EQ_DATA_CHANGED 1010
+#define RX_CODE_MASTER_STATE_CHANGED 1011
+#define RX_CODE_EQ_ROBOT_TASK 1012
/* Channel Name */
@@ -34,7 +36,13 @@
#define EQ_BOX_ONLINE RGB(0, 176, 80)
#define EQ_BOX_FRAME1 RGB(22, 22, 22)
#define EQ_BOX_FRAME2 RGB(255, 127, 39)
-
+#define CR_MSGBOX_BKGND RGB(7, 71, 166)
+#define CR_MSGBOX_TITLE RGB(200, 216, 246)
+#define CR_MSGBOX_MESSAGE RGB(200, 216, 246)
+#define TOP_TOOLBAR_BACKGROUND RGB(240, 240, 240)
+#define STATUSBAR_BK_NORMAL RGB(195, 195, 195)
+#define STATUSBAR_BK_RUNNING RGB(34, 177, 76)
+#define STATUSBAR_BK_ALARM RGB(255, 127, 39)
/* LOG BTN */
#define BTN_LOG_FRAME_NORMAL RGB(88, 88, 88)
@@ -53,22 +61,22 @@
#define BTN_ALARM_BKGND_PRESS RGB(133, 203, 225)
/* Equipment ID */
-#define EQ_ID_EFEM 1
-#define EQ_ID_Bonder1 2
-#define EQ_ID_Bonder2 3
-#define EQ_ID_LOADPORT1 4
-#define EQ_ID_LOADPORT2 5
-#define EQ_ID_LOADPORT3 6
-#define EQ_ID_LOADPORT4 7
+#define EQ_ID_LOADPORT1 1
+#define EQ_ID_LOADPORT2 2
+#define EQ_ID_LOADPORT3 3
+#define EQ_ID_LOADPORT4 4
+#define EQ_ID_ARM_TRAY1 5
+#define EQ_ID_ARM_TRAY2 6
+#define EQ_ID_ALIGNER 7
#define EQ_ID_FLIPER 8
#define EQ_ID_VACUUMBAKE 9
-#define EQ_ID_ALIGNER 10
-#define EQ_ID_BAKE_COOLING 11
-#define EQ_ID_MEASUREMENT 12
-#define EQ_ID_ARM 13
-#define EQ_ID_ARM_TRAY1 14
-#define EQ_ID_ARM_TRAY2 15
-#define EQ_ID_OPERATOR_REMOVE 999
+#define EQ_ID_Bonder1 10
+#define EQ_ID_Bonder2 11
+#define EQ_ID_BAKE_COOLING 12
+#define EQ_ID_MEASUREMENT 13
+#define EQ_ID_EFEM 100
+#define EQ_ID_ARM 101
+#define EQ_ID_OPERATOR_REMOVE 102
/* step name */
@@ -211,7 +219,30 @@
#define STEP_EQ_DISPATCHINT_MODE_CHANGE _T("EQDispatchingModeChangeCommand")
#define STEP_EFEM_ROBOT_CMD _T("EFEMRobotCmd")
#define STEP_EFEM_IN_OP_MODE_CHANGE _T("EFEMIndexerOperationModeChangeCommand")
-
+#define STEP_PORT1_TYPE_CHANGE _T("Port1TypeChange")
+#define STEP_PORT2_TYPE_CHANGE _T("Port2TypeChange")
+#define STEP_PORT3_TYPE_CHANGE _T("Port3TypeChange")
+#define STEP_PORT4_TYPE_CHANGE _T("Port4TypeChange")
+#define STEP_PORT1_MODE_CHANGE _T("Port1ModeChange")
+#define STEP_PORT2_MODE_CHANGE _T("Port2ModeChange")
+#define STEP_PORT3_MODE_CHANGE _T("Port3ModeChange")
+#define STEP_PORT4_MODE_CHANGE _T("Port4ModeChange")
+#define STEP_PORT1_TRANSFER_MODE_CHANGE _T("Port1TransferModeChange")
+#define STEP_PORT2_TRANSFER_MODE_CHANGE _T("Port2TransferModeChange")
+#define STEP_PORT3_TRANSFER_MODE_CHANGE _T("Port3TransferModeChange")
+#define STEP_PORT4_TRANSFER_MODE_CHANGE _T("Port4TransferModeChange")
+#define STEP_PORT1_ENABLE_MODE_CHANGE _T("Port1EnableModeChange")
+#define STEP_PORT2_ENABLE_MODE_CHANGE _T("Port2EnableModeChange")
+#define STEP_PORT3_ENABLE_MODE_CHANGE _T("Port3EnableModeChange")
+#define STEP_PORT4_ENABLE_MODE_CHANGE _T("Port4EnableModeChange")
+#define STEP_PORT1_TYPE_AUTO_CHANGE _T("Port1TypeAutoChange")
+#define STEP_PORT2_TYPE_AUTO_CHANGE _T("Port2TypeAutoChange")
+#define STEP_PORT3_TYPE_AUTO_CHANGE _T("Port3TypeAutoChange")
+#define STEP_PORT4_TYPE_AUTO_CHANGE _T("Port4TypeAutoChange")
+#define STEP_PORT1_CASSETTE_TYPE_CHANGE _T("Port1CassetteTypeChange")
+#define STEP_PORT2_CASSETTE_TYPE_CHANGE _T("Port2CassetteTypeChange")
+#define STEP_PORT3_CASSETTE_TYPE_CHANGE _T("Port3CassetteTypeChange")
+#define STEP_PORT4_CASSETTE_TYPE_CHANGE _T("Port4CassetteTypeChange")
/* Step ID */
@@ -334,7 +365,31 @@
#define STEP_ID_PORT4_INUSE 0x653
#define STEP_ID_PORT4_UNLOAD_READY 0x65b
#define STEP_ID_PORT4_BLOCKED 0x663
-#define STEP_ID_ROBOT_CMD_REPLY 0x6b0
+#define STEP_ID_PROT1_TYPE_CHANGE_REPLY 0x670
+#define STEP_ID_PROT2_TYPE_CHANGE_REPLY 0x671
+#define STEP_ID_PROT3_TYPE_CHANGE_REPLY 0x672
+#define STEP_ID_PROT4_TYPE_CHANGE_REPLY 0x673
+#define STEP_ID_PROT1_MODE_CHANGE_REPLY 0x678
+#define STEP_ID_PROT2_MODE_CHANGE_REPLY 0x679
+#define STEP_ID_PROT3_MODE_CHANGE_REPLY 0x67A
+#define STEP_ID_PROT4_MODE_CHANGE_REPLY 0x67B
+#define STEP_ID_PROT1_TRANSFER_MODE_CHANGE_REPLY 0x680
+#define STEP_ID_PROT2_TRANSFER_MODE_CHANGE_REPLY 0x681
+#define STEP_ID_PROT3_TRANSFER_MODE_CHANGE_REPLY 0x682
+#define STEP_ID_PROT4_TRANSFER_MODE_CHANGE_REPLY 0x683
+#define STEP_ID_PROT1_ENABLE_MODE_CHANGE_REPLY 0x688
+#define STEP_ID_PROT2_ENABLE_MODE_CHANGE_REPLY 0x689
+#define STEP_ID_PROT3_ENABLE_MODE_CHANGE_REPLY 0x68A
+#define STEP_ID_PROT4_ENABLE_MODE_CHANGE_REPLY 0x68B
+#define STEP_ID_PROT1_TYPE_AUTO_CHANGE_REPLY 0x690
+#define STEP_ID_PROT2_TYPE_AUTO_CHANGE_REPLY 0x691
+#define STEP_ID_PROT3_TYPE_AUTO_CHANGE_REPLY 0x692
+#define STEP_ID_PROT4_TYPE_AUTO_CHANGE_REPLY 0x693
+#define STEP_ID_PROT1_CASSETTE_TYPE_CHANGE_REPLY 0x698
+#define STEP_ID_PROT2_CASSETTE_TYPE_CHANGE_REPLY 0x699
+#define STEP_ID_PROT3_CASSETTE_TYPE_CHANGE_REPLY 0x69A
+#define STEP_ID_PROT4_CASSETTE_TYPE_CHANGE_REPLY 0x69B
+#define STEP_ID_ROBOT_CMD_REPLY 0x6b0
@@ -355,16 +410,12 @@
/* 流程控制相关代码 */
-#define FLOW_REJECT 0x0
-#define FLOW_ACCEPT 0x1
#define FLOW_TEST 0x1000
-#define FLOW_SIGNAL 0x1001
-#define FLOW_DATA 0x1002
-#define FLOW_MOVE_MATERIAL 0x1003
/* Port Status */
#define PORT_LOAD_READY 1
+#define PORT_LOAD_REQUEST PORT_LOAD_READY
#define PORT_LOADED 2
#define PORT_INUSE 3
#define PORT_LOAD_COMPLETE PORT_INUSE
@@ -432,3 +483,8 @@
#define RT_REQUEST_FROM_EAS 4
+ /* Robot Task Status */
+#define ROBOT_EVENT_CREATE 0 // 新任务创建
+#define ROBOT_EVENT_FINISH 1 // 正常完成
+#define ROBOT_EVENT_ERROR 2 // 出现错误
+#define ROBOT_EVENT_ABORT 3 // 人为中止
\ No newline at end of file
--
Gitblit v1.9.3