From 334b16b4abb4cbe3d1d4e4f211efd6f4468ae09f Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期五, 19 九月 2025 15:12:52 +0800
Subject: [PATCH] 1.ControlJob和ProcessJob的中断操作，强制结批增加字符串描述原因，方便生产跟踪。
---
SourceCode/Bond/Servo/CBonder.cpp | 274 ++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 264 insertions(+), 10 deletions(-)
diff --git a/SourceCode/Bond/Servo/CBonder.cpp b/SourceCode/Bond/Servo/CBonder.cpp
index 7ebd7be..797dada 100644
--- a/SourceCode/Bond/Servo/CBonder.cpp
+++ b/SourceCode/Bond/Servo/CBonder.cpp
@@ -157,7 +157,6 @@
}
}
-
{
CEqDateTimeSetCmdStep* pStep = new CEqDateTimeSetCmdStep();
pStep->setName(STEP_DATETIME_SET_CMD);
@@ -224,13 +223,14 @@
{
// recipe parameter report
CEqReadStep* pStep = new CEqReadStep(m_nIndex == 0 ? 0xaa54 : 0xea54, 257 * 2,
- [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
+ [&, pStep](void* pFrom, int code, const char* pszData, size_t size) -> int {
+ CEqReadStep* pTmpStep = (CEqReadStep*)pFrom;
+ short ret = MRLRC_OK;
if (code == ROK && pszData != nullptr && size > 0) {
// 此处解释配方数据
- short ret = decodeRecipeParameterReport(pszData, size);
- pStep->setReturnCode(ret);
+ ret = decodeRecipeParameterReport(pszData, size);
}
- pStep->setReturnCode(MRLRC_OK);
+ pTmpStep->setReturnCode(ret);
return -1;
});
pStep->setName(STEP_EQ_RECIPE_PARAMETER);
@@ -265,6 +265,7 @@
}
}
}
+
{
// Sent Out Job Report Downstream #1~9
char szBuffer[256];
@@ -349,12 +350,15 @@
}
}
+ // FAC Data Report
+ addFacDataReportStep(m_nIndex == 0 ? 0xA589 : 0xE589,
+ m_nIndex == 0 ? 0x34d : 0x64d, 1);
+ /*
{
- // FAC Data Report
- CEqReadStep* pStep = new CEqReadStep(0xA60E, 108 * 2,
+ CEqReadStep* pStep = new CEqReadStep(m_nIndex == 0 ? 0xA589 : 0xE589, 133 * 2,
[&](void* pFrom, int code, const char* pszData, size_t size) -> int {
if (code == ROK && pszData != nullptr && size > 0) {
- decodePanelDataReport((CStep*)pFrom, pszData, size);
+ decodeFacDataReport((CStep*)pFrom, pszData, size);
}
return -1;
});
@@ -365,6 +369,7 @@
delete pStep;
}
}
+ */
// process start/end report
{
@@ -460,7 +465,7 @@
return m_nIndex;
}
- BOOL CBonder::hasBondClass()
+ BOOL CBonder::hasBondGlass()
{
CGlass* pGlass = (CGlass*)m_slot[1].getContext();
if (pGlass == nullptr) return FALSE;
@@ -468,7 +473,7 @@
return pBuddy != nullptr;
}
- BOOL CBonder::hasG2Class()
+ BOOL CBonder::hasG2Glass()
{
CGlass* pGlass = (CGlass*)m_slot[0].getContext();
return (pGlass != nullptr);
@@ -522,4 +527,253 @@
{
return m_nIndex == 0 ? 15000 : 20000;
}
+
+ int CBonder::parsingParams(const char* pszData, size_t size, std::vector<CParam>& params)
+ {
+ ASSERT(pszData);
+ if (size < 250) return 0;
+ int i = 0, v;
+
+
+ // 1.校正对位延时
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("校正对位延时", "", this->getName().c_str(), v * 0.01f));
+ i += 2;
+
+ // 2.保压时间
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("保压时间", "", this->getName().c_str(), v * 0.01f));
+ i += 2;
+
+ // 3.腔体破真空延时
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("腔体破真空延时", "", this->getName().c_str(), v * 0.01f));
+ i += 2;
+
+ // 4.腔体分子泵启动延时
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("腔体分子泵启动延时", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 5.腔体贴附抽真空延时
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("腔体贴附抽真空延时", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 6.加热等待延时
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("加热等待延时", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 7.气囊压力设定
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("气囊压力设定", "", this->getName().c_str(), v * 0.001f));
+ i += 4;
+
+ // 8.气囊加压速率
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("气囊加压速率", "", this->getName().c_str(), v * 0.001f));
+ i += 4;
+
+ // 9.气囊泄压速率
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("气囊泄压速率", "", this->getName().c_str(), v * 0.001f));
+ i += 4;
+
+ // 10.贴附压力上限
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("贴附压力上限", "", this->getName().c_str(), v * 0.1f));
+ i += 4;
+
+ // 11.Z轴转矩速度设定
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("上腔Z轴转矩速度设定", "", this->getName().c_str(), v * 0.001f));
+ i += 4;
+
+ // 12.上腔温度设定
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("上腔温度设定", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 13.下腔温度设定
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("下腔温度设定", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 14.上腔Z轴预贴合位速度
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("上腔Z轴预贴合位速度", "", this->getName().c_str(), v * 0.001f));
+ i += 4;
+
+ // 15.上腔Z轴贴附位速度
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("上腔Z轴贴附位速度", "", this->getName().c_str(), v * 0.001f));
+ i += 4;
+
+ // 16.上腔Z上腔加热位间距
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("上腔Z上腔加热位间距", "", this->getName().c_str(), v * 0.001f));
+ i += 4;
+
+ // 17.上腔贴附位压入量
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("上腔贴附位压入量", "", this->getName().c_str(), v * 0.001f));
+ i += 4;
+
+ // 18.上腔Z轴破真空距离
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("上腔Z轴破真空距离", "", this->getName().c_str(), v * 0.001f));
+ i += 4;
+
+ // 19.下顶Pin破真空距离
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("下顶Pin破真空距离", "", this->getName().c_str(), v * 0.001f));
+ i += 4;
+
+ // 20.下顶Pin加热位间距
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("下顶Pin加热位间距", "", this->getName().c_str(), v * 0.001f));
+ i += 4;
+
+ // 21.腔体真空泵真空规设定值
+ params.push_back(CParam("腔体真空泵真空规设定值", "", this->getName().c_str(), (double)toFloat(&pszData[i])));
+ i += 4;
+
+ // 22.腔体分子泵到达设定值
+ params.push_back(CParam("腔体分子泵到达设定值", "", this->getName().c_str(), (double)toFloat(&pszData[i])));
+ i += 4;
+
+
+ return (int)params.size();
+ }
+
+ int CBonder::parsingProcessData(const char* pszData, size_t size, std::vector<CParam>& params)
+ {
+ return parsingParams(pszData, size, params);
+ }
+
+ int CBonder::parsingSVData(const char* pszData, size_t size, std::vector<CParam>& params)
+ {
+ /*
+ 1 工艺运行步骤 1Word 123456
+ 2 气囊压力当前 2Word 12345.6
+ 3 上腔压力合计 1Word 1234.56
+ 4 管道真空规值 FLOAT 123.456
+ 5 腔体真空规值 FLOAT 123.456
+ 6 上腔温度1 1Word 12345.6
+ 7 上腔温度2 1Word 12345.6
+ 8 上腔温度3 1Word 12345.6
+ 9 上腔温度4 1Word 12345.6
+ 10 上腔温度5 1Word 12345.6
+ 11 上腔温度6 1Word 12345.6
+ 12 下腔温度1 1Word 12345.6
+ 13 下腔温度2 1Word 12345.6
+ 14 下腔温度3 1Word 12345.6
+ 15 下腔温度4 1Word 12345.6
+ 16 下腔温度5 1Word 12345.6
+ 17 下腔温度6 1Word 12345.6
+ 18 压合剩余时间 1Word 1234.56
+*/
+
+ ASSERT(pszData);
+ if (size < 125) return 0;
+ int i = 0, v;
+
+
+ // 1.工艺运行步骤
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("工艺运行步骤", "", this->getName().c_str(), v));
+ i += 2;
+
+ // 2.气囊压力当前
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
+ params.push_back(CParam("气囊压力当前", "", this->getName().c_str(), v * 0.1f));
+ i += 4;
+
+ // 3.上腔压力合计
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("上腔压力合计", "", this->getName().c_str(), ((short)v) * 0.01f));
+ i += 2;
+
+ // 4.管道真空规值
+ params.push_back(CParam("管道真空规值", "", this->getName().c_str(), (double)toFloat(&pszData[i])));
+ i += 4;
+
+ // 5.腔体真空规值
+ params.push_back(CParam("腔体真空规值", "", this->getName().c_str(), (double)toFloat(&pszData[i])));
+ i += 4;
+
+ // 6.上腔温度1
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("上腔温度1", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 7.上腔温度2
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("上腔温度2", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 8.上腔温度3
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("上腔温度3", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 9.上腔温度4
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("上腔温度4", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 10.上腔温度5
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("上腔温度5", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 11.上腔温度6
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("上腔温度6", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 12.下腔温度1
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("下腔温度1", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 13.下腔温度2
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("下腔温度2", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 14.下腔温度3
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("下腔温度3", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 15.下腔温度4
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("下腔温度4", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 16.下腔温度5
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("下腔温度5", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 17.下腔温度6
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("下腔温度6", "", this->getName().c_str(), v * 0.1f));
+ i += 2;
+
+ // 18.加热剩余时间
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("加热剩余时间", "", this->getName().c_str(), v * 0.01f));
+ i += 2;
+
+ // 19.压合剩余时间
+ v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
+ params.push_back(CParam("压合剩余时间", "", this->getName().c_str(), v * 0.01f));
+ i += 2;
+
+ return (int)params.size();
+ }
+
}
--
Gitblit v1.9.3