From 26c208594fba1cae3a71d2caa9ff744e3ece81de Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期四, 12 六月 2025 11:47:22 +0800
Subject: [PATCH] 1.准备增加机器手臂的选择；
---
SourceCode/Bond/Servo/CMaster.cpp | 148 +++++++++++++++++++++++++++++++-----------------
1 files changed, 95 insertions(+), 53 deletions(-)
diff --git a/SourceCode/Bond/Servo/CMaster.cpp b/SourceCode/Bond/Servo/CMaster.cpp
index bc2a884..2b509e8 100644
--- a/SourceCode/Bond/Servo/CMaster.cpp
+++ b/SourceCode/Bond/Servo/CMaster.cpp
@@ -284,11 +284,15 @@
// Bonder1和Bonder2需要的G2就过不来了
// 最基本的实现，可以G2和G2轮流搬送，但最好根据Bonder的需求来决定
MaterialsType primaryType, secondaryType;
+ int armNo = 1; // 默认使用手臂2
// 各种机器
+ CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
+ CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
+ CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
@@ -297,8 +301,11 @@
CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
+ ASSERT(pEFEM);
ASSERT(pLoadPort1);
ASSERT(pLoadPort2);
+ ASSERT(pLoadPort3);
+ ASSERT(pLoadPort4);
ASSERT(pFliper);
ASSERT(pVacuumBack);
ASSERT(pAligner);
@@ -369,9 +376,41 @@
}
+ // Measurement -> LoadPort
+ CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
+ CEquipment* pEqTar[] = { pVacuumBack, pFliper };
+ if (primaryType == MaterialsType::G2) {
+ pEqTar[0] = pFliper;
+ pEqTar[1] = pVacuumBack;
+ }
+ for (int s = 0; s < 4; s++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Unloading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
+ m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_PUT;
+ }
+ }
+ }
+
+ PORT_PUT:
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+
// BakeCooling ->Measurement
m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -386,6 +425,7 @@
// Bake -> Cooling
m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -399,6 +439,7 @@
// Bonder -> BakeCooling
m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -410,6 +451,7 @@
m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -420,8 +462,9 @@
}
// Aligner -> Bonder
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -431,8 +474,9 @@
continue;
}
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -445,8 +489,9 @@
// Fliper(G2) -> Aligner
// VacuumBake(G1) -> Aligner
- m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -456,8 +501,9 @@
continue;
}
- m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType);
+ m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType, armNo);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -470,14 +516,22 @@
// LoadPort -> Fliper(G2)
// LoadPort -> VacuumBake(G1)
- CEquipment* pEqTar1 = pVacuumBack;
- CEquipment* pEqTar2 = pFliper;
- if (primaryType == MaterialsType::G2) {
- pEqTar1 = pFliper;
- pEqTar2 = pVacuumBack;
+ for (int s = 0; s < 4; s++) {
+ for (int t = 0; t < 2; t++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Loading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
+ m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pEqTar[t], primaryType, secondaryType, armNo);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_GET;
+ }
+ }
+ }
}
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar1, primaryType, secondaryType);
+
+PORT_GET:
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
@@ -486,47 +540,6 @@
LOGI("创建新任务<%s>...", strDescription.c_str());
continue;
}
-
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar1, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
-
-
- // LoadPort -> VacuumBake(G1)
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar2, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar2, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
-
- // Measurement -> LoadPort
-
-
unlock();
@@ -1116,7 +1129,8 @@
static int taskSeqNo = 0;
CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq,
- MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/)
+ MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
+ int armNo/* = 1*/)
{
CRobotTask* pTask = nullptr;
CSlot* pSrcSlot, * pTarSlot;
@@ -1131,7 +1145,8 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
- pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ pTask->setRobotTransferParam(++taskSeqNo, armNo, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1151,6 +1166,7 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1172,6 +1188,7 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1192,6 +1209,7 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
}
@@ -1200,4 +1218,28 @@
return pTask;
}
+ int CMaster::abortCurrentTask()
+ {
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->abort();
+ }
+ unlock();
+
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_ABORT);
+ }
+
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ delete m_pActiveRobotTask;
+ m_pActiveRobotTask = nullptr;
+ }
+ unlock();
+
+ // 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
+ stop();
+
+ return 0;
+ }
}
--
Gitblit v1.9.3