From 23cce52f9abd7dfd8e4eddd6068810e70c0a4ffa Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期四, 12 六月 2025 15:10:40 +0800
Subject: [PATCH] 1.转换为新的站号和Slot
---
SourceCode/Bond/Servo/CMaster.cpp | 443 ++++++++++++++++++++++++++++++++++++++++++-------------
1 files changed, 337 insertions(+), 106 deletions(-)
diff --git a/SourceCode/Bond/Servo/CMaster.cpp b/SourceCode/Bond/Servo/CMaster.cpp
index 2783329..9529f2b 100644
--- a/SourceCode/Bond/Servo/CMaster.cpp
+++ b/SourceCode/Bond/Servo/CMaster.cpp
@@ -287,21 +287,31 @@
// 各种机器
+ CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
+ CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
+ CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
- CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
+ CVacuumBake* pVacuumBake = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
CBonder* pBonder1 = (CBonder*)getEquipment(EQ_ID_Bonder1);
CBonder* pBonder2 = (CBonder*)getEquipment(EQ_ID_Bonder2);
+ CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
+ CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
+ ASSERT(pEFEM);
ASSERT(pLoadPort1);
ASSERT(pLoadPort2);
+ ASSERT(pLoadPort3);
+ ASSERT(pLoadPort4);
ASSERT(pFliper);
- ASSERT(pVacuumBack);
+ ASSERT(pVacuumBake);
ASSERT(pAligner);
ASSERT(pBonder1);
ASSERT(pBonder2);
+ ASSERT(pBakeCooling);
+ ASSERT(pMeasurement);
while (1) {
// 待退出信号或时间到
@@ -365,106 +375,60 @@
}
-
- // Aligner -> Bonder
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
-
- // Fliper(G2) -> Aligner
- // VacuumBake(G1) -> Aligner
- m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
- m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
-
- // LoadPort -> Fliper(G2)
- // LoadPort -> VacuumBake(G1)
- CEquipment* pEqTar1 = pVacuumBack;
- CEquipment* pEqTar2 = pFliper;
+ // Measurement -> LoadPort
+ CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
+ CEquipment* pEqTar[] = { pVacuumBake, pFliper };
if (primaryType == MaterialsType::G2) {
- pEqTar1 = pFliper;
- pEqTar2 = pVacuumBack;
+ pEqTar[0] = pFliper;
+ pEqTar[1] = pVacuumBake;
}
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar1, primaryType, secondaryType);
- if (m_pActiveRobotTask != nullptr) {
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
+ for (int s = 0; s < 4; s++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Unloading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
+ m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_PUT;
+ }
}
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
}
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar1, primaryType, secondaryType);
+ PORT_PUT:
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
}
LOGI("创建新任务<%s>...", strDescription.c_str());
continue;
}
-
- // LoadPort -> VacuumBake(G1)
- m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar2, primaryType, secondaryType);
+ // BakeCooling ->Measurement
+ m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
}
LOGI("创建新任务<%s>...", strDescription.c_str());
continue;
}
- m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar2, primaryType, secondaryType);
+
+ // BakeCooling内部
+ // Bake -> Cooling
+ m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
unlock();
if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
}
LOGI("创建新任务<%s>...", strDescription.c_str());
continue;
@@ -472,14 +436,130 @@
// Bonder -> BakeCooling
+ m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ // Fliper(G2) -> Bonder
+ // VacuumBake(G1) -> Bonder
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ // Aligner -> Fliper(G2)
+ // Aligner -> VacuumBake(G1)
+ m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType, 2);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
- // BakeCooling ->Measurement
+ // LoadPort -> Aligner
+ for (int s = 0; s < 4; s++) {
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Loading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
+ m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pAligner, primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_GET;
+ }
+ }
+ }
-
- // Measurement -> LoadPort
-
-
+PORT_GET:
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
unlock();
@@ -504,6 +584,7 @@
break;
}
+ // 读标志位
for (auto item : m_listEquipment) {
if (item->getID() == EQ_ID_Bonder1 ||
item->getID() == EQ_ID_Bonder2) {
@@ -647,12 +728,11 @@
lock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_FINISH);
+ }
delete m_pActiveRobotTask;
m_pActiveRobotTask = nullptr;
-
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
- }
}
unlock();
}
@@ -921,42 +1001,40 @@
CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
- nRet = pLoadPort1->getPin("Out1")->connectPin(pFliper->getPin("In1"));
+ nRet = pLoadPort1->getPin("Out")->connectPin(pAligner->getPin("In1"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out1")->connectPin(pFliper->getPin("In2"));
+ nRet = pLoadPort2->getPin("Out")->connectPin(pAligner->getPin("In2"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort1->getPin("Out2")->connectPin(pVacuumBake->getPin("In1"));
+ nRet = pAligner->getPin("Out1")->connectPin(pFliper->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out2")->connectPin(pVacuumBake->getPin("In2"));
+ nRet = pAligner->getPin("Out2")->connectPin(pVacuumBake->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-VacuumBake失败");
}
- nRet = pFliper->getPin("Out")->connectPin(pAligner->getPin("In1"));
+ nRet = pFliper->getPin("Out1")->connectPin(pBonder1->getPin("In1"));
if (nRet < 0) {
- LOGE("连接Fliper-Aligner失败");
+ LOGE("连接Fliper-Bonder1失败");
+ }
+ nRet = pFliper->getPin("Out2")->connectPin(pBonder2->getPin("In1"));
+ if (nRet < 0) {
+ LOGE("连接Fliper-Bonder2失败");
}
- nRet = pVacuumBake->getPin("Out")->connectPin(pAligner->getPin("In2"));
+ nRet = pVacuumBake->getPin("Out1")->connectPin(pBonder1->getPin("In2"));
if (nRet < 0) {
- LOGE("连接VacuumBake-Aligner失败");
+ LOGE("连接VacuumBake-Bonder1失败");
}
-
- nRet = pAligner->getPin("Out1")->connectPin(pBonder1->getPin("In"));
+ nRet = pVacuumBake->getPin("Out2")->connectPin(pBonder2->getPin("In2"));
if (nRet < 0) {
- LOGE("连接Aligner-Bondere1失败");
- }
-
- nRet = pAligner->getPin("Out2")->connectPin(pBonder2->getPin("In"));
- if (nRet < 0) {
- LOGE("连接Aligner-Bondere2失败");
+ LOGE("连接VacuumBake-Bonder2失败");
}
nRet = pBonder1->getPin("Out")->connectPin(pBakeCooling->getPin("In1"));
@@ -1069,26 +1147,179 @@
static int taskSeqNo = 0;
CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq,
- MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/)
+ MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
+ int armNo/* = 1*/)
{
CRobotTask* pTask = nullptr;
CSlot* pSrcSlot, * pTarSlot;
pTarSlot = pTarEq->getAvailableSlotForGlass(primaryType);
- pSrcSlot = pSrcEq->getNonEmptySlot(primaryType);
+ pSrcSlot = pSrcEq->getProcessedSlot(primaryType);
if (pSrcSlot == nullptr || nullptr == pTarSlot) {
pTarSlot = pTarEq->getAvailableSlotForGlass(secondaryType);
- pSrcSlot = pSrcEq->getNonEmptySlot(secondaryType);
+ pSrcSlot = pSrcEq->getProcessedSlot(secondaryType);
}
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
- pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
- pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ pTask->setRobotTransferParam(++taskSeqNo, armNo, srcPos,
+ tarPos, srcSlot, tarSlot);
}
return pTask;
}
+
+ CRobotTask* CMaster::createTransferTask_bonder_to_bakecooling(CEquipment* pSrcEq, CEquipment* pTarEq)
+ {
+ std::vector<int> slots = {1, 2};
+
+ CRobotTask* pTask = nullptr;
+ CSlot* pSrcSlot, * pTarSlot;
+ pTarSlot = pTarEq->getAvailableSlotForGlass2(MaterialsType::G1, slots);
+ pSrcSlot = pSrcEq->getProcessedSlot(MaterialsType::G1);
+
+ if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
+ pTask = new CRobotTask();
+ pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ pTask->setRobotTransferParam(++taskSeqNo, 1, srcPos,
+ tarPos, srcSlot, tarSlot);
+ }
+
+
+ return pTask;
+ }
+
+ CRobotTask* CMaster::createTransferTask_bake_to_cooling(CEquipment* pSrcEq)
+ {
+ std::vector<int> slotsTar = { 3, 4 };
+ std::vector<int> slotsSrc = { 1, 2 };
+
+ CRobotTask* pTask = nullptr;
+ CSlot* pSrcSlot, * pTarSlot;
+ pTarSlot = pSrcEq->getAvailableSlotForGlass2(MaterialsType::G1, slotsTar);
+ pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slotsSrc);
+
+ if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
+ pTask = new CRobotTask();
+ pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ pTask->setRobotTransferParam(++taskSeqNo, 1, srcPos,
+ tarPos, srcSlot, tarSlot);
+ }
+
+
+ return pTask;
+ }
+
+ CRobotTask* CMaster::createTransferTask_bakecooling_to_measurement(CEquipment* pSrcEq, CEquipment* pTarEq)
+ {
+ std::vector<int> slots = { 3, 4 };
+
+ CRobotTask* pTask = nullptr;
+ CSlot* pSrcSlot, * pTarSlot;
+ pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G1);
+ pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);
+
+ if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
+ pTask = new CRobotTask();
+ pTask->setContext(pSrcSlot->getContext());
+ pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
+ pTask->setRobotTransferParam(++taskSeqNo, 1, srcPos,
+ tarPos, srcSlot, tarSlot);
+ }
+
+
+ return pTask;
+ }
+
+ void CMaster::transformPosAndSlot(int srcPos, int srcSlot, int& tarPos, int& tarSlot)
+ {
+ switch (srcPos)
+ {
+ case EQ_ID_LOADPORT1:
+ case EQ_ID_LOADPORT2:
+ case EQ_ID_LOADPORT3:
+ case EQ_ID_LOADPORT4:
+ case EQ_ID_ARM_TRAY1:
+ case EQ_ID_ARM_TRAY2:
+ case EQ_ID_ALIGNER:
+ case EQ_ID_FLIPER:
+ tarPos = srcPos;
+ tarSlot = 1;
+ break;
+ case EQ_ID_Bonder1:
+ if (1 <= srcSlot && srcSlot <= 2) {
+ tarPos = 9 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_Bonder2:
+ if (1 <= srcSlot && srcSlot <= 2) {
+ tarPos = 11 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_VACUUMBAKE:
+ if (1 <= srcSlot && srcSlot <= 2) {
+ tarPos = 13 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_BAKE_COOLING:
+ if (1 <= srcSlot && srcSlot <= 4) {
+ tarPos = 15 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_MEASUREMENT:
+ tarPos = 19;
+ tarSlot = 1;
+ break;
+ default:
+ tarPos = srcPos;
+ tarSlot = srcSlot;
+ break;
+ }
+ }
+
+ int CMaster::abortCurrentTask()
+ {
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->abort();
+ }
+ unlock();
+
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_ABORT);
+ }
+
+ lock();
+ if (m_pActiveRobotTask != nullptr) {
+ delete m_pActiveRobotTask;
+ m_pActiveRobotTask = nullptr;
+ }
+ unlock();
+
+ // 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
+ stop();
+
+ return 0;
+ }
}
--
Gitblit v1.9.3