From 23cce52f9abd7dfd8e4eddd6068810e70c0a4ffa Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期四, 12 六月 2025 15:10:40 +0800
Subject: [PATCH] 1.转换为新的站号和Slot
---
SourceCode/Bond/Servo/CMaster.cpp | 224 ++++++++++++++++++++++++++++++++++++++------------------
1 files changed, 152 insertions(+), 72 deletions(-)
diff --git a/SourceCode/Bond/Servo/CMaster.cpp b/SourceCode/Bond/Servo/CMaster.cpp
index 2b509e8..9529f2b 100644
--- a/SourceCode/Bond/Servo/CMaster.cpp
+++ b/SourceCode/Bond/Servo/CMaster.cpp
@@ -284,7 +284,6 @@
// Bonder1和Bonder2需要的G2就过不来了
// 最基本的实现，可以G2和G2轮流搬送，但最好根据Bonder的需求来决定
MaterialsType primaryType, secondaryType;
- int armNo = 1; // 默认使用手臂2
// 各种机器
@@ -294,7 +293,7 @@
CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
- CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
+ CVacuumBake* pVacuumBake = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
CBonder* pBonder1 = (CBonder*)getEquipment(EQ_ID_Bonder1);
CBonder* pBonder2 = (CBonder*)getEquipment(EQ_ID_Bonder2);
@@ -307,7 +306,7 @@
ASSERT(pLoadPort3);
ASSERT(pLoadPort4);
ASSERT(pFliper);
- ASSERT(pVacuumBack);
+ ASSERT(pVacuumBake);
ASSERT(pAligner);
ASSERT(pBonder1);
ASSERT(pBonder2);
@@ -378,16 +377,16 @@
// Measurement -> LoadPort
CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
- CEquipment* pEqTar[] = { pVacuumBack, pFliper };
+ CEquipment* pEqTar[] = { pVacuumBake, pFliper };
if (primaryType == MaterialsType::G2) {
pEqTar[0] = pFliper;
- pEqTar[1] = pVacuumBack;
+ pEqTar[1] = pVacuumBake;
}
for (int s = 0; s < 4; s++) {
if (pEqLoadPort[s]->isEnable()
&& pEqLoadPort[s]->getPortType() == PortType::Unloading
&& pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
- m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType, armNo);
+ m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
goto PORT_PUT;
}
@@ -461,8 +460,9 @@
continue;
}
- // Aligner -> Bonder
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType, armNo);
+ // Fliper(G2) -> Bonder
+ // VacuumBake(G1) -> Bonder
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
@@ -474,7 +474,57 @@
continue;
}
- m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType, armNo);
+ m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ // Aligner -> Fliper(G2)
+ // Aligner -> VacuumBake(G1)
+ m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType, 2);
+ if (m_pActiveRobotTask != nullptr) {
+ m_pActiveRobotTask->run();
+ std::string strDescription = m_pActiveRobotTask->getDescription();
+ unlock();
+ if (m_listener.onRobotTaskEvent != nullptr) {
+ m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
+ }
+ LOGI("创建新任务<%s>...", strDescription.c_str());
+ continue;
+ }
+
+ m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType);
if (m_pActiveRobotTask != nullptr) {
m_pActiveRobotTask->run();
std::string strDescription = m_pActiveRobotTask->getDescription();
@@ -487,44 +537,14 @@
}
- // Fliper(G2) -> Aligner
- // VacuumBake(G1) -> Aligner
- m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType, armNo);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
- m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType, armNo);
- if (m_pActiveRobotTask != nullptr) {
- m_pActiveRobotTask->run();
- std::string strDescription = m_pActiveRobotTask->getDescription();
- unlock();
- if (m_listener.onRobotTaskEvent != nullptr) {
- m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
- }
- LOGI("创建新任务<%s>...", strDescription.c_str());
- continue;
- }
-
-
- // LoadPort -> Fliper(G2)
- // LoadPort -> VacuumBake(G1)
+ // LoadPort -> Aligner
for (int s = 0; s < 4; s++) {
- for (int t = 0; t < 2; t++) {
- if (pEqLoadPort[s]->isEnable()
- && pEqLoadPort[s]->getPortType() == PortType::Loading
- && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
- m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pEqTar[t], primaryType, secondaryType, armNo);
- if (m_pActiveRobotTask != nullptr) {
- goto PORT_GET;
- }
+ if (pEqLoadPort[s]->isEnable()
+ && pEqLoadPort[s]->getPortType() == PortType::Loading
+ && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
+ m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pAligner, primaryType, secondaryType);
+ if (m_pActiveRobotTask != nullptr) {
+ goto PORT_GET;
}
}
}
@@ -981,42 +1001,40 @@
CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);
- nRet = pLoadPort1->getPin("Out1")->connectPin(pFliper->getPin("In1"));
+ nRet = pLoadPort1->getPin("Out")->connectPin(pAligner->getPin("In1"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out1")->connectPin(pFliper->getPin("In2"));
+ nRet = pLoadPort2->getPin("Out")->connectPin(pAligner->getPin("In2"));
if (nRet < 0) {
LOGE("连接LoadPort1-Fliper失败");
}
- nRet = pLoadPort1->getPin("Out2")->connectPin(pVacuumBake->getPin("In1"));
+ nRet = pAligner->getPin("Out1")->connectPin(pFliper->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-Fliper失败");
}
- nRet = pLoadPort2->getPin("Out2")->connectPin(pVacuumBake->getPin("In2"));
+ nRet = pAligner->getPin("Out2")->connectPin(pVacuumBake->getPin("In"));
if (nRet < 0) {
- LOGE("连接LoadPort1-VacuumBake失败");
+ LOGE("连接Aligner-VacuumBake失败");
}
- nRet = pFliper->getPin("Out")->connectPin(pAligner->getPin("In1"));
+ nRet = pFliper->getPin("Out1")->connectPin(pBonder1->getPin("In1"));
if (nRet < 0) {
- LOGE("连接Fliper-Aligner失败");
+ LOGE("连接Fliper-Bonder1失败");
+ }
+ nRet = pFliper->getPin("Out2")->connectPin(pBonder2->getPin("In1"));
+ if (nRet < 0) {
+ LOGE("连接Fliper-Bonder2失败");
}
- nRet = pVacuumBake->getPin("Out")->connectPin(pAligner->getPin("In2"));
+ nRet = pVacuumBake->getPin("Out1")->connectPin(pBonder1->getPin("In2"));
if (nRet < 0) {
- LOGE("连接VacuumBake-Aligner失败");
+ LOGE("连接VacuumBake-Bonder1失败");
}
-
- nRet = pAligner->getPin("Out1")->connectPin(pBonder1->getPin("In"));
+ nRet = pVacuumBake->getPin("Out2")->connectPin(pBonder2->getPin("In2"));
if (nRet < 0) {
- LOGE("连接Aligner-Bondere1失败");
- }
-
- nRet = pAligner->getPin("Out2")->connectPin(pBonder2->getPin("In"));
- if (nRet < 0) {
- LOGE("连接Aligner-Bondere2失败");
+ LOGE("连接VacuumBake-Bonder2失败");
}
nRet = pBonder1->getPin("Out")->connectPin(pBakeCooling->getPin("In1"));
@@ -1143,11 +1161,14 @@
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- pTask->setRobotTransferParam(++taskSeqNo, armNo, pSrcSlot->getPosition(),
- pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ pTask->setRobotTransferParam(++taskSeqNo, armNo, srcPos,
+ tarPos, srcSlot, tarSlot);
}
@@ -1164,11 +1185,14 @@
pSrcSlot = pSrcEq->getProcessedSlot(MaterialsType::G1);
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
- pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ pTask->setRobotTransferParam(++taskSeqNo, 1, srcPos,
+ tarPos, srcSlot, tarSlot);
}
@@ -1186,11 +1210,14 @@
pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slotsSrc);
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
- pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ pTask->setRobotTransferParam(++taskSeqNo, 1, srcPos,
+ tarPos, srcSlot, tarSlot);
}
@@ -1207,17 +1234,70 @@
pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);
if (pSrcSlot != nullptr && nullptr != pTarSlot) {
+ int srcPos, srcSlot, tarPos, tarSlot;
+ transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
+ transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
pTask = new CRobotTask();
pTask->setContext(pSrcSlot->getContext());
pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
- pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
- pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
+ pTask->setRobotTransferParam(++taskSeqNo, 1, srcPos,
+ tarPos, srcSlot, tarSlot);
}
return pTask;
}
+ void CMaster::transformPosAndSlot(int srcPos, int srcSlot, int& tarPos, int& tarSlot)
+ {
+ switch (srcPos)
+ {
+ case EQ_ID_LOADPORT1:
+ case EQ_ID_LOADPORT2:
+ case EQ_ID_LOADPORT3:
+ case EQ_ID_LOADPORT4:
+ case EQ_ID_ARM_TRAY1:
+ case EQ_ID_ARM_TRAY2:
+ case EQ_ID_ALIGNER:
+ case EQ_ID_FLIPER:
+ tarPos = srcPos;
+ tarSlot = 1;
+ break;
+ case EQ_ID_Bonder1:
+ if (1 <= srcSlot && srcSlot <= 2) {
+ tarPos = 9 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_Bonder2:
+ if (1 <= srcSlot && srcSlot <= 2) {
+ tarPos = 11 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_VACUUMBAKE:
+ if (1 <= srcSlot && srcSlot <= 2) {
+ tarPos = 13 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_BAKE_COOLING:
+ if (1 <= srcSlot && srcSlot <= 4) {
+ tarPos = 15 + srcSlot;
+ tarSlot = 1;
+ }
+ break;
+ case EQ_ID_MEASUREMENT:
+ tarPos = 19;
+ tarSlot = 1;
+ break;
+ default:
+ tarPos = srcPos;
+ tarSlot = srcSlot;
+ break;
+ }
+ }
+
int CMaster::abortCurrentTask()
{
lock();
--
Gitblit v1.9.3