From 23cce52f9abd7dfd8e4eddd6068810e70c0a4ffa Mon Sep 17 00:00:00 2001
From: LAPTOP-SNT8I5JK\Boounion <Chenluhua@qq.com>
Date: 星期四, 12 六月 2025 15:10:40 +0800
Subject: [PATCH] 1.转换为新的站号和Slot
---
SourceCode/Bond/Servo/CBonder.cpp | 115 ++++++++++++++++++++++++++++++++-------------------------
1 files changed, 64 insertions(+), 51 deletions(-)
diff --git a/SourceCode/Bond/Servo/CBonder.cpp b/SourceCode/Bond/Servo/CBonder.cpp
index 655c99a..db7cf76 100644
--- a/SourceCode/Bond/Servo/CBonder.cpp
+++ b/SourceCode/Bond/Servo/CBonder.cpp
@@ -34,7 +34,8 @@
{
// 加入Pin初始化代码
LOGI("<CBonder>initPins");
- addPin(SERVO::PinType::INPUT, _T("In"));
+ addPin(SERVO::PinType::INPUT, _T("In1"));
+ addPin(SERVO::PinType::INPUT, _T("In2"));
addPin(SERVO::PinType::OUTPUT, _T("Out"));
}
@@ -334,6 +335,55 @@
}
}
}
+
+ {
+ // Panel Data Report
+ CEqReadStep* pStep = new CEqReadStep(0xA17f, 386 * 2,
+ [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
+ if (code == ROK && pszData != nullptr && size > 0) {
+ decodePanelDataReport((CStep*)pFrom, pszData, size);
+ }
+ return -1;
+ });
+ pStep->setName(STEP_EQ_PANEL_DATA_REPORT);
+ pStep->setProp("Port", (void*)1);
+ pStep->setWriteSignalDev(0x45e);
+ if (addStep(STEP_ID_PANEL_DATA_REPORT, pStep) != 0) {
+ delete pStep;
+ }
+ }
+
+ {
+ // FAC Data Report
+ CEqReadStep* pStep = new CEqReadStep(0xA60E, 108 * 2,
+ [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
+ if (code == ROK && pszData != nullptr && size > 0) {
+ decodePanelDataReport((CStep*)pFrom, pszData, size);
+ }
+ return -1;
+ });
+ pStep->setName(STEP_EQ_FAC_DATA_REPORT);
+ pStep->setProp("Port", (void*)1);
+ pStep->setWriteSignalDev(0x34d);
+ if (addStep(STEP_ID_FAC_DATA_REPORT, pStep) != 0) {
+ delete pStep;
+ }
+ }
+ }
+
+ // 必须要实现的虚函数，在此初始化Slot信息
+ void CBonder::initSlots()
+ {
+ m_slot[0].enable();
+ m_slot[0].setPosition(m_nID);
+ m_slot[0].setNo(1);
+ m_slot[0].setName("Slot 1(G2)");
+ m_slot[0].setType(MaterialsType::G2);
+ m_slot[1].enable();
+ m_slot[1].setPosition(m_nID);
+ m_slot[1].setNo(2);
+ m_slot[1].setName("Slot 2(G1)");
+ m_slot[1].setType(MaterialsType::G1);
}
void CBonder::onTimer(UINT nTimerid)
@@ -356,16 +406,6 @@
return __super::recvIntent(pPin, pIntent);
}
- BOOL CBonder::glassWillArrive(CGlass* pGlass)
- {
- BOOL bRet = __super::glassWillArrive(pGlass);
- if (!bRet) {
- return FALSE;
- }
-
- return m_glassList.empty();
- }
-
void CBonder::setIndex(unsigned int index)
{
m_nIndex = index;
@@ -376,39 +416,6 @@
return m_nIndex;
}
- BOOL CBonder::onPreStoredJob(int port, CJobDataB* pJobDataB)
- {
- CJobDataS* pJobDataS = getJobDataS(pJobDataB->getCassetteSequenceNo(), pJobDataB->getJobSequenceNo());
- if (pJobDataS == nullptr) {
- LOGE("<CBonder-%s>onPreFetchedOutJob,找不到对应的JobDataS(CassetteSequenceNo:%d, JobSequenceNo:%d), 注意排查风险!", m_strName.c_str(),
- pJobDataB->getCassetteSequenceNo(), pJobDataB->getJobSequenceNo());
- return FALSE;
- }
-
- // 如果为空，可以进G1或G2
- // 如果有一片玻璃，当前玻璃为G1则可进G2, 当前玻璃为G2则可进G1
- BOOL bCheck = FALSE;
- Lock();
- size_t size = m_glassList.size();
- if (size == 0) {
- bCheck = TRUE;
- }
- else if (size == 1) {
- CGlass* pGlass = m_glassList.front();
- if ((pGlass->getType() == MaterialsType::G1 && pJobDataS->getMaterialsType() == (int)MaterialsType::G2)
- || (pGlass->getType() == MaterialsType::G2 && pJobDataS->getMaterialsType() == (int)MaterialsType::G1)) {
- bCheck = TRUE;
- }
- }
- Unlock();
-
- if (!bCheck) {
- LOGE("<CEquipment-%s>onPreFetchedOutJob,当前机器不满足进料条件，或已存在两片玻璃，或G2与G1不匹配，请注意风险！", m_strName.c_str());
- }
-
- return bCheck;
- }
-
int CBonder::onProcessData(CProcessData* pProcessData)
{
CEquipment::onProcessData(pProcessData);
@@ -416,28 +423,28 @@
// 检查数据，当前两片玻璃，一片为G1, 一片为G2, 且pProcessData中的id能匹配G1或G2
Lock();
- if (m_glassList.size() != 2) {
+ CGlass* pGlass1 = getGlassFromSlot(1);
+ CGlass* pGlass2 = getGlassFromSlot(2);
+ if (pGlass1 == nullptr || pGlass2 == nullptr) {
+ LOGE("<CBonder-%s>onProcessData,错误!不满足两片玻璃且分别为G1与G2的条件，请检查数据是否正确!", m_strName.c_str());
Unlock();
- LOGE("<CBonder-%s>onProcessData,绑定失败，腔体内必须有且仅有两片玻璃!", m_strName.c_str());
return -1;
}
-
- CGlass* pGlass1 = m_glassList.front();
- CGlass* pGlass2 = m_glassList.back();
- Unlock();
-
if (pGlass1->getBuddy() != nullptr || pGlass2->getBuddy() != nullptr) {
LOGE("<CBonder-%s>onProcessData,错误!玻璃较早前已被绑定，请检查数据是否正确!", m_strName.c_str());
+ Unlock();
return -1;
}
if (pGlass1->getBuddy() != nullptr || pGlass2->getBuddy() != nullptr) {
LOGE("<CBonder-%s>onProcessData,错误!玻璃较早前已被贴合，请检查数据是否正确!", m_strName.c_str());
+ Unlock();
return -1;
}
if (pGlass1->getType() == pGlass2->getType()) {
LOGE("<CBonder-%s>onProcessData,错误!两片玻璃未匹配，必须分别为G1和G2类型，请检查数据是否正确!", m_strName.c_str());
+ Unlock();
return -1;
}
@@ -445,7 +452,13 @@
pGlass2->setBuddy(pGlass1);
LOGE("<CBonder-%s>onProcessData,%s和%s已贴合!", m_strName.c_str(),
pGlass1->getID().c_str(), pGlass2->getID().c_str());
+ Unlock();
return 0;
}
+
+ int CBonder::getIndexerOperationModeBaseValue()
+ {
+ return m_nIndex == 0 ? 15000 : 20000;
+ }
}
--
Gitblit v1.9.3