1.状态指示图，目前灰色表示掉线，绿色表示在线。增加Slot的小点表示有没有料，及加工状态 。 2.增加图示

chenluhua1980

5 天以前 bc7f1c4e028e69be51079b59dae4ae5c4d43f5bb

 SourceCode/Bond/Servo/CVacuumBake.cpp

@@ -207,33 +207,34 @@

      {
         // 请求配方参数
         //CEqWriteStep* pStep = new CEqWriteStep();
         //pStep->setName(STEP_EQ_RECIPE_PARAMETER_REQ);
         //pStep->setWriteSignalDev(0xc67);
         //pStep->setDataDev(0x379b);
         //if (addStep(STEP_ID_RECIPE_PARAMETER_CMD_REPLY, pStep) != 0) {
         //   delete pStep;
         //}
         CEqWriteStep* pStep = new CEqWriteStep();
         pStep->setName(STEP_EQ_RECIPE_PARAMETER_REQ);
         pStep->setWriteSignalDev(0xc67);
         pStep->setDataDev(0x2e4b);
         if (addStep(STEP_ID_RECIPE_PARAMETER_CMD_REPLY, pStep) != 0) {
            delete pStep;
         }
      }

      {
         // recipe parameter report
         //CEqReadStep* pStep = new CEqReadStep(0x1aa54, 257 * 2,
         //   [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
         //      if (code == ROK && pszData != nullptr && size > 0) {
         //         // 此处解释配方数据
         //         short ret = decodeRecipeParameterReport(pszData, size);
         //         pStep->setReturnCode(ret);
         //      }
         //      pStep->setReturnCode(MRLRC_OK);
         //      return -1;
         //   });
         //pStep->setName(STEP_EQ_RECIPE_PARAMETER);
         //pStep->setWriteSignalDev(0xc4c);
         //pStep->setReturnDev(m_nIndex == 0 ? 0x126c : 0x1bbc);
         //if (addStep(STEP_ID_RECIPE_PARAMETER_REPORT, pStep) != 0) {
         //   delete pStep;
         //}
         CEqReadStep* pStep = new CEqReadStep(0x16a54, 257 * 2,
            [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
               CEqReadStep* pTmpStep = (CEqReadStep*)pFrom;
               if (code == ROK && pszData != nullptr && size > 0) {
                  // 此处解释配方数据
                  short ret = decodeRecipeParameterReport(pszData, size);
                  pTmpStep->setReturnCode(ret);
               }
               pTmpStep->setReturnCode(MRLRC_OK);
               return -1;
            });
         pStep->setName(STEP_EQ_RECIPE_PARAMETER);
         pStep->setWriteSignalDev(0xc4c);
         pStep->setReturnDev(0x2ec);
         if (addStep(STEP_ID_RECIPE_PARAMETER_REPORT, pStep) != 0) {
            delete pStep;
         }
      }

      // 使用CEqReadStep替换CEqJobEventStep
@@ -333,6 +334,26 @@
         }
      }

      // FAC Data Report
      addFacDataReportStep(0x16589, 0xc4d, 1);
      /*
      {
         CEqReadStep* pStep = new CEqReadStep(0x16589, 133 * 2,
            [&](void* pFrom, int code, const char* pszData, size_t size) -> int {
               if (code == ROK && pszData != nullptr && size > 0) {
                  decodeFacDataReport((CStep*)pFrom, pszData, size);
               }
               return -1;
            });
         pStep->setName(STEP_EQ_FAC_DATA_REPORT);
         pStep->setProp("Port", (void*)1);
         pStep->setWriteSignalDev(0xc4d);
         if (addStep(STEP_ID_FAC_DATA_REPORT, pStep) != 0) {
            delete pStep;
         }
      }
      */

      // process start/end report
      {
         CEqReadStep* pStep = new CEqReadStep(0x15D3F, 13 * 2,
@@ -409,4 +430,228 @@
   {
      return 30000;
   }

   int CVacuumBake::parsingParams(const char* pszData, size_t size, std::vector<CParam>& params)
   {
      ASSERT(pszData);
      if (size < 250) return 0;
      int i = 0, v;


      // 1.A_腔加热时间
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
      params.push_back(CParam("A_腔加热时间", "", this->getName().c_str(), v * 0.1f));
      i += 2;

      // 2.B_腔加热时间
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
      params.push_back(CParam("B_腔加热时间", "", this->getName().c_str(), v * 0.1f));
      i += 2;

      // 3.A_腔破真空时间
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
      params.push_back(CParam("A_腔破真空时间", "", this->getName().c_str(), v * 0.01f));
      i += 2;

      // 4.B_腔破真空时间
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
      params.push_back(CParam("B_腔破真空时间", "", this->getName().c_str(), v * 0.01f));
      i += 2;

      // 5.A_腔真空到达值
      params.push_back(CParam("A_腔真空到达值", "", this->getName().c_str(), (double)toFloat(&pszData[i])));
      i += 4;

      // 6.B_腔真空到达值
      params.push_back(CParam("B_腔真空到达值", "", this->getName().c_str(), (double)toFloat(&pszData[i])));
      i += 4;

      // 7.A_腔温控表主控温度设定
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("A_腔温控表主控温度设定", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 8.B_腔温控表主控温度设定
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("B_腔温控表主控温度设定", "", this->getName().c_str(), v * 0.1f));
      i += 4;


      return (int)params.size();
   }

   int CVacuumBake::parsingProcessData(const char* pszData, size_t size, std::vector<CParam>& params)
   {
      ASSERT(pszData);
      if (size < 250) return 0;
      int i = 0, v;


      // 1.工艺参数序号
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
      params.push_back(CParam("工艺参数序号", "", this->getName().c_str(), v));
      i += 2;

      if (v == 1) {
         // 2.A_腔加热时间
         v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
         params.push_back(CParam("A_腔加热时间", "", this->getName().c_str(), v * 0.1f));
         i += 2;

         // 3.A_腔破真空时间
         v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
         params.push_back(CParam("A_腔破真空时间", "", this->getName().c_str(), v * 0.01f));
         i += 2;

         // 4.A_腔真空到达值
         params.push_back(CParam("A_腔真空到达值", "", this->getName().c_str(), (double)toFloat(&pszData[i])));
         i += 4;

         // 5.A_腔温控表主控温度设定
         v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
         params.push_back(CParam("A_腔温控表主控温度设定", "", this->getName().c_str(), v * 0.1f));
         i += 4;
      }
      else if (v == 1) {
         // 2.B_腔加热时间
         v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
         params.push_back(CParam("B_腔加热时间", "", this->getName().c_str(), v * 0.1f));
         i += 2;

         // 3.A_腔破真空时间
         v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
         params.push_back(CParam("B_腔破真空时间", "", this->getName().c_str(), v * 0.01f));
         i += 2;

         // 4.A_腔真空到达值
         params.push_back(CParam("B_腔真空到达值", "", this->getName().c_str(), (double)toFloat(&pszData[i])));
         i += 4;

         // 5.A_腔温控表主控温度设定
         v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
         params.push_back(CParam("B_腔温控表主控温度设定", "", this->getName().c_str(), v * 0.1f));
         i += 4;
      }

      return (int)params.size();
   }

   int CVacuumBake::parsingSVData(const char* pszData, size_t size, std::vector<CParam>& params)
   {
      /*
      1   A腔工艺运行步骤   1Word   123456
         2   A腔体真空规值   FLOAT   123.456
         3   A腔温控表1当前值   2Word   12345.6
         4   A腔温控表2当前值   2Word   12345.6
         5   A腔温控表4当前值   2Word   12345.6
         6   A腔温控表5当前值   2Word   12345.6
         7   A腔温控表6当前值   2Word   12345.6
         8   A腔温控表7当前值   2Word   12345.6
         9   A腔烘烤剩余时间   1Word   12345.6
         10   B腔工艺运行步骤   1Word   123456
         11   B腔体真空规值   FLOBT   123.456
         12   B腔温控表1当前值   2Word   12345.6
         13   B腔温控表2当前值   2Word   12345.6
         14   B腔温控表4当前值   2Word   12345.6
         15   B腔温控表5当前值   2Word   12345.6
         16   B腔温控表6当前值   2Word   12345.6
         17   B腔温控表7当前值   2Word   12345.6
         18   B腔烘烤剩余时间   1Word   12345.6
   */

      ASSERT(pszData);
      if (size < 125) return 0;
      int i = 0, v;


      // 1.A腔工艺运行步骤
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
      params.push_back(CParam("A腔工艺运行步骤", "", this->getName().c_str(), v));
      i += 2;

      // 2.A腔体真空规值
      params.push_back(CParam("A腔体真空规值", "", this->getName().c_str(), (double)toFloat(&pszData[i])));
      i += 4;

      // 3.A腔温控表1当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("A腔温控表1当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 4.A腔温控表2当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("A腔温控表2当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 5.A腔温控表4当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("A腔温控表4当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 6.A腔温控表5当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("A腔温控表5当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 7.A腔温控表6当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("A腔温控表6当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 8.A腔温控表7当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("A腔温控表7当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 9.A腔烘烤剩余时间
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
      params.push_back(CParam("A腔烘烤剩余时间", "", this->getName().c_str(), v * 0.1f));
      i += 2;

      // 10.B腔工艺运行步骤
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
      params.push_back(CParam("B腔工艺运行步骤", "", this->getName().c_str(), v));
      i += 2;

      // 11.A腔体真空规值
      params.push_back(CParam("B腔体真空规值", "", this->getName().c_str(), (double)toFloat(&pszData[i])));
      i += 4;

      // 12.B腔温控表1当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("B腔温控表1当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 13.B腔温控表2当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("B腔温控表2当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 14.B腔温控表4当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("B腔温控表4当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 15.B腔温控表5当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("B腔温控表5当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 16.B腔温控表6当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("B腔温控表6当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 17.B腔温控表7当前值
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8 | (pszData[i + 2] & 0xff) << 16 | (pszData[i + 3] & 0xff) << 24;
      params.push_back(CParam("B腔温控表7当前值", "", this->getName().c_str(), v * 0.1f));
      i += 4;

      // 18.B腔烘烤剩余时间
      v = (pszData[i] & 0xff) | (pszData[i + 1] & 0xff) << 8;
      params.push_back(CParam("B腔烘烤剩余时间", "", this->getName().c_str(), v * 0.1f));
      i += 2;

      return (int)params.size();
   }
}