Merge branch 'clh' into liuyang

mrDarker

2025-06-19 ae6ef5e9343aba44b7547ecc4afab935ebdf4806

 SourceCode/Bond/Servo/CMaster.cpp

@@ -160,9 +160,9 @@
      ASSERT(pMeasurement);

      pEfem->setPort(0, pPort1);
      pEfem->setPort(1, pPort1);
      pEfem->setPort(2, pPort1);
      pEfem->setPort(3, pPort1);
      pEfem->setPort(1, pPort2);
      pEfem->setPort(2, pPort3);
      pEfem->setPort(3, pPort4);
      pEfem->setFliper(pFliper);
      pEfem->setAligner(pAligner);
      pEfem->setArmTray(0, pArmTray1);
@@ -284,7 +284,6 @@
      // Bonder1和Bonder2需要的G2就过不来了
      // 最基本的实现，可以G2和G2轮流搬送，但最好根据Bonder的需求来决定
      MaterialsType primaryType, secondaryType;
      int armNo = 1;         // 默认使用手臂2


      // 各种机器
@@ -294,7 +293,7 @@
      CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
      CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
      CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
      CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
      CVacuumBake* pVacuumBake = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
      CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
      CBonder* pBonder1 = (CBonder*)getEquipment(EQ_ID_Bonder1);
      CBonder* pBonder2 = (CBonder*)getEquipment(EQ_ID_Bonder2);
@@ -307,7 +306,7 @@
      ASSERT(pLoadPort3);
      ASSERT(pLoadPort4);
      ASSERT(pFliper);
      ASSERT(pVacuumBack);
      ASSERT(pVacuumBake);
      ASSERT(pAligner);
      ASSERT(pBonder1);
      ASSERT(pBonder2);
@@ -344,10 +343,13 @@

         // 调度逻辑处理
         else if (m_state == MASTERSTATE::RUNNING) {
            unlock();
            // LOGI("调度处理中...");
            // 检测判断robot状态
            RMDATA& rmd = pEFEM->getRobotMonitoringData();
            if (rmd.status != ROBOT_STATUS::Idle && rmd.status != ROBOT_STATUS::Run) {
               unlock();
               continue;
            }

            lock();
            if (m_pActiveRobotTask != nullptr) {
               unlock();
               // 检测到当前有正在下午的任务，确保当前任务完成或中止后继续
@@ -377,17 +379,19 @@


            // Measurement -> LoadPort
            LOGI("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"), 
               rmd.armState[1] ? _T("不可用") : _T("可用"));
            CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
            CEquipment* pEqTar[] = { pVacuumBack, pFliper };
            CEquipment* pEqTar[] = { pVacuumBake, pFliper };
            if (primaryType == MaterialsType::G2) {
               pEqTar[0] = pFliper;
               pEqTar[1] = pVacuumBack;
               pEqTar[1] = pVacuumBake;
            }
            for (int s = 0; s < 4; s++) {
               if (pEqLoadPort[s]->isEnable()
               if (!rmd.armState[0] && pEqLoadPort[s]->isEnable()
                  && pEqLoadPort[s]->getPortType() == PortType::Unloading
                  && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType, armNo);
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     goto PORT_PUT;
                  }
@@ -396,7 +400,7 @@

         PORT_PUT:
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               m_pActiveRobotTask->pick();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
@@ -408,130 +412,173 @@


            // BakeCooling ->Measurement
            m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }


            
            // BakeCooling内部
            // Bake -> Cooling
            m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }


            // Bonder -> BakeCooling
            m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            // Aligner -> Bonder
            m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType, armNo);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType, armNo);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }


            // Fliper(G2) -> Aligner
            // VacuumBake(G1) -> Aligner
            m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType, armNo);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
            // Fliper(G2) -> Bonder
            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[1] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType, armNo);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
            if (!rmd.armState[1] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }

            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }


            // LoadPort -> Fliper(G2)
            // LoadPort -> VacuumBake(G1)
            // Aligner -> Fliper(G2)
            // Aligner -> VacuumBake(G1)
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
            }

            // LoadPort -> Aligner
            for (int s = 0; s < 4; s++) {
               for (int t = 0; t < 2; t++) {
                  if (pEqLoadPort[s]->isEnable()
                     && pEqLoadPort[s]->getPortType() == PortType::Loading
                     && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
                     m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pEqTar[t], primaryType, secondaryType, armNo);
                     if (m_pActiveRobotTask != nullptr) {
                        goto PORT_GET;
                     }
               if (!rmd.armState[0] && pEqLoadPort[s]->isEnable()
                  && pEqLoadPort[s]->getPortType() == PortType::Loading
                  && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
                  m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pAligner, primaryType, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     goto PORT_GET;
                  }
               }
            }

PORT_GET:
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               m_pActiveRobotTask->pick();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
@@ -566,16 +613,13 @@

         // 读标志位
         for (auto item : m_listEquipment) {
            if (item->getID() == EQ_ID_Bonder1 ||
               item->getID() == EQ_ID_Bonder2) {
               const StationIdentifier& station = item->getStation();
               MemoryBlock& block = item->getReadBitBlock();
            const StationIdentifier& station = item->getStation();
            MemoryBlock& block = item->getReadBitBlock();

               int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
                  block.start, block.size, block.buffer);
               if (0 == nRet) {
                  item->onReceiveLBData(block.buffer, block.size);
               }
            int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
               block.start, block.size, block.buffer);
            if (0 == nRet) {
               item->onReceiveLBData(block.buffer, block.size);
            }
         }
      }
@@ -657,17 +701,24 @@
         BOOL bOk = FALSE;
         lock();
         if (m_pActiveRobotTask != nullptr) {
            if (m_pActiveRobotTask->getTarPosition() == p->getID()) {
            // 是否已经进入手臂(即取片完成),进入下一步，放片
            if (m_pActiveRobotTask->isPicking() && 
               ((m_pActiveRobotTask->getArmNo() == 1 && p->getID() == EQ_ID_ARM_TRAY1)
               || (m_pActiveRobotTask->getArmNo() == 2 && p->getID() == EQ_ID_ARM_TRAY2))
               ) {
               slot = 1;
               bOk = TRUE;
            }

            // 是否放片完成
            else if (m_pActiveRobotTask->isPlacing() &&
               m_pActiveRobotTask->getTarPosition() == p->getID()) {
               CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getTarSlot());
               if (pGlass == nullptr) {
                  bOk = TRUE;
                  slot = m_pActiveRobotTask->getTarSlot();
                  LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
               }
            }
            else if (p->getID() == EQ_ID_ARM_TRAY1 || p->getID() == EQ_ID_ARM_TRAY2) {
               slot = 1;
               bOk = TRUE;
            }
         }
         unlock();
@@ -690,21 +741,30 @@
         if (code == EDCC_FETCHOUT_JOB) {
            lock();
            if (m_pActiveRobotTask != nullptr && m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               m_pActiveRobotTask->fetchOut();
               LOGI("开始取片...");
            }
            unlock();
         }
         else if (code == EDCC_STORED_JOB) {
            lock();
            if (m_pActiveRobotTask != nullptr && m_pActiveRobotTask->getTarPosition() == p->getID()) {
            if (m_pActiveRobotTask != nullptr
               && m_pActiveRobotTask->isPicking()
               && ((m_pActiveRobotTask->getArmNo() == 1 && p->getID() == EQ_ID_ARM_TRAY1)
                  || (m_pActiveRobotTask->getArmNo() == 2 && p->getID() == EQ_ID_ARM_TRAY2))
               ) {
               LOGI("取片完成.");
               m_pActiveRobotTask->fetchOut();
               m_pActiveRobotTask->place();
            }

            else if (m_pActiveRobotTask != nullptr
               && m_pActiveRobotTask->isPlacing() 
               && m_pActiveRobotTask->getTarPosition() == p->getID()) {
               m_pActiveRobotTask->stored();
               m_pActiveRobotTask->completed();
               LOGI("放片完成...");

               // 完成此条搬送任务，但要把数据和消息上抛应用层
               unlock();



               lock();
@@ -717,7 +777,9 @@
            unlock();
         }
      };

      listener.onProcessStateChanged = [&](void* pEquipment, PROCESS_STATE state) -> void {
         LOGI("<Master>onProcessStateChanged<%d>", (int)state);
      };
      pEquipment->setListener(listener);
      pEquipment->setCcLink(&m_cclink);
      m_listEquipment.push_back(pEquipment);
@@ -789,7 +851,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("VacuumBake(G1)");
      pEquipment->setDescription("VacuumBake(G1).");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x5c00, 0x66ff);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -900,7 +962,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("BakeCooling");
      pEquipment->setDescription("BakeCooling.");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x5100, 0x5bff);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -981,42 +1043,40 @@
      CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
      CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);

      nRet = pLoadPort1->getPin("Out1")->connectPin(pFliper->getPin("In1"));
      nRet = pLoadPort1->getPin("Out")->connectPin(pAligner->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-Fliper失败");
      }
      nRet = pLoadPort2->getPin("Out1")->connectPin(pFliper->getPin("In2"));
      nRet = pLoadPort2->getPin("Out")->connectPin(pAligner->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-Fliper失败");
      }

      nRet = pLoadPort1->getPin("Out2")->connectPin(pVacuumBake->getPin("In1"));
      nRet = pAligner->getPin("Out1")->connectPin(pFliper->getPin("In"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-VacuumBake失败");
         LOGE("连接Aligner-Fliper失败");
      }
      nRet = pLoadPort2->getPin("Out2")->connectPin(pVacuumBake->getPin("In2"));
      nRet = pAligner->getPin("Out2")->connectPin(pVacuumBake->getPin("In"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-VacuumBake失败");
         LOGE("连接Aligner-VacuumBake失败");
      }

      nRet = pFliper->getPin("Out")->connectPin(pAligner->getPin("In1"));
      nRet = pFliper->getPin("Out1")->connectPin(pBonder1->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接Fliper-Aligner失败");
         LOGE("连接Fliper-Bonder1失败");
      }
      nRet = pFliper->getPin("Out2")->connectPin(pBonder2->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接Fliper-Bonder2失败");
      }

      nRet = pVacuumBake->getPin("Out")->connectPin(pAligner->getPin("In2"));
      nRet = pVacuumBake->getPin("Out1")->connectPin(pBonder1->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接VacuumBake-Aligner失败");
         LOGE("连接VacuumBake-Bonder1失败");
      }

      nRet = pAligner->getPin("Out1")->connectPin(pBonder1->getPin("In"));
      nRet = pVacuumBake->getPin("Out2")->connectPin(pBonder2->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接Aligner-Bondere1失败");
      }

      nRet = pAligner->getPin("Out2")->connectPin(pBonder2->getPin("In"));
      if (nRet < 0) {
         LOGE("连接Aligner-Bondere2失败");
         LOGE("连接VacuumBake-Bonder2失败");
      }

      nRet = pBonder1->getPin("Out")->connectPin(pBakeCooling->getPin("In1"));
@@ -1146,7 +1206,7 @@
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         pTask->setRobotTransferParam(++taskSeqNo, armNo, pSrcSlot->getPosition(),
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, armNo, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }

@@ -1167,7 +1227,7 @@
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }

@@ -1189,7 +1249,7 @@
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }

@@ -1210,7 +1270,7 @@
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }

@@ -1242,4 +1302,18 @@

      return 0;
   }

   void CMaster::setPortType(unsigned int index, BOOL enable, int type, int mode,
      int cassetteType, int transferMode, BOOL autoChangeEnable)
   {
      ASSERT(index < 4);
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4};
      CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
      pPort->localEanblePort(enable);
      pPort->localSetPortType((SERVO::PortType)type);
      pPort->localSetPortMode((SERVO::PortMode)mode);
      pPort->localSetCessetteType((SERVO::CassetteType)cassetteType);
      pPort->localSetTransferMode((SERVO::TransferMode)transferMode);
      pPort->localAutoChangeEnable(autoChangeEnable);
   }
}