1.修改连接图

LAPTOP-SNT8I5JK\Boounion

2025-06-12 92c468d386d33f5e74916a7afd290e50ce0d5d6f

 SourceCode/Bond/Servo/CMaster.cpp

@@ -284,26 +284,35 @@
      // Bonder1和Bonder2需要的G2就过不来了
      // 最基本的实现，可以G2和G2轮流搬送，但最好根据Bonder的需求来决定
      MaterialsType primaryType, secondaryType;
      int armNo = 1;         // 默认使用手臂2


      // 各种机器
      CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
      CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
      CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
      CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
      CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
      CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
      CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
      CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
      CBonder* pBonder1 = (CBonder*)getEquipment(EQ_ID_Bonder1);
      CBonder* pBonder2 = (CBonder*)getEquipment(EQ_ID_Bonder2);
      CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
      CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);

      ASSERT(pEFEM);
      ASSERT(pLoadPort1);
      ASSERT(pLoadPort2);
      ASSERT(pLoadPort3);
      ASSERT(pLoadPort4);
      ASSERT(pFliper);
      ASSERT(pVacuumBack);
      ASSERT(pAligner);
      ASSERT(pBonder1);
      ASSERT(pBonder2);
      ASSERT(pBakeCooling);
      ASSERT(pMeasurement);

      while (1) {
         // 待退出信号或时间到
@@ -367,11 +376,56 @@
            }


            // Measurement -> LoadPort
            CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
            CEquipment* pEqTar[] = { pVacuumBack, pFliper };
            if (primaryType == MaterialsType::G2) {
               pEqTar[0] = pFliper;
               pEqTar[1] = pVacuumBack;
            }
            for (int s = 0; s < 4; s++) {
               if (pEqLoadPort[s]->isEnable()
                  && pEqLoadPort[s]->getPortType() == PortType::Unloading
                  && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType, armNo);
                  if (m_pActiveRobotTask != nullptr) {
                     goto PORT_PUT;
                  }
               }
            }

         PORT_PUT:
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }


            // BakeCooling ->Measurement
            m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

				
            // BakeCooling内部
            // Bake -> Cooling
            m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
@@ -385,6 +439,7 @@
            // Bonder -> BakeCooling
            m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
@@ -396,6 +451,7 @@

            m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
@@ -406,8 +462,9 @@
            }

            // Aligner -> Bonder
            m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType);
            m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType, armNo);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
@@ -417,8 +474,9 @@
               continue;
            }

            m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType);
            m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType, armNo);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
@@ -431,8 +489,9 @@

            // Fliper(G2) -> Aligner
            // VacuumBake(G1) -> Aligner
            m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType);
            m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType, armNo);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
@@ -442,8 +501,9 @@
               continue;
            }

            m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType);
            m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType, armNo);
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
@@ -456,14 +516,22 @@

            // LoadPort -> Fliper(G2)
            // LoadPort -> VacuumBake(G1)
            CEquipment* pEqTar1 = pVacuumBack;
            CEquipment* pEqTar2 = pFliper;
            if (primaryType == MaterialsType::G2) {
               pEqTar1 = pFliper;
               pEqTar2 = pVacuumBack;
            for (int s = 0; s < 4; s++) {
               for (int t = 0; t < 2; t++) {
                  if (pEqLoadPort[s]->isEnable()
                     && pEqLoadPort[s]->getPortType() == PortType::Loading
                     && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
                     m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pEqTar[t], primaryType, secondaryType, armNo);
                     if (m_pActiveRobotTask != nullptr) {
                        goto PORT_GET;
                     }
                  }
               }
            }
            m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar1, primaryType, secondaryType);

PORT_GET:
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->run();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
@@ -472,50 +540,6 @@
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar1, primaryType, secondaryType);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }



            // LoadPort -> VacuumBake(G1)
            m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar2, primaryType, secondaryType);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar2, primaryType, secondaryType);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }


            // BakeCooling ->Measurement


            // Measurement -> LoadPort



            unlock();

@@ -957,42 +981,40 @@
      CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
      CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);

      nRet = pLoadPort1->getPin("Out1")->connectPin(pFliper->getPin("In1"));
      nRet = pLoadPort1->getPin("Out1")->connectPin(pAligner->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-Fliper失败");
      }
      nRet = pLoadPort2->getPin("Out1")->connectPin(pFliper->getPin("In2"));
      nRet = pLoadPort2->getPin("Out1")->connectPin(pAligner->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-Fliper失败");
      }

      nRet = pLoadPort1->getPin("Out2")->connectPin(pVacuumBake->getPin("In1"));
      nRet = pAligner->getPin("Out1")->connectPin(pFliper->getPin("In"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-VacuumBake失败");
         LOGE("连接Aligner-Fliper失败");
      }
      nRet = pLoadPort2->getPin("Out2")->connectPin(pVacuumBake->getPin("In2"));
      nRet = pAligner->getPin("Out2")->connectPin(pVacuumBake->getPin("In"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-VacuumBake失败");
         LOGE("连接Aligner-VacuumBake失败");
      }

      nRet = pFliper->getPin("Out")->connectPin(pAligner->getPin("In1"));
      nRet = pFliper->getPin("Out1")->connectPin(pBonder1->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接Fliper-Aligner失败");
         LOGE("连接Fliper-Bonder1失败");
      }
      nRet = pFliper->getPin("Out2")->connectPin(pBonder2->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接Fliper-Bonder2失败");
      }

      nRet = pVacuumBake->getPin("Out")->connectPin(pAligner->getPin("In2"));
      nRet = pVacuumBake->getPin("Out1")->connectPin(pBonder1->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接VacuumBake-Aligner失败");
         LOGE("连接VacuumBake-Bonder1失败");
      }

      nRet = pAligner->getPin("Out1")->connectPin(pBonder1->getPin("In"));
      nRet = pVacuumBake->getPin("Out2")->connectPin(pBonder2->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接Aligner-Bondere1失败");
      }

      nRet = pAligner->getPin("Out2")->connectPin(pBonder2->getPin("In"));
      if (nRet < 0) {
         LOGE("连接Aligner-Bondere2失败");
         LOGE("连接VacuumBake-Bonder2失败");
      }

      nRet = pBonder1->getPin("Out")->connectPin(pBakeCooling->getPin("In1"));
@@ -1105,7 +1127,8 @@

   static int taskSeqNo = 0;
   CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq,
      MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/)
      MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
      int armNo/* = 1*/)
   {
      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
@@ -1120,7 +1143,8 @@
      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         pTask->setRobotTransferParam(++taskSeqNo, armNo, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }

@@ -1140,6 +1164,7 @@
      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }
@@ -1161,6 +1186,7 @@
      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }
@@ -1168,4 +1194,50 @@

      return pTask;
   }

   CRobotTask* CMaster::createTransferTask_bakecooling_to_measurement(CEquipment* pSrcEq, CEquipment* pTarEq)
   {
      std::vector<int> slots = { 3, 4 };

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G1);
      pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   int CMaster::abortCurrentTask()
   {
      lock();
      if (m_pActiveRobotTask != nullptr) {
         m_pActiveRobotTask->abort();
      }
      unlock();

      if (m_listener.onRobotTaskEvent != nullptr) {
         m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_ABORT);
      }

      lock();
      if (m_pActiveRobotTask != nullptr) {
         delete m_pActiveRobotTask;
         m_pActiveRobotTask = nullptr;
      }
      unlock();

      // 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
      stop();

      return 0;
   }
}