1.修复打开软件加载CControlJob时，玻璃context丢失的问题；

LAPTOP-SNT8I5JK\Boounion

2025-09-19 81df82be1f5f401b80780f65e5811685d9a8e4c4

 SourceCode/Bond/Servo/CMaster.cpp

@@ -53,7 +53,7 @@
      m_ullRunTime = 0;
      m_state = MASTERSTATE::READY;
      m_pActiveRobotTask = nullptr;
      m_nLastError = 0;
      m_nLastError = ER_CODE_NOERROR;
      m_isCompareMapsBeforeProceeding = FALSE;
      m_bJobMode = FALSE;
      m_bEnableEventReport = true;
@@ -62,6 +62,8 @@
      m_bBatch = false;
      m_nContinuousTransferCount = 0;
      m_nContinuousTransferStep = CTStep_Unknow;
      m_nContinuousWorkingPort = 0;
      m_nContinuousWorkingSlot = 0;
      m_pControlJob = nullptr;
      m_nTestFlag = 0;
      InitializeCriticalSection(&m_criticalSection);
@@ -211,10 +213,9 @@




		
      // 读缓存数据
      readCache();
      loadState();


      // 定时器
@@ -307,7 +308,7 @@
      return 0;
   }

   int CMaster::stop()
   int CMaster::stop(int nErCode/* = ER_CODE_NOERROR*/)
   {
      // 运行时间为累加结果，本次停止时刷新；
      lock();
@@ -321,6 +322,7 @@


      // 更新状态
      m_nLastError = nErCode;
      setState(MASTERSTATE::STOPPING);


@@ -423,6 +425,7 @@
               });
            if (nRet != 0) {
               LOGE("<Master>EFEM切换Start状态失败");
               m_nLastError = ER_CODE_OPERATION_MODE_FAIL;
               m_strLastError = "EFEM切换Start状态失败.";
               goto WAIT;
            }
@@ -436,6 +439,7 @@
               });
            if (nRet != 0) {
               LOGE("<Master>Bonder1切换Start状态失败");
               m_nLastError = ER_CODE_BONDER_OPERATION_MODE_FAIL;
               m_strLastError = "Bonder1切换Start状态失败.";
               goto WAIT;
            }
@@ -449,6 +453,7 @@
               });
            if (nRet != 0) {
               LOGE("<Master>Bonder2切换Start状态失败");
               m_nLastError = ER_CODE_BONDER_OPERATION_MODE_FAIL;
               m_strLastError = "Bonder2切换Start状态失败.";
               goto WAIT;
            }
@@ -462,6 +467,7 @@
               });
            if (nRet != 0) {
               LOGE("<Master>BakeCooling切换Start状态失败");
               m_nLastError = ER_CODE_OPERATION_MODE_FAIL;
               m_strLastError = "BakeCooling切换Start状态失败.";
               goto WAIT;
            }
@@ -475,6 +481,7 @@
               });
            if (nRet != 0) {
               LOGE("<Master>VacuumBake切换Start状态失败");
               m_nLastError = ER_CODE_OPERATION_MODE_FAIL;
               m_strLastError = "VacuumBake切换Start状态失败.";
               goto WAIT;
            }
@@ -488,6 +495,7 @@
               });
            if (nRet != 0) {
               LOGE("<Master>Measurement切换Start状态失败");
               m_nLastError = ER_CODE_OPERATION_MODE_FAIL;
               m_strLastError = "Measurement切换Start状态失败.";
               goto WAIT;
            }
@@ -546,6 +554,7 @@
                  });
               if (nRet != 0) {
                  LOGE("<Master>%s切换Stop状态发送失败", pEq[i]->getName().c_str());
                  m_nLastError = ER_CODE_OPERATION_MODE_FAIL;
                  m_strLastError = pEq[i]->getName() + "切换Stop状态发送失败.";
                  bIomcOk[i] = FALSE;
                  promises[i].set_value(); // 避免 wait 阻塞
@@ -570,7 +579,11 @@
            }

            LOGI("<Master>所有设备成功切换到 Stop 模式");
            setState(MASTERSTATE::READY);
            if(m_nLastError == ER_CODE_NOERROR)
               setState(MASTERSTATE::READY);
            else
               setState(MASTERSTATE::ATHERERROR);

            continue;
         }

@@ -774,6 +787,8 @@
                        continue;
                     }

                     pGlass->queue();
                     pGlass->start();
                     pEFEM->setContext(m_pActiveRobotTask->getContext());
                     goto PORT_GET;
                  }
@@ -1050,15 +1065,17 @@
            }

            // Measurement -> LoadPort
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
            for (int p = 0; p < 4; p++) {
               if (p != m_nContinuousWorkingPort) continue;
               PortType pt = pLoadPorts[p]->getPortType();
               if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_Measurement)
                  && !rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && !rmd.armState[0] && pLoadPorts[p]->isEnable()
                  && (pt == PortType::Unloading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  && pLoadPorts[p]->getPortStatus() == PORT_INUSE) {
                  for (int slot = 0; slot < SLOT_MAX; slot++) {
                     if (slot != m_nContinuousWorkingSlot) continue;
                     m_pActiveRobotTask = createTransferTask_continuous_transfer(pMeasurement,
                        0, pLoadPorts[s], slot);
                        0, pLoadPorts[p], slot);
                     if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_Measurement_LoadPort;
                        m_nContinuousTransferStep = CTStep_end;
@@ -1190,17 +1207,19 @@
            }

            // LoadPort -> Aligner
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
            for (int p = 0; p < 4; p++) {
               PortType pt = pLoadPorts[p]->getPortType();
               if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_end)
                  && !rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && !rmd.armState[0] && pLoadPorts[p]->isEnable()
                  && (pt == PortType::Loading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  && pLoadPorts[p]->getPortStatus() == PORT_INUSE) {
                  for (int slot = 0; slot < SLOT_MAX; slot++) {
                     m_pActiveRobotTask = createTransferTask_continuous_transfer(pLoadPorts[s], 
                     m_pActiveRobotTask = createTransferTask_continuous_transfer(pLoadPorts[p], 
                        slot, pAligner, 0);
                     if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_LoadPort_Aligner;
                        m_nContinuousWorkingPort = p;
                        m_nContinuousWorkingSlot = slot;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(LoadPort -> Aligner)...");
                        pEFEM->setContext(m_pActiveRobotTask->getContext());
                        goto CT_PORT_GET;
@@ -1449,6 +1468,8 @@
               if (m_pActiveRobotTask->getSrcPosition() == EQ_ID_MEASUREMENT) {
                  CGlass* pGlass = (CGlass*)m_pActiveRobotTask->getContext();
                  pGlass->complete();
                  CGlass* pBuddy = pGlass->getBuddy();
                  if (pBuddy != nullptr) pBuddy->complete();
                  this->saveState();
                  bool bMoved = glassFromInPorcessToComplete(pGlass);
                  if (bMoved) {
@@ -1571,6 +1592,25 @@
            strOut.append(szBuffer);
         }
         LOGD("<CMaster-%s>SVDataReport:%s", ((CEquipment*)pEquipment)->getName().c_str(), strOut.c_str());
      };
      listener.onPanelDataReport = [&](void* pEquipment, void* pContext) {
         LOGD("<CMaster-%s>onPanelDataReport", ((CEquipment*)pEquipment)->getName().c_str());

         CEquipment* pEq = (CEquipment*)pEquipment;
         CGlass* pGlass = (CGlass*)pContext;

         // 如果AOI检测失败，要停机
         if (pEq->getID() == EQ_ID_MEASUREMENT) {
            LOGD("<CMaster-%s>onPanelDataReport 01", ((CEquipment*)pEquipment)->getName().c_str());
            if (pGlass->getAOIInspResult() == InspResult::Fail) {
               LOGD("<CMaster-%s>onPanelDataReport 02", ((CEquipment*)pEquipment)->getName().c_str());
               if (stop() == 0) {
                  m_nLastError = ER_CODE_AOI_NG;
                  m_strLastError = "AOI检测未通过.";
               }
            }
         }

      };
      pEquipment->setListener(listener);
      pEquipment->setCcLink(&m_cclink);
@@ -1832,6 +1872,8 @@
         if (!m_inProcesGlasses.empty()) {
            CGlass* pGlass = m_inProcesGlasses.front();
            pGlass->complete();
            CGlass* pBuddy = pGlass->getBuddy();
            if (pBuddy != nullptr) pBuddy->complete();
            glassFromInPorcessToComplete(pGlass);
            this->saveState();

@@ -2039,7 +2081,7 @@
      pTarSlot = pTarEq->getAvailableSlotForGlass(primaryType);
      pSrcSlot = pSrcEq->getProcessedSlot(primaryType, bJobMode);
      if (m_nTestFlag == 1) LOGD("createTransferTask 003 %x, %x", pTarSlot, pSrcSlot);
      if (pSrcSlot == nullptr || nullptr == pTarSlot && secondaryType != SERVO::MaterialsType::G0) {
      if ((pSrcSlot == nullptr || nullptr == pTarSlot) && secondaryType != SERVO::MaterialsType::G0) {
         pTarSlot = pTarEq->getAvailableSlotForGlass(secondaryType);
         pSrcSlot = pSrcEq->getProcessedSlot(secondaryType, bJobMode);
      }
@@ -2278,6 +2320,22 @@
      pPort->localEanblePort(bEnable);
   }

   int CMaster::getPortCassetteSnSeed(int port)
   {
      ASSERT(1 <= port && port <= 4);
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
      CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[port - 1]);
      return pPort->getPortCassetteSnSeed();
   }

   void CMaster::setPortCassetteSnSeed(int port, int seed)
   {
      ASSERT(1 <= port && port <= 4);
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
      CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[port - 1]);
      return pPort->setPortCassetteSnSeed(seed);
   }

   void CMaster::setCompareMapsBeforeProceeding(BOOL bCompare)
   {
      m_isCompareMapsBeforeProceeding = bCompare;
@@ -2350,8 +2408,31 @@
            temp.push_back(p);
         }
      }

      m_processJobs = temp;


      // 更新context
      std::vector<uint8_t> newSlots;
      std::vector<void*> newContexts;
      for (auto pj : m_processJobs) {
         for (auto& c : pj->carriers()) {
            auto pPort = getPortWithCarrierId(c.carrierId);
            if (pPort == nullptr) continue;

            for (auto s : c.slots) {
               auto pGlass = pPort->getGlassFromSlot(s);
               if (pGlass == nullptr) continue;

               newSlots.push_back(s);
               newContexts.push_back(pGlass);
            }

            pj->setCarrierSlotsAndContexts(c.carrierId, newSlots, newContexts);
         }
      }



      this->saveState();

      return (int)m_processJobs.size();
@@ -2494,13 +2575,9 @@
      return true;
   }

   bool CMaster::loadState(const std::string& path)
   bool CMaster::loadState()
   {
      // 保存文件路径
      m_strStatePath = path;


      std::ifstream ifs(path, std::ios::binary);
      std::ifstream ifs(m_strStatePath, std::ios::binary);
      if (!ifs) return false;

      // 文件头
@@ -2553,10 +2630,33 @@
      m_pControlJob->setPJs(tempPjs);


      // 更新contexts
      auto pjs = m_pControlJob->getPjs();
      for (auto pj : pjs) {
         for (auto& c : pj->carriers()) {
            auto p = getPortWithCarrierId(c.carrierId);
            if (p == nullptr) continue;

            std::vector<void*> contexts;
            for (auto s : c.slots) {
               auto g = getGlass(p->getIndex(), s - 1);
               if (g == nullptr) continue;
               contexts.push_back(g);
            }
            pj->setCarrierContexts(c.carrierId, contexts);
         }
      }


      // 如果版本升级，可在这里判断 version 来加载新字段


      return true;
   }

   void CMaster::setStateFile(const std::string& path)
   {
      m_strStatePath = path;
   }

   CProcessJob* CMaster::acquireNextProcessJob()
@@ -2699,6 +2799,50 @@
      return nullptr;
   }


   bool CMaster::completeControlJob(std::string description)
   {
      if (m_pControlJob == nullptr || m_state != SERVO::MASTERSTATE::READY) {
         return false;
      }
      for (auto item : m_processJobs) {
         item->abort(description);
      }
      m_pControlJob->abort(description);


      // 释放Job相关
      for (auto item : m_processJobs) {
         delete item;
      }
      m_processJobs.clear();
      if (m_pControlJob != nullptr) {
         delete m_pControlJob;
         m_pControlJob = nullptr;
      }

      saveState();

      return true;
   }

   bool CMaster::canCreateControlJob()
   {
      return m_pControlJob == nullptr;
   }

   bool CMaster::canCompleteControlJob()
   {
      return m_pControlJob != nullptr && m_state == SERVO::MASTERSTATE::READY;
   }

   bool CMaster::canDeleteControlJob()
   {
      return m_pControlJob != nullptr 
         && m_pControlJob->state() == CJState::NoState
         && m_state == SERVO::MASTERSTATE::READY;
   }

   int CMaster::getWipGlasses(std::vector<CGlass*>& glasses)
   {
      for (auto eq : m_listEquipment) {
@@ -2711,4 +2855,83 @@

      return (int)glasses.size();
   }

   int CMaster::getLastError()
   {
      return m_nLastError;
   }

   std::string& CMaster::getLastErrorText()
   {
      return m_strLastError;
   }

   void CMaster::test()
   {
      if (stop() == 0) {
         m_nLastError = ER_CODE_AOI_NG;
         m_strLastError = "AOI检测未通过.";
      }
   }

   bool CMaster::moveGlassToBuf(int eqid, int slotNo)
   {
      CEquipment* pEquipment = getEquipment(eqid);
      if (pEquipment == nullptr) return false;

      CSlot* pSlot = pEquipment->getSlotWithNo(slotNo);
      if (pSlot == nullptr) return false;

      CGlass* pGlass = (CGlass*)pSlot->getContext();
      m_bufGlass.push_back(pGlass);
      pGlass->addRef();
      pSlot->setContext(nullptr);

      m_bDataModify = TRUE;
      if (m_listener.onEqDataChanged != nullptr) {
         m_listener.onEqDataChanged(this, pEquipment, 0);
      }

      return true;
   }

   bool CMaster::moveGlassToSlot(int eqid, int slotNo)
   {
      CEquipment* pEquipment = getEquipment(eqid);
      if (pEquipment == nullptr) return false;

      CSlot* pSlot = pEquipment->getSlotWithNo(slotNo);
      if (pSlot == nullptr) return false;
      if (m_bufGlass.empty()) return false;

      CGlass* pGlass = m_bufGlass.front();
      m_bufGlass.pop_front();
      if (pGlass == nullptr) return false;
      pSlot->setContext(pGlass);
      pGlass->release();

      m_bDataModify = TRUE;
      if (m_listener.onEqDataChanged != nullptr) {
         m_listener.onEqDataChanged(this, pEquipment, 0);
      }

      return true;
   }

   CGlass* CMaster::getGlass(int scrPort, int scrSlot)
   {
      for (auto eq : m_listEquipment) {
         std::vector<CGlass*> glasses;
         eq->getAllGlass(glasses);
         for (auto g : glasses) {
            int p, s;
            g->getOrginPort(p, s);
            if (p == scrPort && s == scrSlot) {
               return g;
            }
         }
      }

      return nullptr;
   }
}