1.Panel Start/Panel End事件上报功能实现，EAP模拟器接收数据并验证；

LAPTOP-SNT8I5JK\Boounion

2025-08-26 73f93ffcc9f292e6b17c51fbf4d7cda42356a16d

 SourceCode/Bond/Servo/CMaster.cpp

@@ -1,6 +1,11 @@
#include "stdafx.h"
#include "Common.h"
#include "CMaster.h"
#include <future>
#include <vector>
#include "RecipeManager.h"
#include <fstream>
#include "SerializeUtil.h"


namespace SERVO {
@@ -48,11 +53,31 @@
      m_ullRunTime = 0;
      m_state = MASTERSTATE::READY;
      m_pActiveRobotTask = nullptr;
      m_nLastError = 0;
      m_isCompareMapsBeforeProceeding = FALSE;
      m_bJobMode = FALSE;
      m_bEnableEventReport = true;
      m_bEnableAlarmReport = true;
      m_bContinuousTransfer = false;
      m_bBatch = false;
      m_nContinuousTransferCount = 0;
      m_nContinuousTransferStep = CTStep_Unknow;
      m_pControlJob = nullptr;
      InitializeCriticalSection(&m_criticalSection);
   }

   CMaster::~CMaster()
   {
      // 释放Job相关
      for (auto item : m_processJobs) {
         delete item;
      }
      m_processJobs.clear();
      if (m_pControlJob != nullptr) {
         delete m_pControlJob;
         m_pControlJob = nullptr;
      }

      if (m_hEventReadBitsThreadExit[0] != nullptr) {
         ::CloseHandle(m_hEventReadBitsThreadExit[0]);
         m_hEventReadBitsThreadExit[0] = nullptr;
@@ -160,9 +185,9 @@
      ASSERT(pMeasurement);

      pEfem->setPort(0, pPort1);
      pEfem->setPort(1, pPort1);
      pEfem->setPort(2, pPort1);
      pEfem->setPort(3, pPort1);
      pEfem->setPort(1, pPort2);
      pEfem->setPort(2, pPort3);
      pEfem->setPort(3, pPort4);
      pEfem->setFliper(pFliper);
      pEfem->setAligner(pAligner);
      pEfem->setArmTray(0, pArmTray1);
@@ -245,6 +270,36 @@
         return -1;
      }

      m_bContinuousTransfer = false;
      m_bBatch = false;
      setState(MASTERSTATE::STARTING);
      m_ullStartTime = GetTickCount64();

      return 0;
   }

   int CMaster::startContinuousTransfer()
   {
      if (m_state != MASTERSTATE::READY) {
         return -1;
      }

      m_bContinuousTransfer = true;
      m_bBatch = false;
      setState(MASTERSTATE::STARTING);
      m_ullStartTime = GetTickCount64();

      return 0;
   }

   int CMaster::startBatch()
   {
      if (m_state != MASTERSTATE::READY) {
         return -1;
      }

      m_bContinuousTransfer = false;
      m_bBatch = true;
      setState(MASTERSTATE::STARTING);
      m_ullStartTime = GetTickCount64();

@@ -254,19 +309,43 @@
   int CMaster::stop()
   {
      // 运行时间为累加结果，本次停止时刷新；
      if (m_state != MASTERSTATE::RUNNING) {
      lock();
      if (m_state != MASTERSTATE::RUNNING && m_state != MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER
         && m_state != MASTERSTATE::RUNNING_BATCH) {
         unlock();
         return -1;
      }

      m_ullRunTime += (GetTickCount64() - m_ullStartTime);
      unlock();


      // 更新状态
      setState(MASTERSTATE::STOPPING);


      // ControlJob暂停
      lock();
      if (m_pControlJob != nullptr) {
         m_pControlJob->pause();
         saveState();
      }
      unlock();


      return 0;
   }

   void CMaster::clearError()
   {
      m_nLastError = 0;
      m_strLastError = "";
      setState(MASTERSTATE::READY);
   }

   ULONGLONG CMaster::getRunTime()
   {
      if (m_state == MASTERSTATE::RUNNING)
      if (m_state == MASTERSTATE::RUNNING || m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER
         || m_state == MASTERSTATE::RUNNING_BATCH)
         return m_ullRunTime + (GetTickCount64() - m_ullStartTime);
      else
         return m_ullRunTime;
@@ -287,26 +366,37 @@


      // 各种机器
      CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
      CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
      CLoadPort* pLoadPorts[4];
      CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
      pLoadPorts[0] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
      pLoadPorts[1] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
      pLoadPorts[2] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
      pLoadPorts[3] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
      CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
      CVacuumBake* pVacuumBack = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
      CVacuumBake* pVacuumBake = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
      CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
      CBonder* pBonder1 = (CBonder*)getEquipment(EQ_ID_Bonder1);
      CBonder* pBonder2 = (CBonder*)getEquipment(EQ_ID_Bonder2);
      CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
      CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);

      ASSERT(pLoadPort1);
      ASSERT(pLoadPort2);
      ASSERT(pEFEM);
      ASSERT(pLoadPorts[0]);
      ASSERT(pLoadPorts[1]);
      ASSERT(pLoadPorts[2]);
      ASSERT(pLoadPorts[3]);
      ASSERT(pFliper);
      ASSERT(pVacuumBack);
      ASSERT(pVacuumBake);
      ASSERT(pAligner);
      ASSERT(pBonder1);
      ASSERT(pBonder2);
      ASSERT(pBakeCooling);
      ASSERT(pMeasurement);

      while (1) {
         // 待退出信号或时间到
         HANDLE hEvents[] = { m_hEventDispatchThreadExit[0], m_hDispatchEvent };
         int nRet = WaitForMultipleObjects(2, hEvents, FALSE, 1000);
         int nRet = WaitForMultipleObjects(2, hEvents, FALSE, 500);
         if (nRet == WAIT_OBJECT_0) {
            break;
         }
@@ -315,9 +405,122 @@
         // 如果状态为STARTING，开始工作并切换到RUNNING状态
         lock();
         if (m_state == MASTERSTATE::STARTING) {
            // 发送indexerOperationModeChange到各个机台，成功后切换到RUNNING状态
            // 否则切换到MSERROR状态
            int nRet;
            CEquipment* pEq[6] = { pEFEM, pBonder1, pBonder2, pBakeCooling, 
               pVacuumBake, pMeasurement};
            BOOL bIomcOk[7] = {FALSE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE};
            std::vector<std::promise<void>> promises(6);
            std::vector<std::future<void>> futures;

            nRet = pEq[0]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[0] = retCode == (int)RET::OK;
                  promises[0].set_value();
                  TRACE("a0001\n", writeCode, retCode);
               });
            if (nRet != 0) {
               LOGI("<Master>EFEM切换Start状态失败");
               m_strLastError = "EFEM切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[0].get_future());
            /*
            nRet = pEq[1]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[1] = retCode == (int)RET::OK;
                  promises[1].set_value();
                  TRACE("a0002\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Bonder1切换Start状态失败");
               m_strLastError = "Bonder1切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[1].get_future());

            nRet = pEq[2]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[2] = retCode == (int)RET::OK;
                  promises[2].set_value();
                  TRACE("a0003\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Bonder2切换Start状态失败");
               m_strLastError = "Bonder2切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[2].get_future());

            nRet = pEq[3]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[3] = retCode == (int)RET::OK;
                  promises[3].set_value();
                  TRACE("a0004\n");
               });
            if (nRet != 0) {
               LOGI("<Master>BakeCooling切换Start状态失败");
               m_strLastError = "BakeCooling切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[3].get_future());

            nRet = pEq[4]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[4] = retCode == (int)RET::OK;
                  promises[4].set_value();
                  TRACE("a0005\n");
               });
            if (nRet != 0) {
               LOGI("<Master>VacuumBake切换Start状态失败");
               m_strLastError = "VacuumBake切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[4].get_future());

            nRet = pEq[5]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[5] = retCode == (int)RET::OK;
                  promises[5].set_value();
                  TRACE("a0006\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Measurement切换Start状态失败");
               m_strLastError = "Measurement切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[5].get_future());
            */

WAIT:
            for (auto& f : futures) {
               f.wait();  // 阻塞等待对应设备完成
            }
            for (int i = 0; i < 6; i++) {
               if (!bIomcOk[i]) {
                  bIomcOk[6] = FALSE;
                  LOGI("<Master>%s切换Start状态失败", pEq[i]->getName().c_str());
               }
            }
				
            // 检查看是否都已经切换到START状态
            /*
            if (!bIomcOk[6]) {
               unlock();
               setState(MASTERSTATE::MSERROR);
               continue;
            }
            */

            unlock();
            Sleep(1000);
            setState(MASTERSTATE::RUNNING);
            if(m_bContinuousTransfer)
               setState(MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER);
            else if (m_bBatch)
               setState(MASTERSTATE::RUNNING_BATCH);
            else
               setState(MASTERSTATE::RUNNING);

            continue;
         }

@@ -325,7 +528,49 @@
         // 处理完成当前事务后，切换到停止或就绪状态
         else if (m_state == MASTERSTATE::STOPPING) {
            unlock();
            Sleep(1000);
            LOGI("<Master>开始切换各设备到 Stop 模式...");

            std::vector<std::promise<void>> promises(6);
            std::vector<std::future<void>> futures;
            BOOL bIomcOk[7] = { FALSE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE };

            int nRet;
            CEquipment* pEq[6] = { pEFEM, pBonder1, pBonder2, pBakeCooling,
               pVacuumBake, pMeasurement };

            for (int i = 0; i < 1; ++i) {
               nRet = pEq[i]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Stop,
                  [i, &promises, &bIomcOk](int writeCode, int retCode) -> void {
                     bIomcOk[i] = retCode == (int)RET::OK;
                     promises[i].set_value();
                     TRACE("s000%d: ret=%d\n", i + 1, retCode);
                  });
               if (nRet != 0) {
                  LOGI("<Master>%s切换Stop状态发送失败", pEq[i]->getName().c_str());
                  m_strLastError = pEq[i]->getName() + "切换Stop状态发送失败.";
                  bIomcOk[i] = FALSE;
                  promises[i].set_value(); // 避免 wait 阻塞
               }
               futures.push_back(promises[i].get_future());
            }

            for (auto& f : futures) {
               f.wait();  // 等待所有完成
            }

            for (int i = 0; i < 6; ++i) {
               if (!bIomcOk[i]) {
                  bIomcOk[6] = FALSE;
                  LOGI("<Master>%s切换Stop状态失败", pEq[i]->getName().c_str());
               }
            }

            if (!bIomcOk[6]) {
               setState(MASTERSTATE::MSERROR);
               continue;
            }

            LOGI("<Master>所有设备成功切换到 Stop 模式");
            setState(MASTERSTATE::READY);
            continue;
         }
@@ -333,11 +578,17 @@

         // 调度逻辑处理
         else if (m_state == MASTERSTATE::RUNNING) {
            unlock();
            // LOGI("调度处理中...");
            // 检测判断robot状态
            RMDATA& rmd = pEFEM->getRobotMonitoringData();
            if (rmd.status != ROBOT_STATUS::Idle && rmd.status != ROBOT_STATUS::Run) {
               unlock();
               continue;
            }

            lock();
            if (m_pActiveRobotTask != nullptr) {
               if (m_pActiveRobotTask->isPicked()) {
                  m_pActiveRobotTask->place();
               }
               unlock();
               // 检测到当前有正在下午的任务，确保当前任务完成或中止后继续
               // LOGI("检测到当前有正在下午的任务，确保当前任务完成或中止后继续...");
@@ -365,125 +616,552 @@
            }



            // Aligner -> Bonder
            m_pActiveRobotTask = createTransferTask(pAligner, pBonder1, primaryType, secondaryType);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
            // Measurement -> LoadPort
            if (rmd.armState[0] || rmd.armState[1]) {
               LOGI("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"),
                  rmd.armState[1] ? _T("不可用") : _T("可用"));
            }
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Unloading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], primaryType, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     goto PORT_PUT;
                  }
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            m_pActiveRobotTask = createTransferTask(pAligner, pBonder2, primaryType, secondaryType);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
         PORT_PUT:
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            // Measurement NG -> LoadPort
            // NG回原位
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_restore(pMeasurement, pLoadPorts);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Fliper(G2) -> Aligner
            // VacuumBake(G1) -> Aligner
            m_pActiveRobotTask = createTransferTask(pFliper, pAligner, primaryType, secondaryType);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            // BakeCooling ->Measurement
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            m_pActiveRobotTask = createTransferTask(pVacuumBack, pAligner, primaryType, secondaryType);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }


            // LoadPort -> Fliper(G2)
            // LoadPort -> VacuumBake(G1)
            CEquipment* pEqTar1 = pVacuumBack;
            CEquipment* pEqTar2 = pFliper;
            if (primaryType == MaterialsType::G2) {
               pEqTar1 = pFliper;
               pEqTar2 = pVacuumBack;
            }
            m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar1, primaryType, secondaryType);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar1, primaryType, secondaryType);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }



            // LoadPort -> VacuumBake(G1)
            m_pActiveRobotTask = createTransferTask(pLoadPort1, pEqTar2, primaryType, secondaryType);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            m_pActiveRobotTask = createTransferTask(pLoadPort2, pEqTar2, primaryType, secondaryType);
            if (m_pActiveRobotTask != nullptr) {
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 0);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
				
            // BakeCooling内部
            // Bake -> Cooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Bonder -> BakeCooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // BakeCooling ->Measurement
            // Fliper(G2) -> Bonder
            auto pSrcSlot = pVacuumBake->getProcessedSlot(primaryType);
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Measurement -> LoadPort
            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Aligner -> Fliper(G2)
            // Aligner -> VacuumBake(G1)
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Aligner -> LoadPort
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_restore(pAligner, pLoadPorts);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // LoadPort -> Aligner
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Loading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pLoadPorts[s], pAligner, primaryType, secondaryType, 1, m_bJobMode);
                  if (m_pActiveRobotTask != nullptr) {
                     pEFEM->setContext(m_pActiveRobotTask->getContext());
                     goto PORT_GET;
                  }
               }
            }

PORT_GET:
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            unlock();

            continue;
         }

         // 批处理模式，最终以此为准，但先保留之前的单片模式
         else if (m_state == MASTERSTATE::RUNNING_BATCH) {
            // 首选检查有没有CControlJob, 状态等
            if (m_pControlJob == nullptr) {
               unlock();
               continue;
            }
            CJState state = m_pControlJob->state();
            if (state == CJState::Completed || state == CJState::Aborted || state == CJState::Failed) {
               // ConrolJpb已完成
               LOGI("<Master>ControlJob已经完成或失败中断");
               unlock();
               continue;
            }


            if (m_pControlJob->state() == CJState::NoState) {
               LOGI("<Master>ControlJob已经进入列队");
               m_pControlJob->queue();
            }
            if (m_pControlJob->state() == CJState::Queued) {
               LOGI("<Master>ControlJob已经启动");
               m_pControlJob->start();
            }
            if (m_pControlJob->state() == CJState::Paused) {
               LOGI("<Master>ControlJob已经恢复运行");
               m_pControlJob->resume();
            }


            // 如果当前未选择CProcessJob, 选择一个
            if (m_inProcesJobs.empty()) {
               auto pj = acquireNextProcessJob();
               if (pj != nullptr) {
                  m_inProcesJobs.push_back(pj);

                  // 这里上报PJ Start事件
                  if (m_listener.onPjStart != nullptr) {
                     m_listener.onPjStart(this, pj);
                  }
               }
            }
            if (m_inProcesJobs.empty()) {
               LOGI("<Master>选择当前ProcessJob失败！");
               unlock();
               continue;
            }

            // 如果当前没有Glass, 选择
            if (m_queueGlasses.empty()) {
               int nCount = acquireGlassToQueue();
               LOGI("<Master>已加入 %d 块Glass到工艺列队！", nCount);
            }


            // 检测判断robot状态
            RMDATA& rmd = pEFEM->getRobotMonitoringData();
            if (rmd.status != ROBOT_STATUS::Idle && rmd.status != ROBOT_STATUS::Run) {
               unlock();
               continue;
            }

            if (m_pActiveRobotTask != nullptr) {
               if (m_pActiveRobotTask->isPicked()) {
                  m_pActiveRobotTask->place();
               }
               unlock();
               // 检测到当前有正在下午的任务，确保当前任务完成或中止后继续
               // LOGI("检测到当前有正在下午的任务，确保当前任务完成或中止后继续...");
               continue;
            }


            // 此处检测优先类型和次要类型（G1或G2）
            // 如果其中一Bonder有单个玻璃，优先取它的配对类型，否则无所谓了
            primaryType = MaterialsType::G1;
            secondaryType = MaterialsType::G2;
            if ((!pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
               && (!pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
               // 如果G1和G2都满了，那就看Aligner, 如果Aligner有玻璃为G1, 则取G2
               CGlass* pGlass = pAligner->getGlassFromSlot(1);
               if (pGlass != nullptr && pGlass->getType() == MaterialsType::G1) {
                  primaryType = MaterialsType::G2;
                  secondaryType = MaterialsType::G1;
               }
            }
            else if ((pBonder1->canPlaceGlassInSlot(0) && !pBonder1->canPlaceGlassInSlot(1))
               || (pBonder2->canPlaceGlassInSlot(0) && !pBonder2->canPlaceGlassInSlot(1))) {
               primaryType = MaterialsType::G2;
               secondaryType = MaterialsType::G1;
            }


            // Measurement -> LoadPort
            if (rmd.armState[0] || rmd.armState[1]) {
               LOGI("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"),
                  rmd.armState[1] ? _T("不可用") : _T("可用"));
            }
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Unloading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], primaryType, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     goto BATCH_PORT_PUT;
                  }
               }
            }

         BATCH_PORT_PUT:
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            // Measurement NG -> LoadPort
            // NG回原位
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_restore(pMeasurement, pLoadPorts);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // BakeCooling ->Measurement
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // BakeCooling内部
            // Bake -> Cooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Bonder -> BakeCooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Fliper(G2) -> Bonder
            auto pSrcSlot = pVacuumBake->getProcessedSlot(primaryType);
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Aligner -> Fliper(G2)
            // Aligner -> VacuumBake(G1)
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Aligner -> LoadPort
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_restore(pAligner, pLoadPorts);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // LoadPort -> Aligner
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Loading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pLoadPorts[s], pAligner, primaryType, secondaryType, m_bJobMode);
                  if (m_pActiveRobotTask != nullptr) {
                     CGlass* pGlass = (CGlass*)m_pActiveRobotTask->getContext();
                     pEFEM->setContext(pGlass);
                     pGlass->start();
                     bool bMoved = glassFromQueueToInPorcess(pGlass);
                     if (bMoved) {
                        LOGI("<Master>Glass(%s)从等待列队到工艺列队转移成功.",
                           pGlass->getID().c_str());
                     }
                     else {
                        LOGE("<Master>Glass(%s)从等待列队到工艺列队转移失败.",
                           pGlass->getID().c_str());
                     }

                     // 这里上报Panel Start事件
                     if (m_listener.onPanelStart != nullptr) {
                        m_listener.onPanelStart(this, pGlass);
                     }

                     goto BATCH_PORT_GET;
                  }
               }
            }

         BATCH_PORT_GET:
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            unlock();
            continue;
         }

         // 千传模式调度逻辑
         else if (m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER) {
            // 检测判断robot状态
            RMDATA& rmd = pEFEM->getRobotMonitoringData();
            if (rmd.status != ROBOT_STATUS::Idle && rmd.status != ROBOT_STATUS::Run) {
               unlock();
               continue;
            }

            if (m_pActiveRobotTask != nullptr) {
               if (m_pActiveRobotTask->isPicked()) {
                  m_pActiveRobotTask->place();
               }
               unlock();
               // 检测到当前有正在下午的任务，确保当前任务完成或中止后继续
               // LOGI("检测到当前有正在下午的任务，确保当前任务完成或中止后继续...");
               continue;
            }

            // Measurement -> LoadPort
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_Measurement)
                  && !rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Unloading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  for (int slot = 0; slot < SLOT_MAX; slot++) {
                     m_pActiveRobotTask = createTransferTask_continuous_transfer(pMeasurement,
                        0, pLoadPorts[s], slot);
                     if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_Measurement_LoadPort;
                        m_nContinuousTransferStep = CTStep_end;
                        goto CT_PORT_PUT;
                     }
                  }
               }
            }

         CT_PORT_PUT:
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            // BakeCooling ->Measurement
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling3)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  3, pMeasurement, 0);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_BakeCooling_Measurement;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling -> Measurement)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

				
            // BakeCooling内部
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling2)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  2, pBakeCooling, 3);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling3;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-2 -> BakeCooling-3)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_BakeCooling_BakeCooling1)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  1, pBakeCooling, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling2;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-1 -> BakeCooling-2)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_VacuumBake_BakeCooling)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  0, pBakeCooling, 1);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_BakeCooling_BakeCooling1;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-0 -> BakeCooling-1)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // VacuumBake(G1) -> BakeCooling
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_VacuumBake_VacuumBake)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pVacuumBake,
                  1, pBakeCooling, 0);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_VacuumBake_BakeCooling;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(VacuumBake(G1) -> BakeCooling)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // VacuumBake(G1) -> VacuumBake(G1)
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Bonder2_VacuumBake)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pVacuumBake,
                  0, pVacuumBake, 1);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_VacuumBake_VacuumBake;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(VacuumBake(G1-0) -> VacuumBake(G1-1))...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // Bonder2 -> VacuumBake(G1)
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Bonder1_Bonder2)
               && !rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBonder2,
                  1, pVacuumBake, 0);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_Bonder2_VacuumBake;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Bonder2 -> VacuumBake(G1))...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
				
            // Bonder1 -> Bonder2
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Fliper_Bonder1)
               && !rmd.armState[0] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBonder1,
                  1, pBonder2, 1);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_Bonder1_Bonder2;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Bonder1 -> Bonder2)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // Fliper(G2) -> Bonder1
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Aligner_Fliper)
               &&!rmd.armState[0] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pFliper,
                  0, pBonder1, 1);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_Fliper_Bonder1;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Fliper(G2) -> Bonder1)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // Aligner -> Fliper(G2)
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_LoadPort_Aligner)
               && !rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pAligner,
                  0, pFliper, 0);
               if (m_pActiveRobotTask != nullptr) {
                  m_nContinuousTransferStep = CTStep_Aligner_Fliper;
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Aligner -> Fliper(G2))...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // LoadPort -> Aligner
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_end)
                  && !rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Loading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  for (int slot = 0; slot < SLOT_MAX; slot++) {
                     m_pActiveRobotTask = createTransferTask_continuous_transfer(pLoadPorts[s], 
                        slot, pAligner, 0);
                     if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_LoadPort_Aligner;
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(LoadPort -> Aligner)...");
                        pEFEM->setContext(m_pActiveRobotTask->getContext());
                        goto CT_PORT_GET;
                     }
                  }
               }
            }

         CT_PORT_GET:
            if (m_pActiveRobotTask != nullptr) {
               m_nContinuousTransferStep = CTStep_begin;
               LOGI("<ContinuousTransfer>千传测试，开始第 %d 轮", m_nContinuousTransferCount + 1);
            }
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            unlock();
            continue;
         }


         unlock();
      }

@@ -497,6 +1175,16 @@

   unsigned CMaster::ReadBitsProc()
   {
      // 标志位清0复位		
      {
         StationIdentifier station;
         station.nNetNo = 0;
         station.nStNo = 255;
         char szBuffer[528] = { 0 };   // 0x0, 0x1087
         m_cclink.WriteData(station, (long)DeviceType::B, 0, 528, (short*)szBuffer);
      }


      while (1) {
         // 待退出信号或时间到
         int nRet = ::WaitForSingleObject(m_hEventReadBitsThreadExit[0], 1000);
@@ -504,12 +1192,11 @@
            break;
         }

         // 读标志位
         for (auto item : m_listEquipment) {
            if (item->getID() == EQ_ID_Bonder1 ||
               item->getID() == EQ_ID_Bonder2) {
               const StationIdentifier& station = item->getStation();
               MemoryBlock& block = item->getReadBitBlock();

            const StationIdentifier& station = item->getStation();
            MemoryBlock& block = item->getReadBitBlock();
            if (block.end > block.start) {
               int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
                  block.start, block.size, block.buffer);
               if (0 == nRet) {
@@ -555,23 +1242,37 @@
            m_listener.onEqVcrEventReport(this, p, p2);
         }
      };
      listener.onPreFethedOutJob = [&](void* pEquipment, CJobDataB* pJobDataB) -> BOOL {
      listener.onPreFethedOutJob = [&](void* pEquipment, int port, CJobDataB* pJobDataB) -> BOOL {
         CEquipment* p = (CEquipment*)pEquipment;

         // 可能要加这一句
         Sleep(750);

         // 取片，更新当前搬送任务
         BOOL bOk = FALSE;
         lock();
         if (m_pActiveRobotTask != nullptr) {
            LOGI("<CMaster>onPreFethedOutJob 0001.");
            if (m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               LOGI("<CMaster>onPreFethedOutJob 0002.");
               CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getSrcSlot());
               if (pGlass != nullptr) {
                  CJobDataB* pJobDataBSrc = pGlass->getJobDataB();
                  if (pJobDataBSrc != nullptr
                     && pJobDataBSrc->getCassetteSequenceNo() == pJobDataB->getCassetteSequenceNo()
                     && pJobDataBSrc->getJobSequenceNo() == pJobDataB->getJobSequenceNo()) {
                  LOGI("<CMaster>onPreFethedOutJob 0003.");
                  CJobDataS* pJobDataS = pGlass->getJobDataS();
                  if (pJobDataS != nullptr
                     && pJobDataS->getCassetteSequenceNo() == pJobDataB->getCassetteSequenceNo()
                     && pJobDataS->getJobSequenceNo() == pJobDataB->getJobSequenceNo()) {
                     bOk = TRUE;
                     LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
                  }
                  LOGI("<CMaster>onPreFethedOutJob 0004.");
                  if (pJobDataS != nullptr) {
                     LOGI("<CMaster>onPreFethedOutJob 0005. %d,%d,%d,%d", 
                        pJobDataS->getCassetteSequenceNo(),
                        pJobDataB->getCassetteSequenceNo(),
                        pJobDataS->getJobSequenceNo(),
                        pJobDataB->getJobSequenceNo()
                        );
                  }
               }
            }
@@ -588,15 +1289,28 @@
         return bOk;

      };
      listener.onPreStoredJob = [&](void* pEquipment, CJobDataB* pJobDataB, short& slot) -> BOOL {
      listener.onPreStoredJob = [&](void* pEquipment, int port, CJobDataB* pJobDataB, short& slot) -> BOOL {
         CEquipment* p = (CEquipment*)pEquipment;

         // 可能要加这一句
         Sleep(750);

         // 放片，更新当前搬送任务
         BOOL bOk = FALSE;
         lock();
         if (m_pActiveRobotTask != nullptr) {
            if (m_pActiveRobotTask->getTarPosition() == p->getID()) {
            // 是否已经进入手臂(即取片完成),进入下一步，放片
            if (m_pActiveRobotTask->isPicking() && 
               ((m_pActiveRobotTask->getArmNo() == 1 && p->getID() == EQ_ID_ARM_TRAY1)
               || (m_pActiveRobotTask->getArmNo() == 2 && p->getID() == EQ_ID_ARM_TRAY2))
               ) {
               slot = 1;
               bOk = TRUE;
            }

            // 是否放片完成
            else if (m_pActiveRobotTask->isPlacing() &&
               m_pActiveRobotTask->getTarPosition() == p->getID()) {
               CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getTarSlot());
               if (pGlass == nullptr) {
                  bOk = TRUE;
@@ -604,15 +1318,22 @@
                  LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
               }
            }
            else if (p->getID() == EQ_ID_ARM_TRAY1 || p->getID() == EQ_ID_ARM_TRAY2) {
               slot = 1;
               bOk = TRUE;

            // 是否回撤
            else if (m_pActiveRobotTask->isRestoring() &&
               m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getSrcSlot());
               if (pGlass == nullptr && m_pActiveRobotTask->getSrcSlot() == port) {
                  bOk = TRUE;
                  slot = m_pActiveRobotTask->getSrcSlot();
                  LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
               }
            }
         }
         unlock();

         if (!bOk) {
            LOGE("<CMaster>onPreFethedOutJob, 数据校验失败.");
            LOGE("<CMaster>onPreStoredJob, 数据校验失败.");
         }

         return bOk;
@@ -629,35 +1350,135 @@
         if (code == EDCC_FETCHOUT_JOB) {
            lock();
            if (m_pActiveRobotTask != nullptr && m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               m_pActiveRobotTask->fetchOut();
               LOGI("开始取片...");
            }
            unlock();
         }
         else if (code == EDCC_STORED_JOB) {
            lock();
            if (m_pActiveRobotTask != nullptr && m_pActiveRobotTask->getTarPosition() == p->getID()) {
            if (m_pActiveRobotTask != nullptr
               && m_pActiveRobotTask->isPicking()
               && ((m_pActiveRobotTask->getArmNo() == 1 && p->getID() == EQ_ID_ARM_TRAY1)
                  || (m_pActiveRobotTask->getArmNo() == 2 && p->getID() == EQ_ID_ARM_TRAY2))
               ) {
               LOGI("取片完成.");
               m_pActiveRobotTask->fetchOut();
               m_pActiveRobotTask->picked();
            }

            else if (m_pActiveRobotTask != nullptr
               && m_pActiveRobotTask->isPlacing() 
               && m_pActiveRobotTask->getTarPosition() == p->getID()) {
               m_pActiveRobotTask->stored();
               m_pActiveRobotTask->completed();
               LOGI("放片完成...");

               if (m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER) {
                  if (m_nContinuousTransferStep == CTStep_end) {
                     m_nContinuousTransferCount++;
                     LOGI("<ContinuousTransfer>千传测试，第 %d 轮结束", m_nContinuousTransferCount);
                     if (m_listener.onCTRoundEnd != nullptr) {
                        m_listener.onCTRoundEnd(this, m_nContinuousTransferCount);
                     }
                  }
               }

               LOGI("放片完成...");
               // 完成此条搬送任务，但要把数据和消息上抛应用层

               // 如果是搬送回从AOI搬送回Port, 则glass工艺完成
               if (m_pActiveRobotTask->getSrcPosition() == EQ_ID_MEASUREMENT) {
                  CGlass* pGlass = (CGlass*)m_pActiveRobotTask->getContext();
                  pGlass->complete();
                  bool bMoved = glassFromInPorcessToComplete(pGlass);
                  if (bMoved) {
                     LOGI("<Master>Glass(%s)从工艺列队到完成列队转移成功.",
                        pGlass->getID().c_str());
                  }
                  else {
                     LOGE("<Master>Glass(%s)从工艺列队到完成列队转移失败.",
                        pGlass->getID().c_str());
                  }
                  if (m_listener.onPanelEnd != nullptr) {
                     m_listener.onPanelEnd(this, pGlass);
                  }

                  // 检查PJ是否已经完成
                  CProcessJob* pJob = getGlassProcessJob((CGlass*)m_pActiveRobotTask->getContext());
                  if (pJob != nullptr && checkAndUpdatePjComplete(pJob)) {
                     LOGE("<Master>ProcessJob(%s)完成.",
                        pJob->id().c_str());
                     if (m_listener.onPjEnd != nullptr) {
                        m_listener.onPjEnd(this, pJob);
                     }
                  }
               }



               unlock();



               lock();

               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, 1);
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_FINISH);
               }
               delete m_pActiveRobotTask;
               m_pActiveRobotTask = nullptr;
            }

            else if (m_pActiveRobotTask != nullptr
               && m_pActiveRobotTask->isRestoring()
               && m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               m_pActiveRobotTask->stored();
               m_pActiveRobotTask->restored();
               LOGI("回撤完成...");
               // 完成此条搬送任务，但要把数据和消息上抛应用层
               unlock();


               lock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_RESTORE);
               }
               delete m_pActiveRobotTask;
               m_pActiveRobotTask = nullptr;
               stop();
            }
            unlock();
         }
      };
      listener.onProcessStateChanged = [&](void* pEquipment, PROCESS_STATE state) -> void {
         LOGI("<Master>onProcessStateChanged<%d>", (int)state);
      };
      listener.onMapMismatch = [&](void* pEquipment, short scanMap, short downMap) {
         LOGE("<Master-%s>Port InUse, map(%d!=%d)不一致，请检查。",
            ((CEquipment*)pEquipment)->getName().c_str(), scanMap, downMap);
      };
      listener.onPortStatusChanged = [&](void* pEquipment, short status, __int64 data) {
         LOGE("<Master-%s>onPortStatusChanged。status=%d, data=%lld", ((CEquipment*)pEquipment)->getName().c_str(), status);
         if (status == PORT_INUSE && m_pControlJob != nullptr) {
            CLoadPort* pPort = (CLoadPort*)pEquipment;
            auto pjs = m_pControlJob->getPjs();
            for (auto pj : pjs) {
               auto carrier = pj->getCarrier(pPort->getCassetteId());
               if (carrier != nullptr) {
                  for (auto slot : carrier->slots) {
                     CGlass* pGlass = pPort->getGlassFromSlot(slot);
                     carrier->contexts.push_back((void*)pGlass);
                     if (pGlass != nullptr) {
                        pGlass->setProcessJob(pj);
                     }
                  }
               }
            }


         }
			
         if (m_listener.onLoadPortStatusChanged != nullptr) {
            m_listener.onLoadPortStatusChanged(this, (CEquipment*)pEquipment, status, data);
         }
      };
      pEquipment->setListener(listener);
      pEquipment->setCcLink(&m_cclink);
      m_listEquipment.push_back(pEquipment);
@@ -671,6 +1492,15 @@
   }

   CEquipment* CMaster::getEquipment(int id)
   {
      for (auto item : m_listEquipment) {
         if (item->getID() == id) return item;
      }

      return nullptr;
   }

   CEquipment* CMaster::getEquipment(int id) const
   {
      for (auto item : m_listEquipment) {
         if (item->getID() == id) return item;
@@ -695,6 +1525,7 @@
      pEquipment->setID(EQ_ID_LOADPORT1 + index);
      pEquipment->setName(szName);
      pEquipment->setDescription(szName);
      pEquipment->setCompareMapsBeforeProceeding(m_isCompareMapsBeforeProceeding);		
      addToEquipmentList(pEquipment);


@@ -712,7 +1543,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("Fliper(G2)");
      pEquipment->setDescription("Fliper(G2).");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x0, 0x0);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -729,7 +1560,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("VacuumBake(G1)");
      pEquipment->setDescription("VacuumBake(G1).");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x5c00, 0x66ff);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -747,7 +1578,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("Aligner");
      pEquipment->setDescription("Aligner.");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x0, 0x0);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -840,7 +1671,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("BakeCooling");
      pEquipment->setDescription("BakeCooling.");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x5100, 0x5bff);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -874,27 +1705,8 @@
      }


      // 按一定频率扫描LB数据
      static int i = 0;
      i++;
      /*
      if (i % (4 * 1) == 0) {

         for (auto item : m_listEquipment) {
            if (item->getID() == EQ_ID_Bonder1) {
               const StationIdentifier& station = item->getStation();
               MemoryBlock& block = item->getReadBitBlock();

               int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
                  block.start, block.size, block.buffer);
               if (0 == nRet) {
                  item->onReceiveLBData(block.buffer, block.size);
               }
            }
         }
      }
      */


      // 自动保存缓存
      if (i % (4 * 2) == 0) {
@@ -904,6 +1716,46 @@
         }
      }



      // 模拟测试
      static int aaa = 0;
      aaa++;
      if (aaa % 30 == 0) {
         if (!m_queueGlasses.empty()) {
            CGlass* pGlass = m_queueGlasses.front();
            pGlass->start();
            glassFromQueueToInPorcess(pGlass);

            // 这里上报Panel Start事件
            if (m_listener.onPanelStart != nullptr) {
               m_listener.onPanelStart(this, pGlass);
            }
         }
      }

      if (aaa % 45 == 0) {
         if (!m_inProcesGlasses.empty()) {
            CGlass* pGlass = m_inProcesGlasses.front();
            pGlass->complete();
            glassFromInPorcessToComplete(pGlass);

            // 这里上报Panel End事件
            if (m_listener.onPanelEnd != nullptr) {
               m_listener.onPanelEnd(this, pGlass);
            }

            CProcessJob* pJob = getGlassProcessJob(pGlass);
            if (pJob != nullptr && checkAndUpdatePjComplete(pJob)) {
               LOGE("<Master>ProcessJob(%s)完成.",
                  pJob->id().c_str());
               if (m_listener.onPjEnd != nullptr) {
                  m_listener.onPjEnd(this, pJob);
               }
            }
         }
      }
		
   }

   void CMaster::connectEquipments()
@@ -921,42 +1773,40 @@
      CBakeCooling* pBakeCooling = (CBakeCooling*)getEquipment(EQ_ID_BAKE_COOLING);
      CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);

      nRet = pLoadPort1->getPin("Out1")->connectPin(pFliper->getPin("In1"));
      nRet = pLoadPort1->getPin("Out")->connectPin(pAligner->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-Fliper失败");
      }
      nRet = pLoadPort2->getPin("Out1")->connectPin(pFliper->getPin("In2"));
      nRet = pLoadPort2->getPin("Out")->connectPin(pAligner->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-Fliper失败");
      }

      nRet = pLoadPort1->getPin("Out2")->connectPin(pVacuumBake->getPin("In1"));
      nRet = pAligner->getPin("Out1")->connectPin(pFliper->getPin("In"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-VacuumBake失败");
         LOGE("连接Aligner-Fliper失败");
      }
      nRet = pLoadPort2->getPin("Out2")->connectPin(pVacuumBake->getPin("In2"));
      nRet = pAligner->getPin("Out2")->connectPin(pVacuumBake->getPin("In"));
      if (nRet < 0) {
         LOGE("连接LoadPort1-VacuumBake失败");
         LOGE("连接Aligner-VacuumBake失败");
      }

      nRet = pFliper->getPin("Out")->connectPin(pAligner->getPin("In1"));
      nRet = pFliper->getPin("Out1")->connectPin(pBonder1->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接Fliper-Aligner失败");
         LOGE("连接Fliper-Bonder1失败");
      }
      nRet = pFliper->getPin("Out2")->connectPin(pBonder2->getPin("In1"));
      if (nRet < 0) {
         LOGE("连接Fliper-Bonder2失败");
      }

      nRet = pVacuumBake->getPin("Out")->connectPin(pAligner->getPin("In2"));
      nRet = pVacuumBake->getPin("Out1")->connectPin(pBonder1->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接VacuumBake-Aligner失败");
         LOGE("连接VacuumBake-Bonder1失败");
      }

      nRet = pAligner->getPin("Out1")->connectPin(pBonder1->getPin("In"));
      nRet = pVacuumBake->getPin("Out2")->connectPin(pBonder2->getPin("In2"));
      if (nRet < 0) {
         LOGE("连接Aligner-Bondere1失败");
      }

      nRet = pAligner->getPin("Out2")->connectPin(pBonder2->getPin("In"));
      if (nRet < 0) {
         LOGE("连接Aligner-Bondere2失败");
         LOGE("连接VacuumBake-Bonder2失败");
      }

      nRet = pBonder1->getPin("Out")->connectPin(pBakeCooling->getPin("In1"));
@@ -1069,26 +1919,645 @@

   static int taskSeqNo = 0;
   CRobotTask* CMaster::createTransferTask(CEquipment* pSrcEq, CEquipment* pTarEq,
      MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/)
      MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
      int armNo/* = 1*/, BOOL bJobMode/* = FALSE*/)
   {
      if (!pSrcEq->IsEnabled()) { 
         return nullptr;
      }

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pTarSlot = pTarEq->getAvailableSlotForGlass(primaryType);
      pSrcSlot = pSrcEq->getNonEmptySlot(primaryType);
      pSrcSlot = pSrcEq->getProcessedSlot(primaryType, bJobMode);
      if (pSrcSlot == nullptr || nullptr == pTarSlot) {
         pTarSlot = pTarEq->getAvailableSlotForGlass(secondaryType);
         pSrcSlot = pSrcEq->getNonEmptySlot(secondaryType);
         pSrcSlot = pSrcEq->getProcessedSlot(secondaryType, bJobMode);
      }


      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setRobotTransferParam(++taskSeqNo, 1, pSrcSlot->getPosition(),
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, armNo, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   CRobotTask* CMaster::createTransferTask_bonder_to_bakecooling(CEquipment* pSrcEq, CEquipment* pTarEq)
   {
      if (!pSrcEq->IsEnabled()) {
         return nullptr;
      }

      std::vector<int> slots = {1, 3};

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pTarSlot = pTarEq->getAvailableSlotForGlass2(MaterialsType::G1, slots);
      pSrcSlot = pSrcEq->getProcessedSlot(MaterialsType::G1);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   CRobotTask* CMaster::createTransferTask_bake_to_cooling(CEquipment* pSrcEq)
   {
      if (!pSrcEq->IsEnabled()) {
         return nullptr;
      }

      std::vector<int> slotsTar = { 2, 4 };
      std::vector<int> slotsSrc = { 1, 3 };

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pTarSlot = pSrcEq->getAvailableSlotForGlass2(MaterialsType::G1, slotsTar);
      pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slotsSrc);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   CRobotTask* CMaster::createTransferTask_bakecooling_to_measurement(CEquipment* pSrcEq, CEquipment* pTarEq)
   {
      if (!pSrcEq->IsEnabled()) {
         return nullptr;
      }

      std::vector<int> slots = { 2, 4 };

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G1);
      pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   CRobotTask* CMaster::createTransferTask_restore(CEquipment* pEqSrc, CLoadPort** pPorts)
   {
      if (!pEqSrc->IsEnabled()) {
         return nullptr;
      }

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot = nullptr, * pTempSlot;
      pSrcSlot = pEqSrc->getInspFailSlot();
      if (pSrcSlot != nullptr) {
         CGlass* pGlass = (CGlass*)pSrcSlot->getContext();
         ASSERT(pGlass);
         int port, slot;
         pGlass->getOrginPort(port, slot);
         pGlass->setInspResult(pPorts[port]->getID(), 0, InspResult::Fail);
         ASSERT(0 <= port && port < 4);
         ASSERT(0 <= slot && slot < 8);
         pTempSlot = pPorts[port]->getSlot(slot);
         if (pTempSlot->getContext() == nullptr) {
            pTarSlot = pTempSlot;
         }
      }


      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   CRobotTask* CMaster::createTransferTask_continuous_transfer(CEquipment* pSrcEq, int nSrcSlot,
      CEquipment* pTarEq, int nTarSlot, int armNo/* = 1*/)
   {
      if (!pSrcEq->IsEnabled()) {
         return nullptr;
      }
      if (!pTarEq->IsEnabled()) {
         return nullptr;
      }

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot = pSrcEq->getProcessedSlotCt(nSrcSlot);
      if (pSrcSlot != nullptr && pSrcEq->getID() == EQ_ID_MEASUREMENT
         && (pTarEq->getID() == EQ_ID_LOADPORT1 || pTarEq->getID() == EQ_ID_LOADPORT2 || pTarEq->getID() == EQ_ID_LOADPORT3 || pTarEq->getID() == EQ_ID_LOADPORT4)) {
         pTarEq->removeGlass(1);
      }
      CSlot* pTarSlot = pTarEq->isSlotAvailable(nTarSlot);
      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, armNo, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   int CMaster::abortCurrentTask()
   {
      lock();
      if (m_pActiveRobotTask != nullptr) {
         m_pActiveRobotTask->abort();
      }
      unlock();

      if (m_listener.onRobotTaskEvent != nullptr) {
         m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_ABORT);
      }

      lock();
      if (m_pActiveRobotTask != nullptr) {
         delete m_pActiveRobotTask;
         m_pActiveRobotTask = nullptr;
      }
      unlock();

      // 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
      // 25年7月23日后修改为不停止任务
      // stop();

      return 0;
   }

   int CMaster::restoreCurrentTask()
   {
      lock();
      if (m_pActiveRobotTask != nullptr) {
         m_pActiveRobotTask->restore();
      }
      unlock();


      return 0;
   }

   int CMaster::resendCurrentTask()
   {
      lock();
      if (m_pActiveRobotTask != nullptr) {
         m_pActiveRobotTask->resend();
      }
      unlock();


      return 0;
   }

   void CMaster::setPortType(unsigned int index, BOOL enable, int type, int mode,
      int cassetteType, int transferMode, BOOL autoChangeEnable)
   {
      ASSERT(index < 4);
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4};
      CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
      pPort->localEanblePort(enable);
      pPort->localSetPortType((SERVO::PortType)type);
      pPort->localSetPortMode((SERVO::PortMode)mode);
      pPort->localSetCessetteType((SERVO::CassetteType)cassetteType);
      pPort->localSetTransferMode((SERVO::TransferMode)transferMode);
      pPort->localAutoChangeEnable(autoChangeEnable);
   }

   void CMaster::setPortCassetteType(unsigned int index, SERVO::CassetteType type)
   {
      ASSERT(index < 4);
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
      CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
      pPort->localSetCessetteType(type);
   }

   void CMaster::setPortEnable(unsigned int index, BOOL bEnable)
   {
      ASSERT(index < 4);
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
      CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
      pPort->localEanblePort(bEnable);
   }

   void CMaster::setCompareMapsBeforeProceeding(BOOL bCompare)
   {
      m_isCompareMapsBeforeProceeding = bCompare;
   }

   void CMaster::setJobMode(BOOL bJobMode)
   {
      m_bJobMode = bJobMode;
   }

   void CMaster::datetimeSync(SYSTEMTIME& time)
   {
      for (auto item : m_listEquipment) {
         item->setDateTime(time.wYear, time.wMonth, time.wDay,
            time.wHour, time.wMinute, time.wSecond);
      }
   }

   void CMaster::enableEventReport(bool bEnable)
   {
      m_bEnableEventReport = bEnable;
   }

   void CMaster::enableAlarmReport(bool bEnable)
   {
      m_bEnableAlarmReport = bEnable;
   }

   bool CMaster::isAlarmReportEnable()
   {
      return m_bEnableAlarmReport;
   }

   int CMaster::proceedWithCarrier(unsigned int port)
   {
      if (port >= 4) return -1;

      static int pid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4};
      CLoadPort* pPort = (CLoadPort*)getEquipment(pid[port]);
      pPort->sendCassetteCtrlCmd(CCC_PROCESS_START, nullptr, 0, 0, 0, nullptr, nullptr);
      return 0;
   }

   int CMaster::carrierRelease(unsigned int port)
   {
      if (port >= 4) return -1;

      static int pid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
      CLoadPort* pPort = (CLoadPort*)getEquipment(pid[port]);
      pPort->sendCassetteCtrlCmd(CCC_PROCESS_CANCEL, nullptr, 0, 0, 0, nullptr, nullptr);
      return 0;
   }

   int CMaster::getContinuousTransferCount()
   {
      return m_nContinuousTransferCount;
   }

   void CMaster::setContinuousTransferCount(int round)
   {
      m_nContinuousTransferCount = round;
   }

   int CMaster::setProcessJobs(std::vector<CProcessJob*>& pjs)
   {
      std::vector<SERVO::CProcessJob*> temp;
      for (auto p : pjs) {
         if (p->validate(*this)) {
            p->queue();
            temp.push_back(p);
         }
      }

      m_processJobs = temp;
      this->saveState();

      return (int)m_processJobs.size();
   }

   std::vector<CProcessJob*>& CMaster::getProcessJobs()
   {
      return m_processJobs;
   }

   CProcessJob* CMaster::getProcessJob(const std::string& id)
   {
      for (auto item : m_processJobs) {
         if (item->id().compare(id) == 0) return item;
      }

      return nullptr;
   }

   int CMaster::setControlJob(CControlJob& controlJob)
   {
      // 回调：是否参创建ControlJob
      auto canCreateCjFn = [&](uint32_t& cc, std::string& mm) -> bool {
         if (m_pControlJob != nullptr) {
            cc = 1100;
            mm = "当前ControlJob未结批，不能创建新的ControlJob";
            return false;
         }
         return true;
      };


      // 回调：是否存在
      auto pjExists = [&](const std::string& id) -> bool {
         return getProcessJob(id) != nullptr;
      };

      // 回调：是否可加入 CJ（这里定义：必须是 Queued）
      auto pjJoinable = [&](const std::string& id) -> bool {
         auto pj = getProcessJob(id);
         if (pj == nullptr) return false;
         return pj->state() == PJState::Queued;
      };

      bool bRet = controlJob.validateForCreate(canCreateCjFn, pjExists, pjJoinable);
      if (!bRet) return -1;

      std::vector<CProcessJob*> temps;
      m_pControlJob = new CControlJob(controlJob);
      auto pjIds = controlJob.pjIds();
      for (auto id : pjIds) {
         auto pj = getProcessJob(id);
         if (pj != nullptr) {
            temps.push_back(pj);
         }
      }
      m_pControlJob->setPJs(temps);
      this->saveState();


      return 0;
   }

   CControlJob* CMaster::getControlJob()
   {
      return m_pControlJob;
   }

   CLoadPort* CMaster::getPortWithCarrierId(const std::string& carrierId) const
   {
      CLoadPort* pPort;
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4};
      for (int i = 0; i < 4; i++) {
         pPort = (CLoadPort*)getEquipment(eqid[i]);
         ASSERT(pPort);
         if (pPort->getCassetteId().compare(carrierId) == 0) return pPort;
      }

      return nullptr;
   }

   bool CMaster::isProcessJobsEmpty() const
   {
      return m_processJobs.empty();
   }

   bool CMaster::recipeExists(const std::string& ppid) const
   {
      std::vector<std::string> vecRecipe = RecipeManager::getInstance().getAllPPID();
      bool exists = std::find(vecRecipe.begin(), vecRecipe.end(), ppid) != vecRecipe.end();
      return exists;
   }

   bool CMaster::carrierPresent(const std::string& carrierId) const
   {
      CLoadPort* pPort = getPortWithCarrierId(carrierId);
      return pPort != nullptr;
   }

   bool CMaster::slotUsable(const std::string& carrierId, uint16_t slot) const
   {
      CLoadPort* pPort = getPortWithCarrierId(carrierId);
      if(pPort == nullptr) return false;
      CSlot* pSlot = pPort->getSlot(slot);
      if (pSlot == nullptr) return false;
      return pSlot->isEnable();
   }

   bool CMaster::ceidDefined(uint32_t ceid) const
   {
      return true;
   }

   bool CMaster::saveState() const
   {
      std::ofstream ofs(m_strStatePath, std::ios::binary);
      if (!ofs) return false;

      // 文件头
      uint32_t magic = 0x4D415354; // 'MAST'
      uint16_t version = 1;
      ofs.write(reinterpret_cast<const char*>(&magic), sizeof(magic));
      ofs.write(reinterpret_cast<const char*>(&version), sizeof(version));

      // 保存 ControlJob
      bool hasCJ = (m_pControlJob != nullptr);
      ofs.write(reinterpret_cast<const char*>(&hasCJ), sizeof(hasCJ));
      if (hasCJ) {
         m_pControlJob->serialize(ofs);
      }

      // 保存 ProcessJob 列表
      uint32_t count = static_cast<uint32_t>(m_processJobs.size());
      ofs.write(reinterpret_cast<const char*>(&count), sizeof(count));
      for (const auto& job : m_processJobs) {
         job->serialize(ofs);
      }

      // 以后可以在这里追加新字段
      return true;
   }

   bool CMaster::loadState(const std::string& path)
   {
      // 保存文件路径
      m_strStatePath = path;


      std::ifstream ifs(path, std::ios::binary);
      if (!ifs) return false;

      // 文件头
      uint32_t magic = 0;
      uint16_t version = 0;
      ifs.read(reinterpret_cast<char*>(&magic), sizeof(magic));
      ifs.read(reinterpret_cast<char*>(&version), sizeof(version));

      if (magic != 0x4D415354) {
         // 文件不合法
         return false;
      }

      if (m_pControlJob != nullptr) {
         delete m_pControlJob;
         m_pControlJob = nullptr;
      }

      // 读取 ControlJob
      bool hasCJ = false;
      ifs.read(reinterpret_cast<char*>(&hasCJ), sizeof(hasCJ));
      if (hasCJ) {
         m_pControlJob = new CControlJob();
         if (!CControlJob::deserialize(ifs, *m_pControlJob)) return false;
      }


      // 读取 ProcessJob 列表
      uint32_t count = 0;
      ifs.read(reinterpret_cast<char*>(&count), sizeof(count));
      m_processJobs.clear();
      for (uint32_t i = 0; i < count; i++) {
         CProcessJob* pProcessJob = new CProcessJob();
         if (!CProcessJob::deserialize(ifs, *pProcessJob)) return false;
         m_processJobs.push_back(pProcessJob);
      }


      // 找到CProcessJob指针加入列表中
      std::vector<CProcessJob*> tempPjs;
      auto ids = m_pControlJob->pjIds();
      for (auto id : ids) {
         auto pj = getProcessJob(id);
         if (pj != nullptr) {
            tempPjs.push_back(pj);
         }
      }
      m_pControlJob->setPJs(tempPjs);


      // 如果版本升级，可在这里判断 version 来加载新字段


      return true;
   }

   CProcessJob* CMaster::acquireNextProcessJob()
   {
      auto& pjs = m_pControlJob->getPjs();
      for (const auto pj : pjs) {
         if (pj->state() == PJState::Queued) {
            pj->start();
         }
         return pj;
      }


      return nullptr;
   }

   CGlass* CMaster::acquireNextGlass()
   {
      for (auto* pj : m_inProcesJobs) {
         // 遍历 PJ 的 carriers 和 slots
         for (auto& cs : pj->carriers()) {
            for (auto ctx : cs.contexts) {
               CGlass* pGlass = (CGlass*)ctx;
               if (pGlass->state() == GlsState::NoState) {
                  pGlass->queue();
                  return pGlass;
               }
            }
         }
      }
      return nullptr; // 没有可加工的 Glass
   }

   int CMaster::acquireGlassToQueue()
   {
      int nCount = 0;
      for (auto* pj : m_inProcesJobs) {
         // 遍历 PJ 的 carriers 和 slots
         for (auto& cs : pj->carriers()) {
            for (auto ctx : cs.contexts) {
               CGlass* pGlass = (CGlass*)ctx;
               if (pGlass->state() == GlsState::NoState) {
                  pGlass->queue();
                  if(addGlassToQueue(pGlass)) nCount++;
               }
            }
         }
      }
      return nCount;
   }

   bool CMaster::addGlassToQueue(CGlass* pGlass)
   {
      for (auto g : m_queueGlasses) {
         if (g == pGlass) return false;
      }

      m_queueGlasses.push_back(pGlass);
      return true;
   }

   bool CMaster::glassFromQueueToInPorcess(CGlass* pGlass)
   {
      auto it = std::find(m_queueGlasses.begin(), m_queueGlasses.end(), pGlass); 
      if (it != m_queueGlasses.end()) {
         m_inProcesGlasses.push_back(*it);
         m_queueGlasses.erase(it);
         return true;
      }
      return false;
   }

   bool CMaster::glassFromInPorcessToComplete(CGlass* pGlass)
   {
      auto it = std::find(m_inProcesGlasses.begin(), m_inProcesGlasses.end(), pGlass);
      if (it != m_inProcesGlasses.end()) {
         m_completeGlasses.push_back(*it);
         m_inProcesGlasses.erase(it);
         return true;
      }
      return false;
   }

   bool CMaster::checkAndUpdatePjComplete(CProcessJob* pJob)
   {
      ASSERT(pJob);
      auto state = pJob->state();
      if (state != PJState::InProcess && state != PJState::Paused) return false;

      for (auto c : pJob->carriers()) {
         for (auto g : c.contexts) {
            CGlass* pGlass = (CGlass*)g;
            if (pGlass->state() != GlsState::Aborted
               && pGlass->state() != GlsState::Completed
               && pGlass->state() != GlsState::Failed) return false;
         }
      }

      return pJob->complete();
   }

   CProcessJob* CMaster::getGlassProcessJob(CGlass* pGlass)
   {
      if (m_pControlJob == nullptr) return nullptr;
      for (auto pj : m_pControlJob->getPjs()) {
         for (auto c : pj->carriers()) {
            for (auto g : c.contexts) {
               if (g == pGlass) return pj;
            }
         }
      }

      return nullptr;
   }
}