1. 添加JOB Data交互

mrDarker

2025-06-19 576e5fc2d2db7d106dc264c685d5a59849082d1f

 SourceCode/Bond/Servo/CMaster.cpp

@@ -1,6 +1,8 @@
#include "stdafx.h"
#include "Common.h"
#include "CMaster.h"
#include <future>
#include <vector>


namespace SERVO {
@@ -48,6 +50,7 @@
      m_ullRunTime = 0;
      m_state = MASTERSTATE::READY;
      m_pActiveRobotTask = nullptr;
      m_nLastError = 0;
      InitializeCriticalSection(&m_criticalSection);
   }

@@ -160,9 +163,9 @@
      ASSERT(pMeasurement);

      pEfem->setPort(0, pPort1);
      pEfem->setPort(1, pPort1);
      pEfem->setPort(2, pPort1);
      pEfem->setPort(3, pPort1);
      pEfem->setPort(1, pPort2);
      pEfem->setPort(2, pPort3);
      pEfem->setPort(3, pPort4);
      pEfem->setFliper(pFliper);
      pEfem->setAligner(pAligner);
      pEfem->setArmTray(0, pArmTray1);
@@ -264,6 +267,13 @@
      return 0;
   }

   void CMaster::clearError()
   {
      m_nLastError = 0;
      m_strLastError = "";
      setState(MASTERSTATE::READY);
   }

   ULONGLONG CMaster::getRunTime()
   {
      if (m_state == MASTERSTATE::RUNNING)
@@ -325,8 +335,114 @@
         // 如果状态为STARTING，开始工作并切换到RUNNING状态
         lock();
         if (m_state == MASTERSTATE::STARTING) {
            // 发送indexerOperationModeChange到各个机台，成功后切换到RUNNING状态
            // 否则切换到MSERROR状态
            int nRet;
            CEquipment* pEq[6] = { pEFEM, pBonder1, pBonder2, pBakeCooling, 
               pVacuumBake, pMeasurement};
            BOOL bIomcOk[7] = {FALSE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE};
            std::vector<std::promise<void>> promises(6);
            std::vector<std::future<void>> futures;

            nRet = pEq[0]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[0] = retCode == (int)RET::OK;
                  promises[0].set_value();
                  TRACE("a0001\n", writeCode, retCode);
               });
            if (nRet != 0) {
               LOGI("<Master>EFEM切换Start状态失败");
               m_strLastError = "EFEM切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[0].get_future());
            /*
            nRet = pEq[1]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[1] = retCode == (int)RET::OK;
                  promises[1].set_value();
                  TRACE("a0002\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Bonder1切换Start状态失败");
               m_strLastError = "Bonder1切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[1].get_future());

            nRet = pEq[2]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[2] = retCode == (int)RET::OK;
                  promises[2].set_value();
                  TRACE("a0003\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Bonder2切换Start状态失败");
               m_strLastError = "Bonder2切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[2].get_future());

            nRet = pEq[3]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[3] = retCode == (int)RET::OK;
                  promises[3].set_value();
                  TRACE("a0004\n");
               });
            if (nRet != 0) {
               LOGI("<Master>BakeCooling切换Start状态失败");
               m_strLastError = "BakeCooling切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[3].get_future());

            nRet = pEq[4]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[4] = retCode == (int)RET::OK;
                  promises[4].set_value();
                  TRACE("a0005\n");
               });
            if (nRet != 0) {
               LOGI("<Master>VacuumBake切换Start状态失败");
               m_strLastError = "VacuumBake切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[4].get_future());

            nRet = pEq[5]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Start,
               [&](int writeCode, int retCode) -> void {
                  bIomcOk[5] = retCode == (int)RET::OK;
                  promises[5].set_value();
                  TRACE("a0006\n");
               });
            if (nRet != 0) {
               LOGI("<Master>Measurement切换Start状态失败");
               m_strLastError = "Measurement切换Start状态失败.";
               goto WAIT;
            }
            futures.push_back(promises[5].get_future());
            */

WAIT:
            for (auto& f : futures) {
               f.wait();  // 阻塞等待对应设备完成
            }
            for (int i = 0; i < 6; i++) {
               if (!bIomcOk[i]) {
                  bIomcOk[6] = FALSE;
                  LOGI("<Master>%s切换Start状态失败", pEq[i]->getName().c_str());
               }
            }
				
            // 检查看是否都已经切换到START状态
            if (!bIomcOk[6]) {
               unlock();
               setState(MASTERSTATE::MSERROR);
               continue;
            }


            unlock();
            Sleep(1000);
            setState(MASTERSTATE::RUNNING);
            continue;
         }
@@ -335,7 +451,49 @@
         // 处理完成当前事务后，切换到停止或就绪状态
         else if (m_state == MASTERSTATE::STOPPING) {
            unlock();
            Sleep(1000);
            LOGI("<Master>开始切换各设备到 Stop 模式...");

            std::vector<std::promise<void>> promises(6);
            std::vector<std::future<void>> futures;
            BOOL bIomcOk[7] = { FALSE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE };

            int nRet;
            CEquipment* pEq[6] = { pEFEM, pBonder1, pBonder2, pBakeCooling,
               pVacuumBake, pMeasurement };

            for (int i = 0; i < 1; ++i) {
               nRet = pEq[i]->indexerOperationModeChange(IDNEXER_OPERATION_MODE::Stop,
                  [i, &promises, &bIomcOk](int writeCode, int retCode) -> void {
                     bIomcOk[i] = retCode == (int)RET::OK;
                     promises[i].set_value();
                     TRACE("s000%d: ret=%d\n", i + 1, retCode);
                  });
               if (nRet != 0) {
                  LOGI("<Master>%s切换Stop状态发送失败", pEq[i]->getName().c_str());
                  m_strLastError = pEq[i]->getName() + "切换Stop状态发送失败.";
                  bIomcOk[i] = FALSE;
                  promises[i].set_value(); // 避免 wait 阻塞
               }
               futures.push_back(promises[i].get_future());
            }

            for (auto& f : futures) {
               f.wait();  // 等待所有完成
            }

            for (int i = 0; i < 6; ++i) {
               if (!bIomcOk[i]) {
                  bIomcOk[6] = FALSE;
                  LOGI("<Master>%s切换Stop状态失败", pEq[i]->getName().c_str());
               }
            }

            if (!bIomcOk[6]) {
               setState(MASTERSTATE::MSERROR);
               continue;
            }

            LOGI("<Master>所有设备成功切换到 Stop 模式");
            setState(MASTERSTATE::READY);
            continue;
         }
@@ -477,7 +635,7 @@

            // Fliper(G2) -> Bonder
            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[1]) {
            if (!rmd.armState[1] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
@@ -491,7 +649,7 @@
               }
            }

            if (!rmd.armState[1]) {
            if (!rmd.armState[1] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
@@ -505,7 +663,7 @@
               }
            }

            if (!rmd.armState[0]) {
            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
@@ -519,7 +677,7 @@
               }
            }

            if (!rmd.armState[0]) {
            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
@@ -613,16 +771,13 @@

         // 读标志位
         for (auto item : m_listEquipment) {
            if (item->getID() == EQ_ID_Bonder1 ||
               item->getID() == EQ_ID_Bonder2) {
               const StationIdentifier& station = item->getStation();
               MemoryBlock& block = item->getReadBitBlock();
            const StationIdentifier& station = item->getStation();
            MemoryBlock& block = item->getReadBitBlock();

               int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
                  block.start, block.size, block.buffer);
               if (0 == nRet) {
                  item->onReceiveLBData(block.buffer, block.size);
               }
            int nRet = m_cclink.ReadData2(station, (DeviceType)block.type,
               block.start, block.size, block.buffer);
            if (0 == nRet) {
               item->onReceiveLBData(block.buffer, block.size);
            }
         }
      }
@@ -674,10 +829,10 @@
            if (m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getSrcSlot());
               if (pGlass != nullptr) {
                  CJobDataB* pJobDataBSrc = pGlass->getJobDataB();
                  if (pJobDataBSrc != nullptr
                     && pJobDataBSrc->getCassetteSequenceNo() == pJobDataB->getCassetteSequenceNo()
                     && pJobDataBSrc->getJobSequenceNo() == pJobDataB->getJobSequenceNo()) {
                  CJobDataS* pJobDataS = pGlass->getJobDataS();
                  if (pJobDataS != nullptr
                     && pJobDataS->getCassetteSequenceNo() == pJobDataB->getCassetteSequenceNo()
                     && pJobDataS->getJobSequenceNo() == pJobDataB->getJobSequenceNo()) {
                     bOk = TRUE;
                     LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
                  }
@@ -780,7 +935,9 @@
            unlock();
         }
      };

      listener.onProcessStateChanged = [&](void* pEquipment, PROCESS_STATE state) -> void {
         LOGI("<Master>onProcessStateChanged<%d>", (int)state);
      };
      pEquipment->setListener(listener);
      pEquipment->setCcLink(&m_cclink);
      m_listEquipment.push_back(pEquipment);
@@ -852,7 +1009,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("VacuumBake(G1)");
      pEquipment->setDescription("VacuumBake(G1).");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x5c00, 0x66ff);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -963,7 +1120,7 @@
      pEquipment->setBaseAlarmId(BASE_ALARM_EFEM);
      pEquipment->setName("BakeCooling");
      pEquipment->setDescription("BakeCooling.");
      pEquipment->setReadBitBlock(0x4000, 0x45ff);
      pEquipment->setReadBitBlock(0x5100, 0x5bff);
      pEquipment->setStation(0, 255);
      addToEquipmentList(pEquipment);

@@ -1204,14 +1361,11 @@


      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         int srcPos, srcSlot, tarPos, tarSlot;
         transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
         transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, armNo, srcPos,
            tarPos, srcSlot, tarSlot);
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, armNo, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


@@ -1228,14 +1382,11 @@
      pSrcSlot = pSrcEq->getProcessedSlot(MaterialsType::G1);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         int srcPos, srcSlot, tarPos, tarSlot;
         transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
         transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, srcPos,
            tarPos, srcSlot, tarSlot);
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


@@ -1253,14 +1404,11 @@
      pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slotsSrc);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         int srcPos, srcSlot, tarPos, tarSlot;
         transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
         transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, srcPos,
            tarPos, srcSlot, tarSlot);
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


@@ -1277,68 +1425,15 @@
      pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         int srcPos, srcSlot, tarPos, tarSlot;
         transformPosAndSlot(pSrcSlot->getPosition(), pSrcSlot->getNo(), srcPos, srcSlot);
         transformPosAndSlot(pTarSlot->getPosition(), pTarSlot->getNo(), tarPos, tarSlot);
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, srcPos,
            tarPos, srcSlot, tarSlot);
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   void CMaster::transformPosAndSlot(int srcPos, int srcSlot, int& tarPos, int& tarSlot)
   {
      switch (srcPos)
      {
      case EQ_ID_LOADPORT1:
      case EQ_ID_LOADPORT2:
      case EQ_ID_LOADPORT3:
      case EQ_ID_LOADPORT4:
      case EQ_ID_ARM_TRAY1:
      case EQ_ID_ARM_TRAY2:
      case EQ_ID_ALIGNER:
      case EQ_ID_FLIPER:
         tarPos = srcPos;
         tarSlot = 1;
         break;
      case EQ_ID_Bonder1:
         if (1 <= srcSlot && srcSlot <= 2) {
            tarPos = 9 + srcSlot;
            tarSlot = 1;
         }
         break;
      case EQ_ID_Bonder2:
         if (1 <= srcSlot && srcSlot <= 2) {
            tarPos = 11 + srcSlot;
            tarSlot = 1;
         }
         break;
      case EQ_ID_VACUUMBAKE:
         if (1 <= srcSlot && srcSlot <= 2) {
            tarPos = 13 + srcSlot;
            tarSlot = 1;
         }
         break;
      case EQ_ID_BAKE_COOLING:
         if (1 <= srcSlot && srcSlot <= 4) {
            tarPos = 15 + srcSlot;
            tarSlot = 1;
         }
         break;
      case EQ_ID_MEASUREMENT:
         tarPos = 19;
         tarSlot = 1;
         break;
      default:
         tarPos = srcPos;
         tarSlot = srcSlot;
         break;
      }
   }

   int CMaster::abortCurrentTask()