1.增加千传计数,保存计数，重启软件时恢复； 2.千传测试模式，打印相关日志，方便后期提取，用于统计； 3.千传模式时烘烤两腔体都要进入； 4.千传模...

LAPTOP-SNT8I5JK\Boounion

2025-08-08 331f447bb0e5eccf0b3161ab287c1372b14b8480

 SourceCode/Bond/Servo/CMaster.cpp

@@ -51,6 +51,12 @@
      m_state = MASTERSTATE::READY;
      m_pActiveRobotTask = nullptr;
      m_nLastError = 0;
      m_isCompareMapsBeforeProceeding = FALSE;
      m_bEnableEventReport = true;
      m_bEnableAlarmReport = true;
      m_bContinuousTransfer = false;
      m_nContinuousTransferCount = 0;
      m_nContinuousTransferStep = CTStep_begin;
      InitializeCriticalSection(&m_criticalSection);
   }

@@ -248,6 +254,20 @@
         return -1;
      }

      m_bContinuousTransfer = false;
      setState(MASTERSTATE::STARTING);
      m_ullStartTime = GetTickCount64();

      return 0;
   }

   int CMaster::startContinuousTransfer()
   {
      if (m_state != MASTERSTATE::READY) {
         return -1;
      }

      m_bContinuousTransfer = true;
      setState(MASTERSTATE::STARTING);
      m_ullStartTime = GetTickCount64();

@@ -257,7 +277,7 @@
   int CMaster::stop()
   {
      // 运行时间为累加结果，本次停止时刷新；
      if (m_state != MASTERSTATE::RUNNING) {
      if (m_state != MASTERSTATE::RUNNING && m_state != MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER) {
         return -1;
      }

@@ -276,7 +296,7 @@

   ULONGLONG CMaster::getRunTime()
   {
      if (m_state == MASTERSTATE::RUNNING)
      if (m_state == MASTERSTATE::RUNNING || m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER)
         return m_ullRunTime + (GetTickCount64() - m_ullStartTime);
      else
         return m_ullRunTime;
@@ -327,7 +347,7 @@
      while (1) {
         // 待退出信号或时间到
         HANDLE hEvents[] = { m_hEventDispatchThreadExit[0], m_hDispatchEvent };
         int nRet = WaitForMultipleObjects(2, hEvents, FALSE, 1000);
         int nRet = WaitForMultipleObjects(2, hEvents, FALSE, 500);
         if (nRet == WAIT_OBJECT_0) {
            break;
         }
@@ -444,7 +464,11 @@


            unlock();
            setState(MASTERSTATE::RUNNING);
            if(!m_bContinuousTransfer)
               setState(MASTERSTATE::RUNNING);
            else 
               setState(MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER);

            continue;
         }

@@ -545,15 +569,11 @@
               LOGI("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"),
                  rmd.armState[1] ? _T("不可用") : _T("可用"));
            }
            CEquipment* pEqTar[] = { pVacuumBake, pFliper };
            if (primaryType == MaterialsType::G2) {
               pEqTar[0] = pFliper;
               pEqTar[1] = pVacuumBake;
            }
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && pLoadPorts[s]->getPortType() == PortType::Unloading
                  && pLoadPorts[s]->getPortMode() == PortMode::ReadyToUnload) {
                  && (pt == PortType::Unloading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], primaryType, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     goto PORT_PUT;
@@ -562,157 +582,65 @@
            }

         PORT_PUT:
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->pick();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            // Measurement NG -> LoadPort
            // NG回原位
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_restore(pMeasurement, pLoadPorts);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建Measurement回退任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }




            // BakeCooling ->Measurement
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            
            // BakeCooling内部
            // Bake -> Cooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Bonder -> BakeCooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Fliper(G2) -> Bonder
            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[1] && !pBonder1->hasBondClass()) {
            auto pSrcSlot = pVacuumBake->getProcessedSlot(primaryType);
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[1] && !pBonder2->hasBondClass()) {
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


@@ -720,55 +648,28 @@
            // Aligner -> VacuumBake(G1)
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Aligner -> LoadPort
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_restore(pAligner, pLoadPorts);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建Aligner回退任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }




            // LoadPort -> Aligner
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && pLoadPorts[s]->getPortType() == PortType::Loading
                  && pLoadPorts[s]->getPortMode() == PortMode::ReadyToLoad) {
                  && (pt == PortType::Loading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pLoadPorts[s], pAligner, primaryType, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     pEFEM->setContext(m_pActiveRobotTask->getContext());
@@ -778,20 +679,181 @@
            }

PORT_GET:
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->pick();
               std::string strDescription = m_pActiveRobotTask->getDescription();
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            unlock();
            continue;
         }

         // 千传模式调度逻辑
         else if (m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER) {
            // 检测判断robot状态
            RMDATA& rmd = pEFEM->getRobotMonitoringData();
            if (rmd.status != ROBOT_STATUS::Idle && rmd.status != ROBOT_STATUS::Run) {
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }

            unlock();
            if (m_pActiveRobotTask != nullptr) {
               if (m_pActiveRobotTask->isPicked()) {
                  m_pActiveRobotTask->place();
               }
               unlock();
               // 检测到当前有正在下午的任务，确保当前任务完成或中止后继续
               // LOGI("检测到当前有正在下午的任务，确保当前任务完成或中止后继续...");
               continue;
            }

            // Measurement -> LoadPort
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Unloading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  for (int slot = 0; slot < SLOT_MAX; slot++) {
                     m_pActiveRobotTask = createTransferTask_continuous_transfer(pMeasurement,
                        0, pLoadPorts[s], slot);
                     if (m_pActiveRobotTask != nullptr) {
                        m_nContinuousTransferStep = CTStep_end;
                        goto CT_PORT_PUT;
                     }
                  }
               }
            }

         CT_PORT_PUT:
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            // BakeCooling ->Measurement
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  3, pMeasurement, 0);
               if (m_pActiveRobotTask != nullptr) {
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling -> Measurement)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

				
            // BakeCooling内部
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  2, pBakeCooling, 3);
               if (m_pActiveRobotTask != nullptr) {
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-2 -> BakeCooling-3)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  1, pBakeCooling, 2);
               if (m_pActiveRobotTask != nullptr) {
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-1 -> BakeCooling-2)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBakeCooling,
                  0, pBakeCooling, 1);
               if (m_pActiveRobotTask != nullptr) {
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(BakeCooling-0 -> BakeCooling-1)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // VacuumBake(G1) -> BakeCooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pVacuumBake,
                  1, pBakeCooling, 0);
               if (m_pActiveRobotTask != nullptr) {
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(VacuumBake(G1) -> BakeCooling)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // VacuumBake(G1) -> VacuumBake(G1)
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pVacuumBake,
                  0, pVacuumBake, 1);
               if (m_pActiveRobotTask != nullptr) {
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(VacuumBake(G1-0) -> VacuumBake(G1-1))...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // Bonder2 -> VacuumBake(G1)
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBonder2,
                  1, pVacuumBake, 0);
               if (m_pActiveRobotTask != nullptr) {
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Bonder2 -> VacuumBake(G1))...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
				
            // Bonder1 -> Bonder2
            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBonder1,
                  1, pBonder2, 1);
               if (m_pActiveRobotTask != nullptr) {
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Bonder1 -> Bonder2)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // Fliper(G2) -> Bonder1
            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pFliper,
                  0, pBonder1, 1, 2);
               if (m_pActiveRobotTask != nullptr) {
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Fliper(G2) -> Bonder1)...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // Aligner -> Fliper(G2)
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pAligner,
                  0, pFliper, 0);
               if (m_pActiveRobotTask != nullptr) {
                  LOGI("<ContinuousTransfer>千传测试，开始搬送任务(Aligner -> Fliper(G2))...");
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            // LoadPort -> Aligner
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Loading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  for (int slot = 0; slot < SLOT_MAX; slot++) {
                     m_pActiveRobotTask = createTransferTask_continuous_transfer(pLoadPorts[s], 
                        slot, pAligner, 0);
                     if (m_pActiveRobotTask != nullptr) {
                        LOGI("<ContinuousTransfer>千传测试，开始搬送任务(LoadPort -> Aligner)...");
                        pEFEM->setContext(m_pActiveRobotTask->getContext());
                        goto CT_PORT_GET;
                     }
                  }
               }
            }

         CT_PORT_GET:
            if (m_pActiveRobotTask != nullptr) {
               m_nContinuousTransferStep = CTStep_begin;
               LOGI("<ContinuousTransfer>千传测试，开始第 %d 轮", m_nContinuousTransferCount + 1);
            }
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            unlock();
            continue;
         }


         unlock();
      }

@@ -805,6 +867,16 @@

   unsigned CMaster::ReadBitsProc()
   {
      // 标志位清0复位		
      {
         StationIdentifier station;
         station.nNetNo = 0;
         station.nStNo = 255;
         char szBuffer[528] = { 0 };   // 0x0, 0x1087
         m_cclink.WriteData(station, (long)DeviceType::B, 0, 528, (short*)szBuffer);
      }


      while (1) {
         // 待退出信号或时间到
         int nRet = ::WaitForSingleObject(m_hEventReadBitsThreadExit[0], 1000);
@@ -865,6 +937,8 @@
      listener.onPreFethedOutJob = [&](void* pEquipment, int port, CJobDataB* pJobDataB) -> BOOL {
         CEquipment* p = (CEquipment*)pEquipment;

         // 可能要加这一句
         Sleep(750);

         // 取片，更新当前搬送任务
         BOOL bOk = FALSE;
@@ -898,6 +972,8 @@
      listener.onPreStoredJob = [&](void* pEquipment, int port, CJobDataB* pJobDataB, short& slot) -> BOOL {
         CEquipment* p = (CEquipment*)pEquipment;

         // 可能要加这一句
         Sleep(750);

         // 放片，更新当前搬送任务
         BOOL bOk = FALSE;
@@ -975,6 +1051,17 @@
               && m_pActiveRobotTask->getTarPosition() == p->getID()) {
               m_pActiveRobotTask->stored();
               m_pActiveRobotTask->completed();

               if (m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER) {
                  if (m_nContinuousTransferStep == CTStep_end) {
                     m_nContinuousTransferCount++;
                     LOGI("<ContinuousTransfer>千传测试，第 %d 轮结束", m_nContinuousTransferCount);
                     if (m_listener.onCTRoundEnd != nullptr) {
                        m_listener.onCTRoundEnd(this, m_nContinuousTransferCount);
                     }
                  }
               }

               LOGI("放片完成...");
               // 完成此条搬送任务，但要把数据和消息上抛应用层
               unlock();
@@ -1016,6 +1103,12 @@
         LOGE("<Master-%s>Port InUse, map(%d!=%d)不一致，请检查。",
            ((CEquipment*)pEquipment)->getName().c_str(), scanMap, downMap);
      };
      listener.onPortStatusChanged = [&](void* pEquipment, short status, __int64 data) {
         LOGE("<Master-%s>onPortStatusChanged。status=%d, data=%lld", ((CEquipment*)pEquipment)->getName().c_str(), status);
         if (m_listener.onLoadPortStatusChanged != nullptr) {
            m_listener.onLoadPortStatusChanged(this, (CEquipment*)pEquipment, status, data);
         }
      };
      pEquipment->setListener(listener);
      pEquipment->setCcLink(&m_cclink);
      m_listEquipment.push_back(pEquipment);
@@ -1053,6 +1146,7 @@
      pEquipment->setID(EQ_ID_LOADPORT1 + index);
      pEquipment->setName(szName);
      pEquipment->setDescription(szName);
      pEquipment->setCompareMapsBeforeProceeding(m_isCompareMapsBeforeProceeding);		
      addToEquipmentList(pEquipment);


@@ -1547,6 +1641,35 @@
      return pTask;
   }

   CRobotTask* CMaster::createTransferTask_continuous_transfer(CEquipment* pSrcEq, int nSrcSlot,
      CEquipment* pTarEq, int nTarSlot, int armNo/* = 1*/)
   {
      if (!pSrcEq->IsEnabled()) {
         return nullptr;
      }
      if (!pTarEq->IsEnabled()) {
         return nullptr;
      }

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot = pSrcEq->getProcessedSlotCt(nSrcSlot);
      if (pSrcSlot != nullptr && pSrcEq->getID() == EQ_ID_MEASUREMENT
         && (pTarEq->getID() == EQ_ID_LOADPORT1 || pTarEq->getID() == EQ_ID_LOADPORT2 || pTarEq->getID() == EQ_ID_LOADPORT3 || pTarEq->getID() == EQ_ID_LOADPORT4)) {
         pTarEq->removeGlass(1);
      }
      CSlot* pTarSlot = pTarEq->isSlotAvailable(nTarSlot);
      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, armNo, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   int CMaster::abortCurrentTask()
   {
      lock();
@@ -1567,7 +1690,8 @@
      unlock();

      // 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
      stop();
      // 25年7月23日后修改为不停止任务
      // stop();

      return 0;
   }
@@ -1609,4 +1733,78 @@
      pPort->localSetTransferMode((SERVO::TransferMode)transferMode);
      pPort->localAutoChangeEnable(autoChangeEnable);
   }

   void CMaster::setPortCassetteType(unsigned int index, SERVO::CassetteType type)
   {
      ASSERT(index < 4);
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
      CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
      pPort->localSetCessetteType(type);
   }

   void CMaster::setPortEnable(unsigned int index, BOOL bEnable)
   {
      ASSERT(index < 4);
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
      CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
      pPort->localEanblePort(bEnable);
   }

   void CMaster::setCompareMapsBeforeProceeding(BOOL bCompare)
   {
      m_isCompareMapsBeforeProceeding = bCompare;
   }

   void CMaster::datetimeSync(SYSTEMTIME& time)
   {
      for (auto item : m_listEquipment) {
         item->setDateTime(time.wYear, time.wMonth, time.wDay,
            time.wHour, time.wMinute, time.wSecond);
      }
   }

   void CMaster::enableEventReport(bool bEnable)
   {
      m_bEnableEventReport = bEnable;
   }

   void CMaster::enableAlarmReport(bool bEnable)
   {
      m_bEnableAlarmReport = bEnable;
   }

   bool CMaster::isAlarmReportEnable()
   {
      return m_bEnableAlarmReport;
   }

   int CMaster::proceedWithCarrier(unsigned int port)
   {
      if (port >= 4) return -1;

      static int pid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4};
      CLoadPort* pPort = (CLoadPort*)getEquipment(pid[port]);
      pPort->sendCassetteCtrlCmd(CCC_PROCESS_START, nullptr, 0, 0, 0, nullptr, nullptr);
      return 0;
   }

   int CMaster::carrierRelease(unsigned int port)
   {
      if (port >= 4) return -1;

      static int pid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
      CLoadPort* pPort = (CLoadPort*)getEquipment(pid[port]);
      pPort->sendCassetteCtrlCmd(CCC_PROCESS_CANCEL, nullptr, 0, 0, 0, nullptr, nullptr);
      return 0;
   }

   int CMaster::getContinuousTransferCount()
   {
      return m_nContinuousTransferCount;
   }

   void CMaster::setContinuousTransferCount(int round)
   {
      m_nContinuousTransferCount = round;
   }
}