1. 修复获取的设备名称带符号导致创建表失败的问题

mrDarker

2025-09-05 2cd08ebfa438de28261f35f13527d23e8e469dee

 SourceCode/Bond/Servo/CMaster.cpp

@@ -506,13 +506,11 @@
            }
            
            // 检查看是否都已经切换到START状态
            /*
            if (!bIomcOk[6]) {
               unlock();
               setState(MASTERSTATE::MSERROR);
               continue;
            }
            */

            unlock();
            if(m_bContinuousTransfer)
@@ -597,52 +595,62 @@
            }


            // 此处检测优先类型和次要类型（G1或G2）
            // 如果其中一Bonder有单个玻璃，优先取它的配对类型，否则无所谓了
            primaryType = MaterialsType::G2;
            secondaryType = MaterialsType::G1;
            // Bonder1、Bonder2、Fliper、VacuumBake、Aligner，统计G2和G1的数量, 配对组数, 多出的类型
            int nG2Count = 0, nG1Count = 0, nGlassGroup, nExtraType;
            if (pBonder1->slotHasGlass(0)) {
               nG2Count++;
            }
            if (pBonder1->slotHasGlass(1)) {
               nG1Count++;
            }

            if (pBonder2->slotHasGlass(0)) {
               nG2Count++;
            }
            if (pBonder2->slotHasGlass(1)) {
               nG1Count++;
            }

            if (!pBonder1->canPlaceGlassInSlot(0) && pBonder1->canPlaceGlassInSlot(1)) {
               // 如果Bonder1有G2了，则取G1
               primaryType = MaterialsType::G1;
               secondaryType = MaterialsType::G0;
            if (pFliper->slotHasGlass(0)) {
               nG2Count++;
            }
            else if (!pBonder2->canPlaceGlassInSlot(0) && pBonder2->canPlaceGlassInSlot(1)) {
               // 如果Bonder2有G2了，则取G1
               primaryType = MaterialsType::G1;
               secondaryType = MaterialsType::G0;

            if (pVacuumBake->slotHasGlass(0)) {
               nG1Count++;
            }
            else if (!pFliper->canPlaceGlassInSlot(0)) {
               primaryType = MaterialsType::G1;
               secondaryType = MaterialsType::G0;
            if (pVacuumBake->slotHasGlass(1)) {
               nG1Count++;
            }
            else if (pBonder1->canPlaceGlassInSlot(0)) {
               // 如果Bonder1没有G2, 则先G2
               primaryType = MaterialsType::G2;
               secondaryType = MaterialsType::G0;

            CGlass* pTempGlass = pAligner->getGlassFromSlot(0);
            if (pTempGlass != nullptr) {
               MaterialsType type = pTempGlass->getType();
               if(type == MaterialsType::G1)
                  nG1Count++;
               else if (type == MaterialsType::G2)
                  nG2Count++;
            }
            else if (pBonder2->canPlaceGlassInSlot(0)) {
               // 如果Bonder2没有G2, 则先G2
               primaryType = MaterialsType::G2;
               secondaryType = MaterialsType::G0;
            nGlassGroup = min(nG1Count, nG2Count);
				
            if (nG1Count == nG2Count) {
               nExtraType = 0;
            }
            else if (nG1Count > nG2Count) {
               nExtraType = 1;
            }
            else {
               primaryType = MaterialsType::G2;
               secondaryType = MaterialsType::G0;
               nExtraType = 2;
            }
            secondaryType = MaterialsType::G0;


            // Measurement -> LoadPort
            if (rmd.armState[0] || rmd.armState[1]) {
               LOGI("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"),
                  rmd.armState[1] ? _T("不可用") : _T("可用"));
            }
            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Unloading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], primaryType, secondaryType);
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], MaterialsType::G1, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     goto PORT_PUT;
                  }
@@ -689,29 +697,29 @@


            // Fliper(G2) -> Bonder
            auto pSrcSlot = pVacuumBake->getProcessedSlot(primaryType);
            //LOGI("<Master>pSrcSlot = %x, primaryType:%d", pSrcSlot, primaryType);
            //m_nTestFlag = 1;
            //pVacuumBake->m_nTestFlag = 1;
            auto pSrcSlot = pVacuumBake->getProcessedSlot(MaterialsType::G1);
            //LOGI("<Master>pSrcSlot = %x", pSrcSlot,);
            if (pSrcSlot != nullptr && !rmd.armState[1]
               && pBonder1->canPlaceGlassInSlot(0)
               && !pBonder1->hasBondClass()) {
               && pBonder1->canPlaceGlassInSlot(0)) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, MaterialsType::G2, MaterialsType::G0, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if (pSrcSlot != nullptr && !rmd.armState[1] 
               && pBonder2->canPlaceGlassInSlot(0)
               && !pBonder2->hasBondClass()) {
               && pBonder2->canPlaceGlassInSlot(0)) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, MaterialsType::G2, MaterialsType::G0, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            //m_nTestFlag = 0
               ;
            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
            if (!rmd.armState[0] && pBonder1->slotHasGlass(0) && !pBonder1->slotHasGlass(1)) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, MaterialsType::G1, MaterialsType::G0);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
            if (!rmd.armState[0] && pBonder2->slotHasGlass(0) && !pBonder2->slotHasGlass(1)) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, MaterialsType::G1, MaterialsType::G0);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
@@ -720,14 +728,14 @@
            // Aligner -> Fliper(G2)
            // Aligner -> VacuumBake(G1)
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType);
               m_pActiveRobotTask = createTransferTask(pAligner, pFliper, MaterialsType::G2, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0]) {
               // m_nTestFlag = 1;
               if (m_nTestFlag == 1) LOGI("createTransferTask 004df %d, %d", primaryType, secondaryType);
               m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType);
               if (m_nTestFlag == 1) LOGI("createTransferTask 004df %d, %d", MaterialsType::G1, secondaryType);
               m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, MaterialsType::G1, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
               m_nTestFlag = 0;
            }
@@ -741,6 +749,17 @@


            // LoadPort -> Aligner
            if (nGlassGroup >= 2) {
               unlock();
               continue;
            }

            if(nExtraType == 0)
               primaryType = MaterialsType::G2;
            else {
               primaryType = MaterialsType::G1;
            }

            for (int s = 0; s < 4; s++) {
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
@@ -917,23 +936,23 @@

            // Fliper(G2) -> Bonder
            auto pSrcSlot = pVacuumBake->getProcessedSlot(primaryType);
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder1->hasBondClass()) {
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder1->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder2->hasBondClass()) {
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder2->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
            if (!rmd.armState[0] && !pBonder1->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
            if (!rmd.armState[0] && !pBonder2->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }
@@ -968,6 +987,12 @@
                  m_pActiveRobotTask = createTransferTask(pLoadPorts[s], pAligner, primaryType, secondaryType, m_bJobMode);
                  if (m_pActiveRobotTask != nullptr) {
                     CGlass* pGlass = (CGlass*)m_pActiveRobotTask->getContext();
                     if (pGlass->getBuddy() != nullptr) {
                        delete m_pActiveRobotTask;
                        m_pActiveRobotTask = nullptr;
                        continue;
                     }

                     pEFEM->setContext(pGlass);
                     pGlass->start();
                     bool bMoved = glassFromQueueToInPorcess(pGlass);
@@ -1123,7 +1148,7 @@
            
            // Bonder1 -> Bonder2
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Fliper_Bonder1)
               && !rmd.armState[0] && !pBonder2->hasBondClass()) {
               && !rmd.armState[0] && !pBonder2->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pBonder1,
                  1, pBonder2, 1);
               if (m_pActiveRobotTask != nullptr) {
@@ -1135,7 +1160,7 @@

            // Fliper(G2) -> Bonder1
            if ((m_nContinuousTransferStep == CTStep_Unknow || m_nContinuousTransferStep == CTStep_Aligner_Fliper)
               &&!rmd.armState[0] && !pBonder1->hasBondClass()) {
               &&!rmd.armState[0] && !pBonder1->hasBondGlass()) {
               m_pActiveRobotTask = createTransferTask_continuous_transfer(pFliper,
                  0, pBonder1, 1);
               if (m_pActiveRobotTask != nullptr) {
@@ -1417,6 +1442,7 @@
               if (m_pActiveRobotTask->getSrcPosition() == EQ_ID_MEASUREMENT) {
                  CGlass* pGlass = (CGlass*)m_pActiveRobotTask->getContext();
                  pGlass->complete();
                  this->saveState();
                  bool bMoved = glassFromInPorcessToComplete(pGlass);
                  if (bMoved) {
                     LOGI("<Master>Glass(%s)从工艺列队到完成列队转移成功.",
@@ -1433,10 +1459,22 @@
                  // 检查PJ是否已经完成
                  CProcessJob* pJob = getGlassProcessJob((CGlass*)m_pActiveRobotTask->getContext());
                  if (pJob != nullptr && checkAndUpdatePjComplete(pJob)) {
                     this->saveState();
                     LOGE("<Master>ProcessJob(%s)完成.",
                        pJob->id().c_str());
                     if (m_listener.onPjEnd != nullptr) {
                        m_listener.onPjEnd(this, pJob);
                     }

                     // 检查CJ是否已经完成
                     ASSERT(m_pControlJob);
                     if (checkAndUpdateCjComplete(m_pControlJob)) {
                        this->saveState();
                        LOGE("<Master>ControlJob(%s)完成.",
                           m_pControlJob->id().c_str());
                        if (m_listener.onCjEnd != nullptr) {
                           m_listener.onCjEnd(this, pJob);
                        }
                     }
                  }
               }
@@ -1754,6 +1792,7 @@
            CGlass* pGlass = m_queueGlasses.front();
            pGlass->start();
            glassFromQueueToInPorcess(pGlass);
            this->saveState();

            // 这里上报Panel Start事件
            if (m_listener.onPanelStart != nullptr) {
@@ -1767,6 +1806,7 @@
            CGlass* pGlass = m_inProcesGlasses.front();
            pGlass->complete();
            glassFromInPorcessToComplete(pGlass);
            this->saveState();

            // 这里上报Panel End事件
            if (m_listener.onPanelEnd != nullptr) {
@@ -1775,10 +1815,23 @@

            CProcessJob* pJob = getGlassProcessJob(pGlass);
            if (pJob != nullptr && checkAndUpdatePjComplete(pJob)) {
               processJobFromInPorcessToComplete(pJob);
               this->saveState();
               LOGE("<Master>ProcessJob(%s)完成.",
                  pJob->id().c_str());
               if (m_listener.onPjEnd != nullptr) {
                  m_listener.onPjEnd(this, pJob);
               }

               // 检查CJ是否已经完成
               ASSERT(m_pControlJob);
               if (checkAndUpdateCjComplete(m_pControlJob)) {
                  this->saveState();
                  LOGE("<Master>ControlJob(%s)完成.",
                     m_pControlJob->id().c_str());
                  if (m_listener.onCjEnd != nullptr) {
                     m_listener.onCjEnd(this, pJob);
                  }
               }
            }
         }
@@ -2446,7 +2499,9 @@
         m_pControlJob = new CControlJob();
         if (!CControlJob::deserialize(ifs, *m_pControlJob)) return false;
      }

      else {
         return false;
      }

      // 读取 ProcessJob 列表
      uint32_t count = 0;
@@ -2483,8 +2538,8 @@
      for (const auto pj : pjs) {
         if (pj->state() == PJState::Queued) {
            pj->start();
            return pj;
         }
         return pj;
      }


@@ -2558,6 +2613,17 @@
      return false;
   }

   bool CMaster::processJobFromInPorcessToComplete(CProcessJob* pProcessJob)
   {
      auto it = std::find(m_inProcesJobs.begin(), m_inProcesJobs.end(), pProcessJob);
      if (it != m_inProcesJobs.end()) {
         m_completeProcessJobs.push_back(*it);
         m_inProcesJobs.erase(it);
         return true;
      }
      return false;
   }

   bool CMaster::checkAndUpdatePjComplete(CProcessJob* pJob)
   {
      ASSERT(pJob);
@@ -2566,10 +2632,26 @@

      for (auto c : pJob->carriers()) {
         for (auto g : c.contexts) {
            CGlass* pGlass = (CGlass*)g;
            if (pGlass->state() != GlsState::Aborted
               && pGlass->state() != GlsState::Completed
               && pGlass->state() != GlsState::Failed) return false;
            auto state = ((CGlass*)g)->state();
            if (state != GlsState::Aborted && state != GlsState::Completed
               && state != GlsState::Failed) return false;
         }
      }

      return pJob->complete();
   }

   bool CMaster::checkAndUpdateCjComplete(CControlJob* pJob)
   {
      ASSERT(pJob);
      auto state = pJob->state();
      if (state != CJState::Executing && state != CJState::Paused) return false;

      for (auto pj : pJob->getPjs()) {
         auto state = pj->state();
         if (state != PJState::Aborted && state != PJState::Completed
            && state != PJState::Failed) {
            return false;
         }
      }