1.获取配方后自动刷新列表； 2.HsmsAction序列化和反序列化，将来用于缓存上报的数据；

LAPTOP-SNT8I5JK\Boounion

2025-07-30 166fa1cb727d6fe6962bbd2b5c4a0c9da6088048

 SourceCode/Bond/Servo/CMaster.cpp

@@ -51,6 +51,9 @@
      m_state = MASTERSTATE::READY;
      m_pActiveRobotTask = nullptr;
      m_nLastError = 0;
      m_isCompareMapsBeforeProceeding = FALSE;
      m_bEnableEventReport = true;
      m_bEnableAlarmReport = true;
      InitializeCriticalSection(&m_criticalSection);
   }

@@ -297,11 +300,12 @@


      // 各种机器
      CLoadPort* pLoadPorts[4];
      CEFEM* pEFEM = (CEFEM*)getEquipment(EQ_ID_EFEM);
      CLoadPort* pLoadPort1 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
      CLoadPort* pLoadPort2 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
      CLoadPort* pLoadPort3 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
      CLoadPort* pLoadPort4 = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
      pLoadPorts[0] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT1);
      pLoadPorts[1] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT2);
      pLoadPorts[2] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT3);
      pLoadPorts[3] = (CLoadPort*)getEquipment(EQ_ID_LOADPORT4);
      CFliper* pFliper = (CFliper*)getEquipment(EQ_ID_FLIPER);
      CVacuumBake* pVacuumBake = (CVacuumBake*)getEquipment(EQ_ID_VACUUMBAKE);
      CAligner* pAligner = (CAligner*)getEquipment(EQ_ID_ALIGNER);
@@ -311,10 +315,10 @@
      CMeasurement* pMeasurement = (CMeasurement*)getEquipment(EQ_ID_MEASUREMENT);

      ASSERT(pEFEM);
      ASSERT(pLoadPort1);
      ASSERT(pLoadPort2);
      ASSERT(pLoadPort3);
      ASSERT(pLoadPort4);
      ASSERT(pLoadPorts[0]);
      ASSERT(pLoadPorts[1]);
      ASSERT(pLoadPorts[2]);
      ASSERT(pLoadPorts[3]);
      ASSERT(pFliper);
      ASSERT(pVacuumBake);
      ASSERT(pAligner);
@@ -544,17 +548,12 @@
               LOGI("Arm1 %s, Arm2 %s.", rmd.armState[0] ? _T("不可用") : _T("可用"),
                  rmd.armState[1] ? _T("不可用") : _T("可用"));
            }
            CLoadPort* pEqLoadPort[] = { pLoadPort1, pLoadPort2, pLoadPort3, pLoadPort4 };
            CEquipment* pEqTar[] = { pVacuumBake, pFliper };
            if (primaryType == MaterialsType::G2) {
               pEqTar[0] = pFliper;
               pEqTar[1] = pVacuumBake;
            }
            for (int s = 0; s < 4; s++) {
               if (!rmd.armState[0] && pEqLoadPort[s]->isEnable()
                  && pEqLoadPort[s]->getPortType() == PortType::Unloading
                  && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToUnload) {
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pEqLoadPort[s], primaryType, secondaryType);
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Unloading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pMeasurement, pLoadPorts[s], primaryType, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     goto PORT_PUT;
                  }
@@ -562,138 +561,65 @@
            }

         PORT_PUT:
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->pick();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            // Measurement NG -> LoadPort
            // NG回原位
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_restore(pMeasurement, pLoadPorts);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // BakeCooling ->Measurement
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bakecooling_to_measurement(pBakeCooling, pMeasurement);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            
            // BakeCooling内部
            // Bake -> Cooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bake_to_cooling(pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Bonder -> BakeCooling
            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder1, pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask_bonder_to_bakecooling(pBonder2, pBakeCooling);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Fliper(G2) -> Bonder
            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[1] && !pBonder1->hasBondClass()) {
            auto pSrcSlot = pVacuumBake->getProcessedSlot(primaryType);
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder1, primaryType, secondaryType, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[1] && !pBonder2->hasBondClass()) {
            if (pSrcSlot != nullptr && !rmd.armState[1] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pFliper, pBonder2, primaryType, secondaryType, 2);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // VacuumBake(G1) -> Bonder
            if (!rmd.armState[0] && !pBonder1->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder1, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0] && !pBonder2->hasBondClass()) {
               m_pActiveRobotTask = createTransferTask(pVacuumBake, pBonder2, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


@@ -701,38 +627,29 @@
            // Aligner -> VacuumBake(G1)
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pFliper, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }

            if (!rmd.armState[0]) {
               m_pActiveRobotTask = createTransferTask(pAligner, pVacuumBake, primaryType, secondaryType);
               if (m_pActiveRobotTask != nullptr) {
                  m_pActiveRobotTask->pick();
                  std::string strDescription = m_pActiveRobotTask->getDescription();
                  unlock();
                  if (m_listener.onRobotTaskEvent != nullptr) {
                     m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
                  }
                  LOGI("创建新任务<%s>...", strDescription.c_str());
                  continue;
               }
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // Aligner -> LoadPort
            if (!rmd.armState[1]) {
               m_pActiveRobotTask = createTransferTask_restore(pAligner, pLoadPorts);
               CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);
            }


            // LoadPort -> Aligner
            for (int s = 0; s < 4; s++) {
               if (!rmd.armState[0] && pEqLoadPort[s]->isEnable()
                  && pEqLoadPort[s]->getPortType() == PortType::Loading
                  && pEqLoadPort[s]->getPortMode() == PortMode::ReadyToLoad) {
                  m_pActiveRobotTask = createTransferTask(pEqLoadPort[s], pAligner, primaryType, secondaryType);
               PortType pt = pLoadPorts[s]->getPortType();
               if (!rmd.armState[0] && pLoadPorts[s]->isEnable()
                  && (pt == PortType::Loading || pt == PortType::Both)
                  && pLoadPorts[s]->getPortStatus() == PORT_INUSE) {
                  m_pActiveRobotTask = createTransferTask(pLoadPorts[s], pAligner, primaryType, secondaryType);
                  if (m_pActiveRobotTask != nullptr) {
                     pEFEM->setContext(m_pActiveRobotTask->getContext());
                     goto PORT_GET;
@@ -741,19 +658,11 @@
            }

PORT_GET:
            if (m_pActiveRobotTask != nullptr) {
               m_pActiveRobotTask->pick();
               std::string strDescription = m_pActiveRobotTask->getDescription();
               unlock();
               if (m_listener.onRobotTaskEvent != nullptr) {
                  m_listener.onRobotTaskEvent(this, m_pActiveRobotTask, ROBOT_EVENT_CREATE);
               }
               LOGI("创建新任务<%s>...", strDescription.c_str());
               continue;
            }
            CHECK_RUN_ACTIVE_ROBOT_TASK(m_pActiveRobotTask);


            unlock();

            continue;
         }
         unlock();
      }
@@ -835,7 +744,7 @@
         if (m_pActiveRobotTask != nullptr) {
            if (m_pActiveRobotTask->getSrcPosition() == p->getID()) {
               CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getSrcSlot());
               if (pGlass != nullptr && port == m_pActiveRobotTask->getSrcSlot()) {
               if (pGlass != nullptr) {
                  CJobDataS* pJobDataS = pGlass->getJobDataS();
                  if (pJobDataS != nullptr
                     && pJobDataS->getCassetteSequenceNo() == pJobDataB->getCassetteSequenceNo()
@@ -879,7 +788,7 @@
            else if (m_pActiveRobotTask->isPlacing() &&
               m_pActiveRobotTask->getTarPosition() == p->getID()) {
               CGlass* pGlass = p->getGlassFromSlot(m_pActiveRobotTask->getTarSlot());
               if (pGlass == nullptr && m_pActiveRobotTask->getTarSlot() == port) {
               if (pGlass == nullptr) {
                  bOk = TRUE;
                  slot = m_pActiveRobotTask->getTarSlot();
                  LOGI("<CMaster>onPreFethedOutJob, 已校验数据一致性.");
@@ -975,6 +884,16 @@
      listener.onProcessStateChanged = [&](void* pEquipment, PROCESS_STATE state) -> void {
         LOGI("<Master>onProcessStateChanged<%d>", (int)state);
      };
      listener.onMapMismatch = [&](void* pEquipment, short scanMap, short downMap) {
         LOGE("<Master-%s>Port InUse, map(%d!=%d)不一致，请检查。",
            ((CEquipment*)pEquipment)->getName().c_str(), scanMap, downMap);
      };
      listener.onPortStatusChanged = [&](void* pEquipment, short status, __int64 data) {
         LOGE("<Master-%s>Port InUse。status=%d, data=%lld", ((CEquipment*)pEquipment)->getName().c_str(), status);
         if (m_listener.onLoadPortStatusChanged != nullptr) {
            m_listener.onLoadPortStatusChanged(this, (CEquipment*)pEquipment, status, data);
         }
      };
      pEquipment->setListener(listener);
      pEquipment->setCcLink(&m_cclink);
      m_listEquipment.push_back(pEquipment);
@@ -1012,6 +931,7 @@
      pEquipment->setID(EQ_ID_LOADPORT1 + index);
      pEquipment->setName(szName);
      pEquipment->setDescription(szName);
      pEquipment->setCompareMapsBeforeProceeding(m_isCompareMapsBeforeProceeding);		
      addToEquipmentList(pEquipment);


@@ -1368,6 +1288,10 @@
      MaterialsType primaryType/* = MaterialsType::G1*/, MaterialsType secondaryType/* = MaterialsType::G2*/,
      int armNo/* = 1*/)
   {
      if (!pSrcEq->IsEnabled()) { 
         return nullptr;
      }

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pTarSlot = pTarEq->getAvailableSlotForGlass(primaryType);
@@ -1392,6 +1316,10 @@

   CRobotTask* CMaster::createTransferTask_bonder_to_bakecooling(CEquipment* pSrcEq, CEquipment* pTarEq)
   {
      if (!pSrcEq->IsEnabled()) {
         return nullptr;
      }

      std::vector<int> slots = {1, 3};

      CRobotTask* pTask = nullptr;
@@ -1413,6 +1341,10 @@

   CRobotTask* CMaster::createTransferTask_bake_to_cooling(CEquipment* pSrcEq)
   {
      if (!pSrcEq->IsEnabled()) {
         return nullptr;
      }

      std::vector<int> slotsTar = { 2, 4 };
      std::vector<int> slotsSrc = { 1, 3 };

@@ -1435,12 +1367,52 @@

   CRobotTask* CMaster::createTransferTask_bakecooling_to_measurement(CEquipment* pSrcEq, CEquipment* pTarEq)
   {
      if (!pSrcEq->IsEnabled()) {
         return nullptr;
      }

      std::vector<int> slots = { 2, 4 };

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot;
      pTarSlot = pTarEq->getAvailableSlotForGlass(MaterialsType::G1);
      pSrcSlot = pSrcEq->getProcessedSlot2(MaterialsType::G1, slots);

      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
         pTask->setContext(pSrcSlot->getContext());
         pTask->setEFEM((CEFEM*)getEquipment(EQ_ID_EFEM));
         taskSeqNo = pTask->setRobotTransferParam(taskSeqNo, 1, pSrcSlot->getPosition(),
            pTarSlot->getPosition(), pSrcSlot->getNo(), pTarSlot->getNo());
      }


      return pTask;
   }

   CRobotTask* CMaster::createTransferTask_restore(CEquipment* pEqSrc, CLoadPort** pPorts)
   {
      if (!pEqSrc->IsEnabled()) {
         return nullptr;
      }

      CRobotTask* pTask = nullptr;
      CSlot* pSrcSlot, * pTarSlot = nullptr, * pTempSlot;
      pSrcSlot = pEqSrc->getInspFailSlot();
      if (pSrcSlot != nullptr) {
         CGlass* pGlass = (CGlass*)pSrcSlot->getContext();
         ASSERT(pGlass);
         int port, slot;
         pGlass->getOrginPort(port, slot);
         pGlass->setInspResult(pPorts[port]->getID(), 0, InspResult::Fail);
         ASSERT(0 <= port && port < 4);
         ASSERT(0 <= slot && slot < 8);
         pTempSlot = pPorts[port]->getSlot(slot);
         if (pTempSlot->getContext() == nullptr) {
            pTarSlot = pTempSlot;
         }
      }


      if (pSrcSlot != nullptr && nullptr != pTarSlot) {
         pTask = new CRobotTask();
@@ -1474,7 +1446,8 @@
      unlock();

      // 当前任务手动中止后，停止调度，需要操作员在解决问题后，重新启动
      stop();
      // 25年7月23日后修改为不停止任务
      // stop();

      return 0;
   }
@@ -1484,6 +1457,18 @@
      lock();
      if (m_pActiveRobotTask != nullptr) {
         m_pActiveRobotTask->restore();
      }
      unlock();


      return 0;
   }

   int CMaster::resendCurrentTask()
   {
      lock();
      if (m_pActiveRobotTask != nullptr) {
         m_pActiveRobotTask->resend();
      }
      unlock();

@@ -1504,4 +1489,48 @@
      pPort->localSetTransferMode((SERVO::TransferMode)transferMode);
      pPort->localAutoChangeEnable(autoChangeEnable);
   }

   void CMaster::setPortCassetteType(unsigned int index, SERVO::CassetteType type)
   {
      ASSERT(index < 4);
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
      CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
      pPort->localSetCessetteType(type);
   }

   void CMaster::setPortEnable(unsigned int index, BOOL bEnable)
   {
      ASSERT(index < 4);
      int eqid[] = { EQ_ID_LOADPORT1, EQ_ID_LOADPORT2, EQ_ID_LOADPORT3, EQ_ID_LOADPORT4 };
      CLoadPort* pPort = (CLoadPort*)getEquipment(eqid[index]);
      pPort->localEanblePort(bEnable);
   }

   void CMaster::setCompareMapsBeforeProceeding(BOOL bCompare)
   {
      m_isCompareMapsBeforeProceeding = bCompare;
   }

   void CMaster::datetimeSync(SYSTEMTIME& time)
   {
      for (auto item : m_listEquipment) {
         item->setDateTime(time.wYear, time.wMonth, time.wDay,
            time.wHour, time.wMinute, time.wSecond);
      }
   }

   void CMaster::enableEventReport(bool bEnable)
   {
      m_bEnableEventReport = bEnable;
   }

   void CMaster::enableAlarmReport(bool bEnable)
   {
      m_bEnableAlarmReport = bEnable;
   }

   bool CMaster::isAlarmReportEnable()
   {
      return m_bEnableAlarmReport;
   }
}