1.接上

chenluhua1980

2026-01-23 08fc60deca0fa2a0658a676d9dd76e0e69436312

 SourceCode/Bond/Servo/CMaster.cpp

@@ -62,6 +62,7 @@
      m_ullStartTime = 0;
      m_ullRunTime = 0;
      m_state = MASTERSTATE::READY;
      m_curveMode = CurveMode::Production;
      m_pActiveRobotTask = nullptr;
      m_nLastError = ER_CODE_NOERROR;
      m_isCompareMapsBeforeProceeding = FALSE;
@@ -138,11 +139,18 @@

   int CMaster::init()
   {
      const ULONGLONG boot_master_begin = GetTickCount64();
      LOGI("<Master>正在初始化...");
      LOGI("[BOOT][MASTER] init begin");


      //    cclink
      if (m_cclink.Connect(CC_LINK_IE_CONTROL_CHANNEL(1)) != 0) {
      const ULONGLONG boot_cclink_begin = GetTickCount64();
      const int cc_ret = m_cclink.Connect(CC_LINK_IE_CONTROL_CHANNEL(1));
      LOGI("[BOOT][MASTER] CC-Link connect ret=%d, cost=%llu ms",
         cc_ret,
         (unsigned long long)(GetTickCount64() - boot_cclink_begin));
      if (cc_ret != 0) {
         LOGE("连接CC-Link失败.");
      }
      else {
@@ -231,11 +239,21 @@


      // 读缓存数据
      const ULONGLONG boot_cache_begin = GetTickCount64();
      const ULONGLONG boot_read_begin = GetTickCount64();
      readCache();
      LOGI("[BOOT][MASTER] readCache finished, cost=%llu ms", (unsigned long long)(GetTickCount64() - boot_read_begin));

      const ULONGLONG boot_state_begin = GetTickCount64();
      loadState();
      LOGI("[BOOT][MASTER] loadState finished, cost=%llu ms", (unsigned long long)(GetTickCount64() - boot_state_begin));
      if (m_listener.onControlJobChanged) {
         m_listener.onControlJobChanged(this);
         notifyControlJobChanged();
      }

      LOGI("[BOOT][MASTER] cache/state loaded, cost=%llu ms (since init %llu ms)",
         (unsigned long long)(GetTickCount64() - boot_cache_begin),
         (unsigned long long)(GetTickCount64() - boot_master_begin));


      // 定时器
@@ -258,7 +276,39 @@


      LOGI("<Master>初始化完成.");
      LOGI("[BOOT][MASTER] init finished, total cost=%llu ms",
         (unsigned long long)(GetTickCount64() - boot_master_begin));
      return 0;
   }

   void CMaster::setCurveMode(CurveMode mode)
   {
      if (m_curveMode == mode) {
         return;
      }
      m_curveMode = mode;
      if (m_pCollector != nullptr) {
         const uint32_t mids[] = {
            MID_Bonder1, MID_Bonder2,
            MID_VacuumBakeA, MID_VacuumBakeB,
            MID_BakeCoolingA, MID_BakeCoolingB
         };
         for (uint32_t mid : mids) {
            if (mode == CurveMode::EmptyChamber) {
               m_pCollector->buffersStart(mid); // 空腔模式：允许无批次直接采样
            }
            else {
               m_pCollector->buffersStop(mid);
               m_pCollector->buffersClear(mid);
            }
         }
      }
      LOGI("<Master>CurveMode=%s", mode == CurveMode::EmptyChamber ? "EmptyChamber" : "Production");
   }

   CurveMode CMaster::getCurveMode() const
   {
      return m_curveMode;
   }

   int CMaster::term()
@@ -1675,6 +1725,15 @@
         }
      };
      listener.onSVDataReport = [&](void* pEquipment, void* pData) {
         const bool allowSvLog =
            (m_state == MASTERSTATE::RUNNING ||
               m_state == MASTERSTATE::RUNNING_CONTINUOUS_TRANSFER ||
               m_state == MASTERSTATE::RUNNING_BATCH ||
               m_state == MASTERSTATE::STARTING);
         const bool allowCurve = allowSvLog || (m_curveMode == CurveMode::EmptyChamber);
         if (!allowCurve) {
            return;
         }
         CSVData* pSVData = (CSVData*)pData;
         auto rawData = pSVData->getSVRawData();
         std::vector<CParam> params;
@@ -2896,7 +2955,7 @@

      this->saveState();
      if (m_listener.onControlJobChanged) {
         m_listener.onControlJobChanged(this);
         notifyControlJobChanged();
      }

      return (int)m_processJobs.size();
@@ -2956,7 +3015,7 @@
      m_pControlJob->setPJs(temps);
      this->saveState();
      if (m_listener.onControlJobChanged) {
         m_listener.onControlJobChanged(this);
         notifyControlJobChanged();
      }


@@ -3077,7 +3136,7 @@
      }
      if (pausedAny && m_listener.onControlJobChanged) {
         // 通知应用层刷新 UI/按钮状态
         m_listener.onControlJobChanged(this);
         notifyControlJobChanged();
      }
      if (pausedAny && !m_bPauseAlarmRaised) {
         std::string desc = CToolUnits::formatString("<PauseEvent CEID=%u>", ceid);
@@ -3392,7 +3451,7 @@

      saveState();
      if (m_listener.onControlJobChanged) {
         m_listener.onControlJobChanged(this);
         notifyControlJobChanged();
      }

      return true;
@@ -3429,7 +3488,7 @@

      saveState();
      if (m_listener.onControlJobChanged) {
         m_listener.onControlJobChanged(this);
         notifyControlJobChanged();
      }

      return true;
@@ -3580,14 +3639,14 @@
         auto& dataTypes = CServoUtilsTool::getEqDataTypes();
         auto& bonderTypes = dataTypes[MID_Bonder1];
         for (size_t i = 0; i < bonderTypes.size(); ++i) {
            m_pCollector->buffersSetChannelName(MID_Bonder1, i + 1, bonderTypes[i].c_str());
            m_pCollector->buffersSetChannelName(MID_Bonder2, i + 1, bonderTypes[i].c_str());
            m_pCollector->buffersSetChannelName(MID_Bonder1, (UINT)i + 1, bonderTypes[(UINT)i].c_str());
            m_pCollector->buffersSetChannelName(MID_Bonder2, (UINT)i + 1, bonderTypes[(UINT)i].c_str());
         }

         auto& vacuumbakeTypes = dataTypes[MID_VacuumBakeA];
         for (size_t i = 0; i < vacuumbakeTypes.size(); ++i) {
            m_pCollector->buffersSetChannelName(MID_VacuumBakeA, i + 1, vacuumbakeTypes[i].c_str());
            m_pCollector->buffersSetChannelName(MID_VacuumBakeB, i + 1, vacuumbakeTypes[i].c_str());
            m_pCollector->buffersSetChannelName(MID_VacuumBakeA, (UINT)i + 1, vacuumbakeTypes[(UINT)i].c_str());
            m_pCollector->buffersSetChannelName(MID_VacuumBakeB, (UINT)i + 1, vacuumbakeTypes[(UINT)i].c_str());
         }

         auto& coolingTypes = dataTypes[MID_BakeCoolingA];
@@ -3595,6 +3654,17 @@
            m_pCollector->buffersSetChannelName(MID_BakeCoolingA, i + 1, coolingTypes[i].c_str());
            m_pCollector->buffersSetChannelName(MID_BakeCoolingB, i + 1, coolingTypes[i].c_str());
         }

         if (m_curveMode == CurveMode::EmptyChamber) {
            const uint32_t mids[] = {
               MID_Bonder1, MID_Bonder2,
               MID_VacuumBakeA, MID_VacuumBakeB,
               MID_BakeCoolingA, MID_BakeCoolingB
            };
            for (uint32_t mid : mids) {
               m_pCollector->buffersStart(mid);
            }
         }
      }
   }